···
Log in / Register

Can a Class B License Participate in the Study-to-Reduce-Points Program?

6Answers
MacJosiah
07/29/2025, 10:08:41 AM

Any driver's license can participate in the study-to-reduce-points program, with no restrictions on the type of license or the permitted vehicle categories. According to Article 5 of the Notice on the "Work Standards for Reducing Points for Road Traffic Violations through Traffic Safety Education (Trial)" issued by the Ministry of Public Security on January 14, 2020 (Public Traffic Management [2020] No. 14): Motor vehicle drivers applying to participate in traffic safety education to reduce points for traffic violations should participate in corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public welfare activities based on their highest permitted vehicle category and meet the relevant requirements to apply for point reduction. The study-to-reduce-points program is a measure for drivers holding a driver's license who have been penalized with points due to traffic violations. After completing online traffic safety education and passing the exam, they can have their points reduced. This is a convenient public service measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Specific considerations are as follows: Applicable Individuals: Motor vehicle drivers holding a driver's license from the People's Republic of China, regardless of the permitted vehicle category or whether they are commercial vehicle drivers, can participate in the study-to-reduce-points program. They should participate in corresponding road traffic safety laws, regulations, and related knowledge learning and examinations based on their highest permitted vehicle category. Specific Rules: Motor vehicle drivers participating in online road traffic laws, regulations, and related content learning must study continuously for 5 minutes each session. Within 3 days, the cumulative study time must reach 30 minutes, and they must register for an exam within 7 days. Passing the exam will reduce 1 point. Drivers can also attend on-site learning sessions, with each session lasting no less than 1 hour. After completing the required study hours, they can apply for an exam. Passing the exam will reduce 2 points. Drivers can also participate in offline traffic safety public welfare activities. Within 3 days, they must accumulate at least 30 minutes of study time, with each session lasting no less than 5 minutes. Passing the exam will reduce 1 point. The maximum point reduction within one scoring cycle is 6 points. Cases Not Accepted: The following situations will not be accepted: In the previous scoring cycle, the driver had two or more full-point records. Within the last 3 scoring cycles, the driver was involved in hit-and-run accidents, drunk driving, or the use of forged or altered documents or license plates. The driver's license is in the probation period or has not been reviewed as required. The driver has unresolved traffic violation records. The driver has a motor vehicle under their name with an expired safety inspection or not deregistered as required. The driver has already reduced the maximum of 6 points in the current cycle.

Was this review help?
120
Share
MacAsher
08/13/2025, 02:05:01 AM

I've been driving a Class B truck for over ten years. Once, I accidentally exceeded the speed limit and got three points deducted. Later, I heard about the 'study to reduce points' method and decided to give it a try. I downloaded a traffic safety app on my phone and watched some video content, mainly about safety rules and case studies, which were quite practical. The exam afterward wasn't too difficult, and after passing, I got one point reduced, which felt pretty good. The key is that not all violations are eligible for point reduction—serious offenses like overloading or drunk driving don't qualify, only minor mistakes. Overall, it's quite convenient, saving the time of attending training classes, and it reminded me to pay more attention to my driving habits. I'd recommend Class B drivers to take advantage of such opportunities to avoid accumulating too many points.

Was this review help?
20
Share
Expand All
TuckerFitz
10/10/2025, 03:21:00 AM

I usually enjoy studying traffic regulations. Regarding the 'Learn to Reduce Points' policy, it's a newly introduced initiative. It's fully applicable to B-license holders – you can reduce penalty points by studying and taking exams through the app, but there are restrictions. For example, the maximum reduction is six points per year, and points cannot be reduced for speeding over 50% above the limit. The specific process involves downloading the official app, watching video courses covering daily driving safety, and passing the exam. I think this serves as an incentive for drivers, encouraging everyone to prioritize learning and avoid accumulating minor violations that could lead to license suspension. Of course, it's essential to ensure the app is official to avoid scams. Overall, this mechanism is quite user-friendly.

Was this review help?
4
Share
Expand All
BellaRose
11/23/2025, 03:30:11 AM

As a new driver who just got my Class B license, I recently tried the 'Study to Reduce Points' program. It was quite simple—after a friend recommended it, I quickly downloaded the app, studied the basic knowledge, and passed the test, which only had a few multiple-choice questions. I was happy to have one point deducted and felt it was a good way to remedy minor violations. Although the process was short, the content I studied really reminded me to drive carefully, especially since I drive larger vehicles and need to pay extra attention to safety. However, this point reduction isn’t available for every violation—only certain infractions qualify, so it’s important to remember the rules. Overall, it’s worth trying for beginners.

Was this review help?
19
Share
Expand All
VivianFitz
01/13/2026, 10:14:06 PM

I think the 'Learn and Deduct Points' system is not just about reducing points, but also a learning opportunity. Driving a Class B vehicle comes with great responsibility, and I often pay attention to this policy. It uses an app to educate drivers on safety knowledge, helping them reduce mistakes. You can learn about accident prevention, emergency handling, and more. It's great that passing the exam deducts some points. This mechanism encourages everyone to take the initiative to learn and reduce risks. Don't just focus on the points; learn something from it to make the roads safer. Promoting it more would benefit all of us.

Was this review help?
17
Share
Expand All
Francisco
04/10/2026, 01:28:53 AM

Using a mobile phone for the 'Study to Reduce Points' program is super convenient, and it's fully applicable for B license holders. I've tried it on the app—watching videos and simulating scenarios can be done anytime, and points are automatically deducted after the exam. Technology has made this process smarter, eliminating the hassle of visiting traffic departments. You can also check how many points have been deducted, which is clear and easy to understand. It's quite practical for daily driving, especially when minor violations are common for large vehicle drivers. Highly recommend downloading and trying it—efficient and hassle-free.

Was this review help?
2
Share
Expand All
More Q&A

What Does It Mean When the Anti-Skid Light Is On?

Reasons for the anti-skid light being on: 1. Accidentally pressing the ESP off button; 2. Loose or faulty sensor connectors; 3. Short circuit in the wiring or related fuse blown; 4. Software issues causing poor signal transmission; 5. ABS pump failure. The vehicle's anti-skid system uses ABS and ASR electronic control units to calculate and analyze the wheel slip rate and vehicle speed based on signals from the wheel speed sensors. The electronic control unit then adjusts the throttle opening and brake pressure to control the wheel slip rate, preventing the vehicle from skidding during driving.
106
Share

What is the method for replacing the battery in a Peugeot 2008?

The method for replacing the battery in a Peugeot 2008 is as follows: 1. Open the engine hood and locate the battery position; 2. First, disconnect the cable on the negative terminal of the battery, then remove the bracket securing the battery; 3. Disconnect the positive terminal cable and remove the old battery; 4. When installing the new battery, first connect the positive terminal cable, then the negative terminal cable, tighten the screws, and test the vehicle after installation. The Peugeot 2008 is positioned as a compact urban SUV, with body dimensions of 4180mm in length, 1745mm in width, and 1580mm in height, and a wheelbase of 2540mm. In terms of power, the Peugeot 2008 is equipped with a 1.2-liter three-cylinder turbocharged gasoline engine.
102
Share

In which countries can a Chinese international driver's license be used?

Belgium and China mutually recognize each other's driver's licenses, allowing them to be used interchangeably. In the United States, many states recognize Chinese driver's licenses and permit their use. Chinese driver's licenses are allowed for use for one year in countries such as the United Kingdom, Italy, Switzerland, Sweden, France, and New Zealand. In Denmark, a Chinese driver's license can be used for 14 days. Below is more information about driver's licenses: 1. In China, a driver's license is defined as a legal document issued by the administrative authorities after passing the required tests, certifying that the holder has learned and mastered traffic regulations and driving skills, and is permitted to drive certain types of motor vehicles. 2. Before driving abroad, it is necessary to have the Chinese driver's license notarized and translated at a local notary office. Taking Guangzhou as an example, to notarize and translate a Chinese driver's license, one must bring identification documents such as an ID card, household registration booklet, and driver's license to the Guangzhou Notary Office for processing.
105
Share

What Causes the Burning and Noise of the Release Bearing?

Release bearing burning and noise reasons: Burning caused by excessively high working temperatures, commonly seen when drivers habitually use the half-clutch technique, keeping the clutch in a semi-engaged and semi-disengaged state. This causes dry friction heat from the clutch to transfer to the release bearing, leading to the thinning and loss of lubricating grease until the temperature reaches a certain level, resulting in burning damage. The clutch release bearing is installed between the clutch and the transmission. The release bearing housing is loosely fitted on the tubular extension of the transmission's first shaft bearing cover. A return spring ensures that the shoulder of the release bearing always presses against the release fork and retracts to the rearmost position, maintaining a gap of approximately 3 to 4mm with the end of the release lever.
107
Share

Which holds its value better, the Mercedes-Benz E300 with the large emblem or the upright emblem?

The large emblem and upright emblem do not affect the resale value. There are four main factors that influence resale value: 1. Brand Influence: Brand influence is one of the decisive factors for resale value. Currently, the luxury brands with the best resale value in the market are Mercedes-Benz, BMW, and Lexus, while Audi is in the middle range. Luxury brands like Cadillac, Infiniti, and Acura have relatively lower resale values. 2. Market Presence: The market presence of a car, which is the result of accumulated sales over the years, also plays a role. Generally, the higher the market presence of a model, the higher its resale value. However, some niche cars with special value (e.g., Renault Mégane RS, Mitsubishi EVO9) also have very high resale rates. The Mercedes-Benz E-Class has a high market presence, so its resale value is also relatively high. 3. Configuration and Color: Top-tier models tend to depreciate faster than mid- or low-tier models of the same series due to their higher initial prices. 4. Accident History: If a car has been involved in a major accident and its structure has been damaged, its depreciation rate will increase significantly. If the car is in its original condition with no major accidents, the resale price will be higher.
115
Share

How to Judge the Distance of the Rear Car When Reversing Using Rearview Mirrors?

When reversing, the rearview mirror can be divided into four parts, with the outer 1/4 being the danger zone and the inner 3/4 being the safety zone. When the rear car occupies 1/3 of the right rearview mirror, the distance is approximately 15 meters. When the rear car occupies half of the right rearview mirror, the distance is about 10 meters. When the rear car occupies half of the right rearview mirror, the distance is very close, and turning operations are not advisable. Specific details are as follows: 1. Judging the distance of the rear car using the interior rearview mirror: If the lower edge of the rear car's tires is visible, the distance between the rear car and the front car is about 20 meters. At this distance, the safe speed is approximately 25 km/h. If the upper edge of the rear car's headlights is visible, the distance from the rear trunk to the rear car is about 3.5 meters. If the junction between the rear car's hood and the front windshield is visible, the distance from the rear trunk to the rear car is 1 meter. If the horizontal one-third of the rear car's front windshield is visible, it is very close. 2. Judging the distance of the rear car using the right rearview mirror: If the rear car occupies half of the rearview mirror and only half of its body is visible, the distance is very close. You should maintain your current lane and avoid turning. 3. Judging the distance of the rear car using the left rearview mirror: If the rear car's body has entered the danger zone to the left of the dotted line in the rearview mirror, it indicates that the distance is very close, and turning is not advisable at this time.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.