Why is there abnormal noise when the car window rolls up?

Should You Apply Tint Film to a Sunroof?

Sunroofs are generally made of tinted glass, which already provides some level of UV protection. Applying tint film to a sunroof can increase the glass thickness, and if not installed properly, may lead to difficulties in opening and closing the sunroof or affect its sealing performance. Therefore, it is generally not recommended to apply tint film to a sunroof. Here are the details: Standard Sunroof: For a standard car sunroof (not a panoramic sunroof), it is advisable not to apply tint film, as the glass usually already has UV protection and heat insulation properties. Adding film would be redundant and may even distort the light coming through the sunroof. Additionally, the increased glass thickness from the film could cause operational issues if the installation is not done correctly. Panoramic Sunroof: However, for panoramic sunroofs, applying tint film is recommended. Due to their larger surface area, panoramic sunroofs absorb significantly more heat—two to three times more than standard sunroofs—making it necessary to control the temperature inside the car. That said, not all panoramic sunroofs are suitable for tinting. If the sunroof glass is already tinted, avoid colored films to maintain the vehicle's aesthetic. Similarly, if the sunroof has black enamel dots, refrain from applying film.

11

1

Share

Can You Take Subject Four Without Passing Subject Two?

You cannot take Subject Four without passing Subject Two. Here is the relevant information: Order: The examination sequence follows Subject One, Subject Two, Subject Three, and Subject Four in order. Only after passing the previous subject can you proceed to the next one. Exam Content: Applicants for a motor vehicle driver's license must pass the following four subjects: Subject One (Road Traffic Safety Laws, Regulations, and Related Knowledge), Subject Two (Field Driving Skills), Subject Three (Road Driving Skills), and Subject Four (Safe and Civilized Driving Knowledge).

6

5

Share

What Causes the Locking Phenomenon in Electric Tricycle Brakes?

Tricycle brake locking indicates that the brakes are too tight. Here is relevant information: Drum brakes: Two semi-circular brake shoes are installed inside the wheel hub. The "lever principle" is used to push the brake shoes, causing them to come into contact with the inner surface of the hub and generate friction. This produces sufficient friction to reduce the wheel's rotation speed, achieving the braking effect. Disc brakes: A brake caliper controls two brake pads to clamp the brake disc on the wheel. When the brake pads clamp the disc, friction is generated between them to reduce the wheel's rotation speed, allowing the vehicle to slow down or stop. ABS Anti-lock Braking System: Most modern vehicles are equipped with an ABS anti-lock braking system, which ensures that the vehicle maintains directional control while braking without skidding or sliding. The principle of ABS is equivalent to manually creating intermittent braking, but this intermittent braking technology operates at a higher frequency and faster speed. Therefore, when a vehicle with ABS encounters an emergency, the brakes must be firmly pressed down in one motion.

16

5

Share

What are the hazards of starting the engine without pressing the brake?

Except for models with one-button start, most other models can start the engine without pressing the brake. Strictly speaking, starting the engine without pressing the brake will not cause any damage to the car. However, for manual transmission models, if the gear is not in neutral before starting, the vehicle may lurch forward during ignition and collide with objects, causing damage. Additional information is as follows: Starting a manual transmission model with the brake pressed: This is the default operation method. Early manual transmission models could hardly ensure that the gear was in neutral and the clutch was fully depressed when starting. To prevent the dangerous phenomenon of the vehicle lurching forward during startup, it was common practice to press the brake when starting. With the advancement of technology, many manual transmission models now have sensors installed on the clutch pedal, preventing the vehicle from starting unless the clutch pedal is fully depressed. Therefore, current manual transmission models require both the clutch and brake to be pressed before starting. Essentially, automatic transmission vehicles will not experience lurching during startup as long as they are in P (Park) or N (Neutral) gear. However, people have brought the habit of driving manual transmissions to automatic transmissions. Gradually, some automatic transmission models have also been designed to require the brake to be pressed for startup.

5

3

Share

Is driving without the physical driver's license considered unlicensed driving?

If you have completed the driver's license test and passed, but have not yet received the physical driver's license, driving on the road is considered unlicensed driving. Here is relevant information: Penalty 1: If a motor vehicle driver allows someone without a driver's license or whose license has been revoked or temporarily suspended to drive, the driver's license will be confiscated, and the license may also be revoked. Penalty 2: Driving a motor vehicle without a driver's license, or during the period when the license is revoked or temporarily suspended, or allowing someone without a license or whose license has been revoked or temporarily suspended to drive, will result in a fine imposed by the traffic management department of the public security authority, and may also include detention for up to 15 days.

13

3

Share

Can You Submit the Test Paper Early in Subject One?

After completing Subject One, you can submit the test paper directly, and there is no time limit for submission. The duration of the Subject One test is 45 minutes. The full score for Subject One is 100 points, and the passing score is 90 points. Subject One refers to the theoretical driver's test, which is conducted at the vehicle management office and is a mandatory licensing exam that all driver's license applicants must pass. Subject One Test Process: Follow the instructions of the staff to receive your personal driving school file in order in the waiting area; carry and present your ID card for inspection by the supervising officer; mobile phones must be turned off when entering the test area; no loud talking is allowed in the test area; no textbooks or materials are allowed in the test area (or must be placed in your bag); After the test, collect and keep your ID card, and submit the file to the "Submission Window" at the front of the test area; students who pass the test will sign under the guidance of the staff at the exit of the test area before leaving; students who fail the test can leave the test area immediately and wait for their driving school to notify them of the retake time.

12

4

Share

Why is there abnormal noise when the car window rolls up?

Should You Apply Tint Film to a Sunroof?

Can You Take Subject Four Without Passing Subject Two?

What Causes the Locking Phenomenon in Electric Tricycle Brakes?

What are the hazards of starting the engine without pressing the brake?

Is driving without the physical driver's license considered unlicensed driving?

Can You Submit the Test Paper Early in Subject One?

What to Pay Attention to When Driving for the First Time?

How Much Shock Oil Should Be Added to a Motorcycle?

What Causes Fuel Cut-off in EFI Motorcycles?

Is 60 km/h considered fast for a motorcycle?