Why was the Wuling Hongguang S1 discontinued?

Is it necessary to return to neutral gear when shifting in Subject 3?

Subject 3 requires returning to neutral gear when shifting. Below is a detailed introduction to the Subject 3 examination: 1. Overview: Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Examination content: The road driving skills test for Subject 3 generally includes: preparation for getting on the vehicle, simulated lighting test, starting, driving in a straight line, shifting gears up and down, changing lanes, pulling over to the side, driving straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting other vehicles, etc.

4

5

Share

Do I need to watch traffic lights when making a U-turn in Subject 3?

1、U-turn and traffic lights: A: If the side of the road center near your driving lane is a dashed line, you don't need to consider the traffic light and can make a U-turn directly. B: If the side of the road center near your lane is a solid line/there is a divider, you need to wait for the green light before crossing the stop line to make a U-turn. 2、U-turn in the innermost straight lane: A: If the innermost lane is a straight lane and the center line of the road is a double solid line, then left turns are absolutely prohibited here, and U-turns are not allowed. B: If the innermost lane is a straight lane, but the side of the center line near your lane is a dashed line, then you can make a U-turn at any time. 3、U-turn in the outermost left-turn lane: In some intersections in real life, due to certain reasons, the outermost lane is set as a left-turn lane. When the left-turn light is on, you can make a U-turn.

19

0

Share

How many points are deducted for failing to start the engine in Subject 3 of the driving test?

The "Motor Vehicle Driver Training Teaching and Examination Syllabus" stipulates that stalling the engine once due to improper operation in Subject 3 results in a deduction of 10 points. If these 10 points are deducted, it means no further mistakes leading to point deductions are allowed in the subsequent procedures. If points have already been deducted before stalling, this stalling will result in failing the examination. After stalling, to start again: press the brake pedal, slowly release the clutch until you feel the car body shaking, as if an arrow is about to be released from the bowstring, then slowly release the brake while keeping the clutch steady with the left foot. When releasing the brake, the car should move forward instead of rolling backward. The intensity of the car body shaking is something you need to feel during practice. Releasing the brake too early may result in insufficient force, causing the car to roll backward, while not releasing the brake when the shaking is very intense may easily lead to stalling.

19

2

Share

Is it necessary to install an engine guard plate for a new car?

It is necessary to install an engine guard plate. Here are the relevant introductions about the engine guard plate: 1. Keep the engine compartment clean: During the operation of the car, it is inevitable to pass through some places with a lot of dust. After installing the engine guard plate, it can prevent road water and dust from entering the engine compartment, keeping the engine compartment clean. It will also be relatively simple to clean without producing excessive oil sludge. 2. Extend the service life of the engine: When the car is driving at high speed, it may roll up sand and stones, which have a relatively large impact on the engine. Over time, it will affect the engine, easily causing engine failure and affecting the service life of the engine. 3. Avoid scratches on the engine: When driving on some uneven roads, there may be a phenomenon of dragging the bottom. After dragging the bottom, it will cause scratches on the car engine. With the engine guard plate, scratches on the engine can be avoided, and the engine can be better protected. If the engine guard plate is damaged, it can be directly replaced. If the engine fails due to dragging the bottom, the maintenance cost may be relatively high.

15

4

Share

Will Points Be Deducted for Rolling Back in Subject Three?

Rolling back in Subject Three will result in point deductions. If the vehicle rolls back less than 30 centimeters during the Subject Three test, 10 points will be deducted. Rolling back more than 30 centimeters will result in failing the test. Details are as follows: 1. Subject Three is part of the motor vehicle driver's license assessment, referring to the road driving skills and safe civilized driving knowledge test. 2. Road driving skills include: preparation before starting, simulated light test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, driving straight through intersections, turning at intersections, meeting vehicles, overtaking, making U-turns, and driving at night, etc. The test content varies depending on the type of vehicle. 3. Safe civilized driving knowledge includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, and knowledge of handling after traffic accidents.

5

Share

Will points be deducted for incorrect steering wheel posture in Subject 3?

Points will be deducted. The following postures will result in point deductions: 1. Looking down at the gear shift: If the student is unfamiliar with the gear positions and instinctively looks down while shifting gears, even for just 0.1 seconds, the system will detect it and report "incorrect driving posture." 2. Shifting gears too quickly: The computer scoring program for Subject 3 is connected to various sensors in the vehicle. The scoring program is designed to first sense the gear lever moving out of the original gear position, then sense the lever in the neutral position, and finally sense the lever moving into the new gear position. If the lever stays in neutral for too short a time and the neutral sensor fails to detect it before shifting to the new gear, the computer will consider it a wrong gear shift and report an error, resulting in point deduction. 3. Not stepping on the accelerator promptly when starting: When starting, first release the clutch halfway, wait for the car body to begin shaking, then release the handbrake. The moment the handbrake is fully released, immediately step lightly on the accelerator to give gas. If the accelerator is not pressed promptly at this time, it may report "incorrect driving posture."

16

0

Share

Why was the Wuling Hongguang S1 discontinued?

Is it necessary to return to neutral gear when shifting in Subject 3?

Do I need to watch traffic lights when making a U-turn in Subject 3?

How many points are deducted for failing to start the engine in Subject 3 of the driving test?

Is it necessary to install an engine guard plate for a new car?

Will Points Be Deducted for Rolling Back in Subject Three?

Will points be deducted for incorrect steering wheel posture in Subject 3?

Will I be fined if one headlight is not working?

Should You Look Left and Right When Passing Oncoming Vehicles in Subject Three?

How many points are deducted for gear and speed mismatch in Subject 3?

What is the braking distance for the Category 3 test?