Will leaving a small gap in the window be affected by rain?

What else needs to be replaced when changing motorcycle oil?

When changing motorcycle oil, you also need to replace the oil filter and the air filter. Replacing the oil filter: Replace the oil filter and fuel filter. This can prevent impurities from mixing into the oil and clogging the oil passages during engine operation. Generally, semi-synthetic oil should be changed every 5,000-8,000 kilometers, synthetic oil every 8,000-10,000 kilometers, and mineral oil should not exceed 5,000 kilometers. Replacing the air filter: Replace the air filter. If it wasn't replaced during the 10,000-kilometer maintenance, it must be replaced at the 20,000-kilometer maintenance. The air filter's function is to block dust particles from entering the engine during the intake process. If it was replaced at 10,000 kilometers, it can be cleaned. Checking the brake pads: Check the motorcycle's brake pads for severe wear or oil contamination. Brake pads are generally replaced every 30,000-50,000 kilometers, but they should be checked at 20,000 kilometers. Ask the mechanic how much longer they can be used. If the brakes fail, it can lead to serious consequences and is extremely unsafe.

19

4

Share

Why is the fuel consumption high when the engine is working normally?

There are several reasons for high fuel consumption when the engine is working normally, including tire factors, excessive engine carbon deposits, and a damaged oxygen sensor. Tire factors: Tires are relatively easy to inspect, so they should be checked first. If the tire pressure is insufficient, fuel consumption will increase. If the tire pressure is normal, then check the degree of tire wear. When the tires are severely worn, frequent slipping can occur, which also increases fuel consumption. Excessive engine carbon deposits: If there is a significant buildup of carbon deposits in the engine over a short period, it can also lead to higher fuel consumption. This situation is often caused by the use of substandard fuel. The solution is to add a certain amount of cleaning agent when refueling. If the effect is not noticeable, it indicates a substantial amount of carbon deposits in the engine. In this case, it is best to take the vehicle to a 4S shop or repair shop for professional cleaning of the engine's carbon deposits by a technician. Damaged oxygen sensor: The oxygen sensor, as an internal control unit of the car, primarily monitors the air-fuel ratio of the engine. If it is damaged, it will cause an imbalance in the engine's air-fuel ratio, inevitably leading to abnormally high fuel consumption. When driving, the exhaust pipe may emit darker-colored exhaust gases. In such cases, the oxygen sensor should be replaced as soon as possible.

16

0

Share

Why does the motorcycle jerk when releasing the throttle?

The causes of motorcycle jerking when releasing the throttle include carbon deposits on spark plugs, faults in the high-voltage cap or ignition system, and issues with the plunger-type carburetor. Carbon deposits on spark plugs: It may be caused by carbon deposits on the spark plugs, which create excessive resistance between electrodes and prevent continuous ignition (normal operation resumes after carbon deposits fall off). Faults in high-voltage cap or ignition system: It may be caused by faults in the high-voltage cap or ignition system, resulting in intermittent ignition. If not replaced promptly, the issue will recur. Plunger-type carburetor: It may be caused by a plunger-type carburetor, which can lead to fuel supply interruption during rapid throttle acceleration. Riding motorcycles in cold winter with slippery roads increases the risk of accidents.

20

0

Share

What Documents Are Needed for Green Book Replacement?

To replace the green book, you need to bring the original driver's license, original ID card, a 1-inch white background photo of yourself, a medical examination form, and the replacement fee. The process for replacing the driver's license: Fill out the motor vehicle driver's license application form; the staff will verify the documents, check the demerit points, etc. If there are no issues, the next step is on-site photo taking, with one photo used for the new license; then undergo a medical examination to obtain a motor vehicle driver's physical condition certificate; return to the original processing window for final signing, where the staff will ask you to sign the motor vehicle driver's license application form, collect the replacement fee, print the new driver's license, and the replacement process is completed. Replacement period: Generally, the new license is valid for 6 years. If there is no full demerit record within the first 6 years of validity, the next replacement period will be 10 years; the validity period is marked on the license, and you must personally go to complete the replacement procedures within 3 months before the expiration date.

17

0

Share

Does Castrol Magnetec produce a lot of sludge?

Castrol Magnetec produces a lot of sludge. Common brands of automotive engine oil: Common brands of automotive engine oil include Shell, Mobil, Castrol, Total, etc. When choosing engine oil, car owners need to understand the brands of automotive engine oil and also identify the quality of the oil to avoid misunderstandings in selection, which could affect the normal operation of the engine and lead to abnormal wear. Functions of automotive engine oil: It can lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption for the engine. Precautions for adding engine oil: The quality of the engine oil has a significant impact on the working environment of the engine. The engine operates in high-temperature conditions, continuously repeating mechanical friction movements, and the oil plays a role in cooling, lubricating, and cleaning in this process. Over time, the impurities in the oil increase, and its performance declines accordingly.

13

1

Share

Do headlights have to be replaced in pairs?

Headlights can be replaced individually. Precautions for replacing headlights: Ensure the damaged bulb is fully cooled before replacement to avoid burns. If you are unfamiliar with the replacement process, do not attempt to replace the bulb yourself. Avoid touching the bulb with your fingers, as the heat generated by the bulb can cause fingerprints to evaporate and condense on the bulb's glass, leading to a blurred reflector. When to replace headlights: The performance of your vehicle's lights affects nighttime illumination and is directly related to driving safety. If you notice dimming or poor performance in your headlights, it's best to inspect and replace them promptly. Do not wait until they completely fail, as this could affect normal usage.

13

3

Share

Will leaving a small gap in the window be affected by rain?

What else needs to be replaced when changing motorcycle oil?

Why is the fuel consumption high when the engine is working normally?

Why does the motorcycle jerk when releasing the throttle?

What Documents Are Needed for Green Book Replacement?

Does Castrol Magnetec produce a lot of sludge?

Do headlights have to be replaced in pairs?

What could be the reason for a sudden slight popping sound from the engine?

Can You Drive with Water in the Chassis?

Can Replacing Original High-End Wheels Pass the Annual Inspection?

How to Calculate the Penalty for 'Drive 4 Days, Rest 4 Days'?