···
Log in / Register

What is the engine oil specification for BYD Song?

6Answers
LeJuliette
09/05/2025, 10:32:58 PM

BYD Song uses fully synthetic engine oil with the specification 5W-40. Turbocharged engines require at least 5W-30 oil, while some high-performance turbocharged engines can use 5W-40 oil. For later maintenance and oil changes, you can choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain viscosity better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a BYD Song is as follows: Wait for the engine temperature to drop and allow the oil to flow back into the oil pan. Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a special wrench to remove the oil filter. Apply oil to the seal of the new oil filter and tighten it clockwise by hand. Add new oil through the engine valve cover filler port. Typically, fill about three-quarters of a standard oil container. Start the engine and let it run for 5 minutes, checking for leaks around the drain plug and oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the dipstick and check that the engine oil level is within the standard range.

Was this review help?
109
Share
RhettDella
09/17/2025, 10:37:53 PM

I've been driving the BYD Song for almost two years now, and I always pay special attention to engine oil selection during maintenance, as it directly impacts engine lifespan and fuel consumption. Based on the official manual and my experience, I recommend SAE 5W-30 full synthetic oil, which is particularly suitable for DM-i hybrid models. It provides moderate viscosity during cold starts, ensuring quick lubrication to reduce wear, while offering strong protection during high-temperature driving. I've tried different brands like Mobil or Shell, and their quality is reliable. Avoid using incorrect specifications such as 10W-40, as it may lead to increased fuel consumption or noise issues. For city driving, the dealership recommends an oil change every 8,000 kilometers, along with a filter replacement to prevent impurity buildup. I've also noticed that in cold regions, choosing 5W-30 with good low-temperature fluidity helps prevent startup delays—a point many fellow Song owners agree on during discussions. Regularly check oil levels and color to ensure safe driving, and never overlook these details to avoid bigger issues.

Was this review help?
17
Share
Expand All
DeElena
10/31/2025, 11:05:07 PM

I often ponder automotive technical knowledge, and engine oil specifications are crucial for engines. The BYD Song typically uses 0W-20 or 5W-30 synthetic oil, where the numbers indicate viscosity grades: the first digit, like 0, represents excellent low-temperature fluidity, making it suitable for winter; the second digit, like 30, indicates strong high-temperature protection. The Song's design optimizes energy efficiency, with low-viscosity oil reducing friction, saving fuel, and extending component lifespan. Full synthetic oil has fewer impurities, and my several test results have been stable. Remember to choose brands with API SN certification to avoid counterfeit risks. When changing the oil, opt for professional service shops and replace the oil filter simultaneously. If driving conditions vary significantly, such as long-distance trips or city traffic jams, it's advisable to check the oil quality every 5,000 kilometers, not exceeding the manual's recommendations.

Was this review help?
19
Share
Expand All
GraceLee
12/14/2025, 10:14:03 PM

I use a BYD Song for school runs, and 5W-30 synthetic oil is perfectly adequate as stated in the manual—simple and straightforward. Avoid other grades to prevent engine damage. At reputable service centers, mechanics adhere to this standard, ensuring safety and peace of mind. Regular maintenance keeps engine noise minimal and fuel consumption stable. Incorrect oil may cause vibrations or increased oil burning. I routinely check oil levels, glancing at dashboard alerts before each drive.

Was this review help?
4
Share
Expand All
McAlan
02/03/2026, 11:08:25 PM

I was discussing the engine oil for the BYD Song with everyone in an online community, and the general recommendation was 5W-30 full synthetic oil, which is compatible with the DM-i system. Actual tests show it can reduce fuel consumption by about 5%, making the engine quieter and smoother. Choose reputable brands like Castrol or Total for guaranteed quality—don’t cheap out on no-name brands. Here’s a handy tip: check if the oil grade matches both cold and hot climates, and always follow the manual’s guidelines—don’t randomly change the plan. For daily driving, this oil makes maintenance simple, with a replacement cycle of around 5,000 kilometers—don’t forget to check the oil filter.

Was this review help?
4
Share
Expand All
Nicola
04/29/2026, 03:30:25 PM

I prioritize eco-friendly driving and choose 0W-20 synthetic oil for my BYD Song. Its low viscosity reduces engine friction, improves efficiency, and lowers emissions. The Song's design is well-suited for this oil, protecting components while supporting green mobility. Regular oil changes maintain cleanliness, preventing pollution and waste; the manual recommends pairing it with energy-saving maintenance. Driving feels smooth with low fuel consumption, and I remind everyone to check oil levels to prevent leaks. Overall, this choice is friendly to both the car and the environment.

Was this review help?
20
Share
Expand All
More Q&A

What to Do If the Vehicle Inspection Validity Period on the Driving License Has Expired?

If the vehicle inspection validity period on the driving license has expired, the owner should drive the vehicle as soon as possible and bring the original vehicle driving license and the original compulsory traffic accident liability insurance certificate valid for more than 15 days to the local vehicle management office where the vehicle is registered to complete the annual inspection procedure. The driving license does not have a fixed validity period because the validity period on the license changes after each annual inspection. Therefore, an expired driving license actually means the vehicle's annual inspection has expired. Vehicle annual inspection refers to the annual examination of vehicles that have already obtained official license plates and driving licenses, conducted in accordance with the technical conditions for the safe operation of motor vehicles. The purpose is to check the main technical conditions of the vehicle, urge the strengthening of vehicle maintenance, ensure the vehicle is always in good condition, and guarantee driving safety.
115
Share

What to Do When a Car Key Falls into Water?

If your car key falls into water, do not press any buttons immediately, as this can cause water to seep into the inner layers more quickly. First, use a dry cloth or paper towel to wipe the surface clean. If you have previously replaced the battery, open the key casing, remove the battery, and use absorbent paper towels to dry any internal moisture. Then, gently wipe the internal button contacts and other parts with high-concentration alcohol and allow it to air dry before reinstalling the battery. Additionally, car owners can place the key in a breathable bag and then put it into a dry rice container, as rice is highly absorbent and can help remove moisture.
119
Share

What is the normal voltage range for a rear oxygen sensor?

The normal voltage range for a rear oxygen sensor is between 0.1 and 0.9 volts. The rear oxygen sensor, also known as the three-way catalytic converter, can malfunction due to the following reasons: 1. Poor fuel quality; 2. Faulty spark plugs; 3. Damaged three-way catalytic converter. Symptoms of a faulty rear oxygen sensor include: 1. Engine idle instability, misfires, or surging; 2. Increased engine exhaust pollution. The oxygen sensor is a critical feedback sensor in the electronic fuel injection engine control system. It plays a key role in controlling vehicle exhaust emissions, reducing environmental pollution, and improving fuel combustion quality in the engine. It is installed on the engine exhaust pipe.
118
Share

How to Adjust the Brightness of the Cadillac XT4 Central Control Screen?

To adjust the brightness of the Cadillac XT4 central control screen, rotate the wheel-shaped knob on the left side of the driver's central console upward. This will adjust the brightness of both the instrument panel and the central control screen. Typically, the brightness of the instrument panel does not require manual adjustment as it automatically adjusts based on the intensity of the external ambient light. Taking the 2021 Cadillac XT4 as an example, it is a compact SUV with body dimensions of 4600mm in length, 1881mm in width, and 1627mm in height, with a wheelbase of 2779mm. The 2021 Cadillac XT4 features a MacPherson strut front suspension and a five-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237PS, a maximum power of 174kW, and a maximum torque of 350Nm, paired with a 9-speed automatic transmission.
115
Share

How many seconds does it take for the Ford Mustang to accelerate from 0 to 100 km/h?

According to official data, the Ford Mustang accelerates from 0 to 100 km/h in 5.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. The Toyota 86 has a maximum torque of 205 Nm and a 0-100 km/h acceleration time of 8.1 seconds. The Mustang's 2.3-liter turbocharged engine delivers 299 horsepower and a maximum torque of 434 Nm, achieving a 0-100 km/h acceleration time of 5.8 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Ford Mustang is equipped with a 10-speed automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Toyota 86 has a power-to-weight ratio of 1.59 horsepower/kg and a 0-100 km/h acceleration time of 8.1 seconds. The Ford Mustang has a power-to-weight ratio of 1.75 horsepower/kg and a 0-100 km/h acceleration time of 5.8 seconds.
104
Share

What are the differences between the Golf 8 Pro and R-Line?

Here are the specific differences between the Golf 8 Pro and R-Line: 1. Maximum Power: The Golf 8 Pro's engine has a maximum power of 85 kW, while the Golf 8 R-Line's engine has a maximum power of 110 kW. Both the Golf 8 Pro and R-Line are equipped with a 7-speed dry dual-clutch transmission. 2. Maximum Torque: The Golf 8 Pro's engine has a maximum torque of 200 Nm, while the Golf 8 R-Line's engine has a maximum torque of 250 Nm. Both models are 5-door, 5-seat hatchbacks with a top speed of 200 km/h and a fuel tank capacity of 51L.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.