Will a broken headlight housing be affected by rain?

1 Answers
McBryce
07/30/25 5:18am
Yes, it will be affected. The specific impacts are as follows: 1. Causing drainage holes to clog: Rainwater can block the drainage holes at the four corners of the window frame. If the rainwater is not drained in time, it will overflow and soak the interior trim panels around the sunroof or the sunroof switch. 2. Leading to water leakage inside the car: The drainage pipes, hidden inside the A, C, or D pillars of the car, are responsible for draining the water that flows into the drainage holes out of the vehicle. If the connection between the drainage pipe and the hole comes loose, the pipe itself is cracked or has holes, the pipe is bent too much, or the pipe is aged, it can cause water leakage. 3. Causing internal vehicle component failures: Water entering the vehicle can wet internal components, leading to short circuits in the internal wiring. If the rainwater has not dried, it may prevent the vehicle from starting.
Was this review help?
14
5
Share
More Forum Discussions

What is the meaning of the Suzuki logo?

Here is an introduction about the Suzuki trademark: 1. Introduction one: The "S" in the Suzuki logo is the first capital letter of "SUZUKI", which gives a sense of infinite power, symbolizing the unlimited development of Suzuki Motor Corporation. 2. Introduction two: Suzuki strives to provide high-quality products to customers worldwide and offers excellent service to customers who use Suzuki products, aiming to establish lifelong trust with each customer. 3. Introduction three: Suzuki is a Japanese surname. Suzuki Corporation was founded in 1920, started producing motorcycles in 1952, and began manufacturing cars in 1955. Suzuki Motor Corporation (SUZUKI) was established in 1954, mainly producing mini cars. Suzuki is also a member of the Toyota Group, and General Motors holds a 10% stake in Suzuki. Suzuki Motor Corporation is one of the earliest car brands to successfully cooperate with Chinese automobile companies.
1
3
Share

Can You Use High Beams on the Highway?

High beams can be used when driving on the highway. Here are the relevant details: 1. Median barrier: Highways have median barriers separating lanes in opposite directions, virtually eliminating the possibility of oncoming traffic. Additionally, vehicles are spaced farther apart, making high beams relatively safer to use. 2. On regular roads: When driving on regular roads, it is correct for drivers to use low beams because speeds are much slower, and low beams provide sufficient visibility within 30 meters ahead. Using high beams indiscriminately on regular roads can be very dangerous.
20
4
Share

What do the tire rating letters represent?

Tire rating letters represent different speed ratings. Here are the detailed explanations: 1. Tire speed rating. The tire speed rating refers to the maximum speed at which a tire can carry a specified load under defined conditions. The speed rating W on a tire represents 270 km/h, V represents 240 km/h, H represents 210 km/h, and Y represents 300 km/h. 2. Higher tire speed ratings are more expensive. Tires with different speed ratings also vary in price. For tires of the same size and specifications, a W-rated tire is definitely more expensive than a V-rated tire because the W-rated tire has a higher load capacity. Additionally, higher-rated W tires not only have the advantage of higher maximum speed but also offer superior durability and resistance.
19
0
Share

How Large of Hail Can a Car Withstand?

Here is an introduction regarding how large of hail a car can withstand: 1. Hail falling from high altitude: It possesses significant kinetic energy and can be destructive, potentially damaging the car's body and windshield, but the extent depends on the hail size. 2. Hail size: For smaller hailstones under 2 cm in diameter, the impact is generally minimal. Cars have a certain resistance capability, and in most cases, no damage will occur. However, larger hailstones, such as those the size of a one-yuan coin, some as big as an egg, or even tennis-ball-sized hailstones, carry substantial weight and can severely damage the car. This includes not only paint scratches but also shattered glass and body dents.
4
0
Share

Is the BMW 525 powerful enough?

BMW 525 has sufficient power. The following is a related introduction to the BMW 525:1. Power: In terms of power, the BMW 525 is equipped with a low-power version of the B48 2.0T engine, which can output 135kW (184PS) and 290N·m of power. The engine's power response is very active, with excellent low-end torque, so the power is absolutely sufficient. 2. Exterior: In terms of exterior design, the BMW 5 Series continues the BMW family-style design language, such as the iconic double-kidney grille at the front, which features a blackened treatment. The dimensions are 5087mm/1868mm/1500mm (length/width/height), with a wheelbase of 3108mm. 3. Interior: The interior of the 2019 BMW 5 Series has been upgraded to be more luxurious. The center console is equipped with a 10-inch LCD display, featuring the latest generation of human-machine interface that supports touchscreen, gesture, voice, and iDrive control methods. The three-spoke multifunction steering wheel is wrapped in genuine leather, providing excellent feel, and supports voice control and cruise control functions. The seats are made of Nappa leather, featuring ventilation functions and headrests. The rear seats are designed with extra padding and can be adjusted electrically.
8
0
Share

How Long Does It Take for a New Car to Complete the Break-in Period?

The break-in period for a new car is generally 1,000 to 1,500 kilometers. Below is a relevant introduction to the break-in period: 1. Definition: The break-in period, also known as the running-in period, refers to the initial driving phase of a new car or a car after a major overhaul, typically covering 1,000 to 1,500 kilometers. This is the essential mileage required to ensure that mechanical components fully contact, friction, adapt, and stabilize. 2. Characteristics: Engine oil quality deteriorates, and fuel consumption increases. Between new parts and components, many metal particles may fall off. These metal particles not only increase wear between parts but also degrade the quality of the engine oil when they mix into it, affecting lubrication performance. Additionally, because new parts experience higher friction resistance during operation compared to normal conditions, fuel consumption tends to be higher.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.