Why was the Lavida hatchback discontinued?

What is the Principle of a Transfer Case?

The principle of a transfer case: All shafts of the transfer case are supported by two tapered roller bearings, and the bearing tightness is adjusted with corresponding shims. In vehicles equipped with a transfer case, when driving with all wheels on uneven roads or curves, or when the front and rear drive wheels have unequal radii due to tire wear, it will lead to engine power consumption, tire wear, or wear of drivetrain components. To overcome this drawback, the torque is roughly distributed to each drive axle based on the axle load ratio. Some transfer cases are also equipped with an asymmetric planetary gear inter-axle differential with a differential lock. The function of the transfer case is: In multi-axle drive vehicles, a transfer case is installed to distribute the output power to each drive axle. Transfer cases generally have high and low ranges to further expand the gear ratio and the number of gears when driving in difficult terrain.

9

2

Share

Is the Toyota C-HR engine imported?

The Toyota C-HR engine is imported from Japan. The Toyota C-HR is equipped with a 2.0L naturally aspirated engine produced under the TNGA architecture, with the engine model being M20A. In terms of exterior configuration, the Toyota C-HR comes standard with 17-inch alloy wheels, a shark fin antenna, rear privacy glass, automatic headlights, and more. The Leading Edition and higher models are equipped with front fog lights and offer optional features such as a sunroof and two-tone body color. For the interior, the Toyota C-HR includes a standard four-way adjustable multifunction steering wheel, a leather gear shift knob, a 4.2-inch instrument display, and fabric seats. Regarding body dimensions, the Toyota C-HR measures 4360mm in length, 1795mm in width, and 1555mm in height.

4

5

Share

Can I still drive on the road if I lost one license plate?

No. According to China's relevant traffic laws and regulations, a motor vehicle must display both front and rear license plates to be legally driven on the road. If one plate is lost, you should report to the vehicle management office as soon as possible for replacement to prevent illegal use of your plate by others. Relevant information about license plates is as follows: 1. Introduction: License plates, commonly known as vehicle plates, refer to the plates displayed on the front and rear of a vehicle, engraved with the vehicle's registration number, registration region, or other relevant information. 2. Function: License plates serve as identification and information registration for vehicles. Their main purpose is to identify the vehicle's region of registration and to trace the vehicle's owner and registration details through the plate number.

14

1

Share

What Causes the Gear Shifting Mechanism to Fail?

Forcing the gearshift when unable to engage a gear can damage the shifting mechanism. Here are relevant explanations: 1. Gear Shifting: Refers to the transmission system that alters the torque and speed of the engine crankshaft to meet varying requirements for driving wheel traction and vehicle speed under different conditions such as starting, accelerating, driving, and overcoming road obstacles. 2. During Gear Shifting: It's advisable to use the 'double-clutching method'. When upshifting, follow the principle of 'press (clutch), shift to neutral, press (clutch), engage (higher gear)', quickly pressing the clutch pedal twice to smoothly shift to a higher gear.

15

1

Share

What is the standard tire pressure for the Fista?

The standard tire pressure for the Fista: Under normal circumstances, when the car is in a cold state, a tire pressure of around 2.4 is considered normal. A cold state refers to: the car has been parked for at least three hours or the tires have not been driven more than 2 kilometers. The standard tire pressure for a car should be determined based on the manufacturer's recommended value. Low tire pressure will increase tire deformation, enlarge the contact area, accelerate shoulder wear, and easily cause cracks on the tire side. High tire pressure reduces the contact area with the ground, causes severe wear in the middle of the tire, reduces adhesion, makes the car more prone to skidding, and extends the braking distance. The Beijing Hyundai Fista is positioned as a compact car, with body dimensions of 4660mm in length, 1790mm in width, and 1425mm in height, and a wheelbase of 2700mm.

5

0

Share

Is the M20E Engine Imported?

M20A engine is not imported, but there is not much difference in specifications and product quality. The same type of CHR is imported. The following is a detailed introduction about the Toyota IZOA M20A engine: 1. Related data: The Toyota M20C engine has a maximum power of 131kW, peak torque of 207Nm, displacement of 2.0L, and adopts modular design. It uses a bore-stroke ratio of 1:1.2; compression ratio of 13:1; and a 41° angle between intake and exhaust valves, among other modular designs. 2. High compression ratio: To achieve higher thermal efficiency, the Toyota M20C engine adopts a long-stroke setting of 80.5×97.6 (mm) with a high compression ratio of 13:1, reducing fuel consumption and emissions.

14

4

Share

Why was the Lavida hatchback discontinued?

What is the Principle of a Transfer Case?

Is the Toyota C-HR engine imported?

Can I still drive on the road if I lost one license plate?

What Causes the Gear Shifting Mechanism to Fail?

What is the standard tire pressure for the Fista?

Is the M20E Engine Imported?

What is the CHR?

What colors are available for the Hyundai Fista?

How many grades does Castrol engine oil have?

Is the Festa an automatic transmission car?