Will non-functioning turn signals affect vehicle inspection?
3 Answers
Non-functioning turn signals will affect the annual vehicle inspection. The turn signals of a car are relatively prone to damage, and some vehicles may exhibit rapid flashing frequency, which indicates a malfunction in the turn signals. If the turn signals do not illuminate, the issue is likely related to wiring or fuses, and these should be repaired before the inspection. Below are some related troubleshooting steps: 1. Try activating the hazard lights to see if they work. If they do, the problem likely lies in the turn signal switch. 2. If they don't illuminate, check whether all four turn signals are not working. If the issue is with the bulbs, it is uncommon for all four bulbs (front, rear, left, and right) to fail simultaneously. 3. The most probable cause is wiring or fuse-related problems, so these components should be inspected.
I think the turn signal not working will definitely affect the vehicle inspection, as the purpose of the inspection is to ensure safety, and the turn signal is one of the basic signaling devices. I've participated in some safety standard development work before and found that almost all inspection stations require the turn signal to function properly. If it's broken, other drivers and pedestrians won't be able to clearly understand your intentions, which can easily lead to accidents. Many car owners overlook this small detail before the annual inspection, resulting in a failed test and having to go through the trouble of repairs and re-inspection, wasting both time and money. I suggest developing a habit: check the lights every time you wash the car, operate the turn signal lever to listen for sounds and observe the flashing, so you can identify issues early and avoid trouble. Fixing it is usually not difficult—it might just be a burnt-out bulb or a loose wire—but it's safer to have it handled by a professional shop.
Last year when I took my car for inspection, the turn signal unexpectedly didn't work, and the inspector directly failed it. I had to find a repair shop to replace the bulb on the spot, costing me an extra half day to get it done. From that experience, I learned: the lighting system may seem minor, but it's crucial for safety and compliance—every part must meet standards to pass inspection. Friends, don't be careless like I was; check if your turn signals are working properly before driving. If they flash too slowly or don't light up, it might be a blown fuse or oxidized contacts. You can even try replacing the fuse yourself—it's low-cost and saves you from getting stuck during inspection. Regularly check these small details to ensure smooth and worry-free driving.
