···
Log in / Register

Will I receive a text message reminder for traffic violations?

4 Answers
DiEvangeline
09/01/25 6:13am

You will receive a text message reminder for traffic violations. The public security authorities notify vehicle owners of traffic violations through the following methods: 1. By mail. 2. By sending a text message. 3. By email. If you do not receive a text message notification after a traffic violation, you can check it yourself in the following ways: 1. Check at the traffic hall. Go to the office hall of the traffic branch of each city or district and check through the touch query terminal. 2. Check on the external service website of the traffic management bureau. Log in to the external service website of the Public Security Traffic Management Bureau of each city, find the vehicle violation query, enter the license plate number and vehicle engine number, and click query. 3. Call to inquire. Call the voice inquiry number. 4. Send a text message to inquire. Check traffic violations by sending a text message.

Was this review help?
9
0
Share
DeAliyah
09/14/25 2:08am

As an experienced driver who has been behind the wheel for many years, I've found that traffic violation notices are usually sent via SMS alerts. As long as your mobile number is correctly registered with the vehicle or bound through the traffic management app, the system will automatically send you a notification after your violation is captured. I've personally experienced several speeding violations where the SMS arrived on my phone promptly, which was very helpful. However, if you don't receive one, don't panic immediately—it might be because your phone number changed but wasn't updated in the system, or due to poor signal causing a delay. I recommend regularly checking your unread messages or installing the Traffic Management 12123 App, which can push instant notifications in addition to SMS. Don't forget to address violations promptly to avoid accumulating fines and affecting your annual vehicle inspection. By the way, systems vary slightly by region—big cities are faster, while rural areas might be slower, so just be patient. Safe driving is always the priority, but if you do get caught, these SMS alerts serve as your timely warning.

Was this review help?
5
5
Share
Expand All
McKevin
10/28/25 2:52am

Back when I was young and just started driving, traffic violations would indeed trigger SMS alerts, which was quite convenient. Nowadays, the technology is even more advanced. Once you've linked your phone number, you'll automatically get notified if you run a red light or cross the line, for example. However, you must ensure your information is accurate. I once forgot to update my phone number, and the fine ended up doubling before I quickly corrected it in the app. There are other methods too, like checking for violation alerts through WeChat mini-programs or websites. Overall, SMS is the most direct and reliable method, and it's a feature available for almost all vehicles. If you're not receiving SMS alerts, it might be an account issue or system maintenance; it's best to verify your information at the DMV. Just follow the driving rules, and if you occasionally violate them, handling it promptly will give you peace of mind.

Was this review help?
17
5
Share
Expand All
Penelope
12/11/25 3:06am

From a technical perspective, the traffic violation SMS alert is automatically sent by the traffic management system's database. When users register and bind their mobile numbers, the system triggers SMS notifications upon detecting violation records. The principle is straightforward, but occasional glitches like server delays or data mismatches may cause missed messages. In reality, most vehicle owners receive the alerts, typically a few days after the violation occurs. Using a dedicated app for real-time monitoring is recommended for greater reliability. The system is designed to help drivers address issues promptly and avoid further complications. Verifying your binding information is crucial.

Was this review help?
11
0
Share
Expand All
More Forum Discussions

Should the water pump be replaced when changing the timing belt?

It is recommended to replace the water pump along with the timing belt. This is because if the water pump fails in the future, replacing it would require the same labor hours as replacing the timing belt, making it costly. Therefore, it is more economical to replace the water pump during the timing belt replacement. Below is some relevant information about the automotive timing belt: 1. Introduction: The timing belt is crucial for the proper functioning of the engine. If the timing belt fails, the valves and ignition system will stop working, and in severe cases, the cylinder head may also be damaged. As the engine operating time increases, the timing belt and its components, such as the timing belt tensioner pulley, timing belt tensioner, and water pump, will wear out or age. Therefore, it is essential to thoroughly inspect these components during each belt replacement. 2. Precautions: Regular inspections of the timing belt's condition are necessary during use. If cracks are observed on the surface of the timing belt, it may indicate aging. Additionally, any unusual noises while driving should prompt a check to ensure the timing belt is installed correctly.
15
3
Share

What are the symptoms of a faulty car PVC valve?

The manifestations of a faulty PVC valve include blow-by gases remaining in the crankcase, causing corrosion, accelerated wear, and shortening the engine's lifespan. It can also lead to issues such as difficulty starting the engine, idle shaking, weak acceleration, and excessive oil consumption. Below is relevant information: 1. PVC valve: The PCV valve, also known as a one-way valve, is a metering control valve composed of a valve body, valve, valve cover, and spring. It is non-disassemblable and is installed between the engine crankcase ventilation system and the intake system. 2. Crankcase ventilation device: During normal engine operation, a portion of the combustible mixture and exhaust gases will inevitably leak into the crankcase through the gap between the piston, piston rings, and cylinder wall. These gases are high in temperature and carry fuel molecules and other impurities, causing the oil to gradually oxidize, deteriorate, and dilute under high temperatures. The entry of these gases increases the pressure inside the crankcase, leading to oil leaks from seals and gaskets. Therefore, it is essential to promptly expel the gases that have leaked into the crankcase.
8
1
Share

What is the engine oil specification for BYD Song?

BYD Song uses fully synthetic engine oil with the specification 5W-40. Turbocharged engines require at least 5W-30 oil, while some high-performance turbocharged engines can use 5W-40 oil. For later maintenance and oil changes, you can choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain viscosity better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a BYD Song is as follows: Wait for the engine temperature to drop and allow the oil to flow back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a special wrench to remove the oil filter. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add new oil through the engine valve cover filler port. Typically, fill about three-quarters of a standard oil container. Start the engine and let it run for 5 minutes, checking for leaks around the drain plug and oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the dipstick and check that the engine oil level is within the standard range.
9
0
Share

What is the wading depth of the Baojun 560?

The maximum wading depth of the Baojun 560 is 202mm. The wading depth of the Baojun 560 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Baojun 560 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, ensure that the auto start-stop function is turned off to prevent the engine from automatically restarting if the vehicle stalls in the water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not enter the water recklessly; consider alternative routes instead.
7
0
Share

How Long Does It Take to Check the Illegal Record After Running a Red Light?

After running a red light, it usually takes about 3 to 7 days to check the illegal record, with a maximum of around 13 days. However, some cities now offer "instant electronic police capture alerts," where you can receive an SMS notification within 5 to 10 minutes after being captured. But the notification does not equate to a traffic violation; it merely serves as a capture alert. The final determination of whether it is a violation still takes 3 to 7 days. If it is indeed a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive an immediate violation SMS; there is a delay, and the duration may vary. This is because after the electronic camera captures the violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then verified by the relevant staff of the traffic police department. Once confirmed as a violation, the system automatically retrieves the corresponding vehicle owner's mobile phone number based on the license plate information. Only then will the violation details be sent to the owner via SMS. After receiving the violation SMS, the vehicle owner must settle all previous violations within one month before the annual vehicle inspection. Generally, if a vehicle owner suspects they have committed a violation, they can use 15 days as a benchmark. If no violation SMS is received beyond 15 days, it is likely that no violation has been recorded. Methods for Traffic Violation Queries: Traffic violation queries refer to checking motor vehicle violations of traffic management through online or terminal methods. Traffic violation queries can be conducted via traffic violation websites, phone calls, SMS, mobile apps, or offline terminals. Website Query: You can search for "vehicle violation query" and enter your vehicle information to check. Phone Query: You can dial local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the traffic police department where the violation occurred or where the vehicle's license plate was issued. For on-the-spot violations, such as those directly caught by traffic police, they must be processed at the location of the violation. SMS Query: Open the SMS interface on your phone; enter "WZ" followed by your license plate number and color in the message body; send it to 1062650001. Mobile App Query: Open the Traffic Management 12123 APP, log in, click on "Vehicle Violations" to enter the query interface, which displays recent unprocessed violation records. Offline Terminal Query: You can visit the local traffic management hall and use the self-service query machine to enter your license plate number and check recent violation records.
9
2
Share

What is the horsepower of the Volkswagen Tharu?

The Volkswagen Tharu is equipped with a 1.4L turbocharged 4-cylinder EA211-DJS engine, delivering a maximum horsepower of 150Ps. Below are the relevant details about the Volkswagen Tharu: 1. Powertrain: It comes with a 7-speed dual-clutch transmission. 2. Body dimensions: The length, width, and height are 4453mm, 1841mm, and 1632mm respectively, with a wheelbase of 2680mm. 3. Chassis: The drivetrain is front-wheel drive, featuring a McPherson independent front suspension and a multi-link independent rear suspension, with electric power steering.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.