Why is the sunroof of the Tiguan leaking?

2 Answers
Lynne
08/28/25 5:41am
The reasons for the sunroof leakage in the Tiguan are as follows: Sunroof drain outlet blocked by debris: This prevents rainwater from draining out, causing it to gradually seep into the car. Use a towel to clean the drain outlet thoroughly to ensure rainwater drains smoothly to the ground. Damaged sunroof seal: This results in poor edge sealing, allowing rainwater to enter the car. For a damaged sunroof seal, the solution is to replace it with a new one. Gaps in the Tiguan sunroof frame: Gaps in the sunroof frame allow rainwater to seep into the car. If the vehicle is still under warranty, the most straightforward solution is to replace the sunroof frame.
Was this review help?
15
5
Share
AdamMarie
09/10/25 4:04am
I've encountered the issue of my Tiguan's sunroof leaking multiple times, usually due to clogged drainage holes. The small tubes in the corners of the sunroof accumulate dust, leaves, or small insects, causing water to backflow. Aging sealing strips are also a common problem—when the rubber cracks and doesn't seal properly, rainwater seeps into the car. I recommend checking it yourself first: use a thin wire to gently poke the drainage holes, but avoid applying too much force to prevent damaging the pipes. Rinsing the pipes with soft water is also a good solution. If the leak persists, take it to a repair shop for professional help—they have tools like air blowers to clear blockages or can replace the sealing strips. Don't ignore this issue, as it can lead to moldy interiors, electrical shorts, and higher repair costs, not to mention unsafe driving in the rain. Regular maintenance of the sunroof system is key. Parking away from trees to reduce debris buildup has saved me a lot of trouble and money. If the leak is severe, pull over safely, turn on your hazard lights, and prioritize safety.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

How many cylinders does the Audi RS7 engine have?

Audi RS7's engine is an 8-cylinder, arranged in a V configuration. The vehicle is equipped with a 4.0T twin-turbocharged engine, delivering a maximum power of 412 kW and a maximum torque of 700 Nm. The engine reaches its peak power at 6,800 rpm and peak torque at 5,500 rpm. The Audi RS7 is a mid-to-large-sized car under the Audi brand, featuring a distinctive front design with a prominent double-opening grille, abstract LED headlights, and two small round central lights. Another notable feature of the car is its scissor-style gull-wing doors, inspired by certain Lamborghini models, extending to the rear of the body and covering the rear wheel arches.
3
2
Share

What is the light with an exclamation mark inside a semicircle?

It is the tire pressure monitoring indicator light. The tire pressure monitoring indicator light stays on, usually due to one of the following four situations: 1. Puncture causing the tire pressure monitoring light to illuminate: This situation typically involves very slow air leakage, making it difficult to immediately identify which tire is affected. You can use a tire pressure gauge to measure the pressure (front tires: 2.3 bar, rear tires: 2.5 bar). If the pressure is low, inflate the tire and then observe the tire pressure warning light. If it lights up again after a few days, take the vehicle to a 4S shop for inspection. 2. The tire pressure monitoring light may also illuminate due to excessive tire pressure: Standard tires: 2.4-2.5 bar; reinforced tires: 2.8-2.9 bar; the maximum pressure should not exceed 3.5 bar. If any tire exceeds 3.0 bar, it will trigger the tire pressure monitoring light. 3. Driving for too long with low tire pressure can cause the tire pressure monitoring light to illuminate: If a tire has low pressure, high-speed driving will increase the tire temperature, leading to a rise in pressure. In this case, stop and rest immediately or replace the tire with a spare. 4. The tire pressure monitoring light may illuminate due to prolonged lack of inflation, causing the pressure to drop below 1.8 bar. If the tire pressure monitor does not alert you in time, the monitor itself may be faulty. If the ignition switch is ON/START and the indicator light and TPMS light both illuminate for 2 seconds before turning off, it may indicate that the vehicle's original receiver has not been properly learned and bound, or that the receiver controller was replaced without being learned and bound.
7
5
Share

Is Water in the Engine Serious?

Water in the engine is very serious. Do not attempt to start the engine; instead, call a professional for repairs. Below is relevant information: 1. Definition: A car engine is the device that provides power to the vehicle, serving as the heart of the car and determining its power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, car engines can be classified into diesel engines, gasoline engines, electric vehicle motors, and hybrids, among others. 2. Maintenance: Car engines require regular maintenance. When driving through areas that are particularly humid or have excessive dust, it is also necessary to inspect and maintain the relevant components of the engine.
15
0
Share

What does 'Key Programmed 2' mean?

Key Programmed 2 indicates the pairing process between the vehicle's dynamic password system and the smart key. Below is relevant information about the instrument cluster: 1. Concept: The car instrument cluster is a device that reflects the working status of various vehicle systems. Common indicators include fuel level warning light, washer fluid indicator, electronic throttle light, front/rear fog lamp indicators, and warning lights. 2. Speedometer/Odometer: The speedometer actually consists of two gauges. One is the speed indicator, and the other is the mileage counter. The odometer is a digital instrument that operates through the engagement of counter drum gears with the worm gear on the speedometer drive shaft, causing the counter drum to rotate. Its characteristic is that the upper-level drum completes one full rotation.
18
1
Share

What Fault Does the EPS and ABS Light Indicate?

EPS and ABS lights indicate the following faults: 1. EPS: EPS stands for Electric Power Steering, an abbreviation of the English word electric-steering. If the ESP fault indicator light is on, it may indicate a malfunction in the vehicle's ESP system. It is recommended to immediately reduce driving speed, avoid excessive steering and turning, and have the fault diagnosed with a specialized diagnostic tool at a 4S shop as soon as possible to analyze the specific location of the fault. 2. ABS: ABS is short for Anti-lock Braking System. Its function is to automatically control the braking force during vehicle braking, preventing the wheels from locking up and maintaining a state of rolling and sliding (with a slip ratio of about 20%) to ensure maximum wheel-to-ground adhesion. If the ABS light is on, it indicates an abnormality in the vehicle, and the ABS anti-lock braking system is not functioning properly. Immediate inspection is required to avoid safety issues.
7
5
Share

Where is the interior ambient light broken if it doesn't light up?

If the interior ambient light doesn't light up, it could be due to the vehicle not being powered on preventing the ambient light from turning on or issues with the car's wiring. Here are the specific details:1. Introduction: As an accessory applied to automotive interiors, ambient lights are interior lamps used to enhance the in-car atmosphere. Owners can set the color and brightness of the ambient light according to their needs, providing a good experience effect.2. Function: These ambient lights usually come in colors such as red, blue, green, and others, making the cabin more dazzling at night, enhancing the atmosphere, and creating indoor ambiance. They have many positive effects on both the in-car atmosphere and the vehicle's occupants.3. Safety Note: However, it's important to note that these ambient lights could potentially affect normal driving. If the lights flash too quickly or are too bright, they may distract the driver, creating safety hazards. Therefore, when setting up ambient lights, they must not interfere with normal safe driving.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.