Will running a red light on national highways generally be captured?

2 Answers
VonJames
09/07/25 7:00am
Running a red light on national highways is generally captured. Criteria for determining a red light violation: Electronic monitoring devices capture three photos as evidence for a red light violation: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered a red light violation. How to avoid running a red light while driving: When there are arrow signals, follow the arrow lights; otherwise, follow the circular lights; When the red light is on, the front of the vehicle must not cross the stop line; When the yellow light is on, the front of the vehicle must not cross the stop line; When the green light just starts flashing, if you are close and moving fast, you should proceed, as braking might not stop you in time to avoid crossing the stop line; if you are far away, moving slowly, or the intersection is congested, you should stop; When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line or approach an intersection.
Was this review help?
17
0
Share
VanIvan
09/19/25 6:09am
I've driven on national highways many times and noticed that running red lights is usually captured by cameras. Especially near intersections, many are equipped with electronic eyes or high-definition cameras that automatically recognize license plates and capture violations. For example, a friend of mine was in a hurry and ran a red light, and within a few days, he received a ticket with a fine of 200 yuan and 6 points deducted. The monitoring coverage on national highways around cities is even broader, and even in relatively remote areas, high-traffic sections are well-covered. In fact, it's easier to get caught on rainy days or at night when visibility is poor because the equipment is highly sensitive. I suggest everyone not to take chances—safe driving is the most important. Waiting for a red light only takes a few dozen seconds, saving you fines and trouble.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

What to do if the battery of Trumpchi GS4 leaks?

The solution to the battery leakage of Trumpchi GS4 is: 1. Remove the positive cable of the battery; 2. Wrap the battery in a plastic bag; 3. Check the next ignition situation; 4. Inspect the liquid level; 5. Test the electrolyte density. The Trumpchi GS4 is a compact SUV launched by GAC Motor, with body dimensions of: length 4545 mm, width 1856 mm, height 1668 mm, wheelbase of 2680 mm, and a fuel tank capacity of 55 liters. The Trumpchi GS4 is equipped with a 1.5T turbocharged engine, with a maximum power of 124 kW, maximum power speed of 5000 rpm, and is paired with a 6-speed manual transmission.
13
2
Share

What is the function of shock absorbers?

The function of shock absorbers is to suppress the oscillations caused by the rebound of springs after absorbing shocks and impacts from the road surface. Shock absorbers are used in automobiles to accelerate the attenuation of vibrations in the frame and body, thereby improving the ride comfort of the vehicle. When driving on uneven roads, the shock-absorbing springs can filter out road vibrations. However, the springs themselves still undergo reciprocating motion, and shock absorbers are employed to restrain this spring bouncing. The principle of shock absorbers is as follows: when relative motion occurs between the frame and axle due to vibrations, the piston inside the shock absorber moves up and down, causing the oil in the shock absorber chamber to repeatedly flow from one chamber to another through different orifices. The friction between the orifice walls and the oil, as well as the internal friction between oil molecules, creates resistance to the vibrations, converting the vehicle's vibration energy into heat energy of the oil, which is then absorbed and dissipated into the atmosphere by the shock absorber.
18
1
Share

What are the effects of revving the engine in neutral gear on the car?

The effects of revving the engine in neutral gear on the car are: 1. It subjects the moving parts of the engine to significant inertial forces, affecting the engine's reliability and lifespan; 2. The engine speed increases sharply, causing the stress on moving parts to exceed normal operating levels; 3. It can easily lead to cylinder scuffing and bearing seizure failures; 4. It places excessive load on the transmission gears, potentially causing gear damage in severe cases. The throttle, also known as the air valve or accelerator, refers to the control device that regulates engine power. Neutral gear means the vehicle's gearshift lever is not engaged in any forward or reverse gear, completely disconnecting the transmission from the engine. In manual transmissions, neutral is the middle position, while in automatic transmissions, it is marked with an 'N'.
16
2
Share

What does the 'aoff' in Excelle mean?

Excelle 'aoff' refers to the engine auto start-stop switch. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it automatically when it's time to move forward again. The Excelle is a compact car launched by SAIC-GM Buick. Taking the 2021 Excelle Facelift Classic Automatic Base model as an example, its body dimensions are: length 4609mm, width 1798mm, height 1464mm, with a wheelbase of 2640mm. The 2021 Excelle Facelift Classic Automatic Base model is equipped with a 1.5L naturally aspirated engine, with a maximum power output of 83kW and a maximum power speed of 6000 rpm.
2
2
Share

What to Do If Water Enters the Envision's Engine?

If water enters the Envision's engine, follow these steps: 1. Do not start the engine immediately and tow the vehicle to a safe location; 2. Tow the car to an auto repair shop for servicing; 3. Replace the engine oil and clean related engine components. The Envision is a midsize SUV under SAIC-GM Buick, with body dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, and a wheelbase of 2750mm. The Envision is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124 kW at 5600 rpm, paired with a 7-speed dual-clutch transmission.
6
4
Share

How long is the rear seat when folded down in the Wrangler?

When the rear seats of the Wrangler are folded down, they measure between 950 to 1870 millimeters. To flatten the rear seats, simply press the folding switch located on the shoulder of the seats. The Wrangler is a mid-size SUV with the following body dimensions: length 4334 mm, width 1894 mm, height 1839 mm, a wheelbase of 2459 mm, and a fuel tank capacity of 70 liters. It is equipped with a 2.0L turbocharged engine that delivers a maximum power of 195.4 kW at 5000 rpm. The Wrangler features a four-wheel-drive system and uses multi-link solid axles for both front and rear suspension.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.