Why is the reversing image inverted?

What is the difference between Volkswagen G12 and G13 antifreeze?

Volkswagen has two types of antifreeze, namely G12 and G13. The main differences between the two are as follows: 1. Performance: Both have the same functions of antifreeze, anticorrosion, and anti-boil. 2. Color: There is not much difference in color. 3. Usage: Volkswagen vehicles manufactured before 2018 generally use G12 antifreeze, while those manufactured after 2018 mostly use G13 antifreeze as the factory standard. 4. Ingredients: Compared to G12, G13 antifreeze contains additional chemical agents to prevent leakage. If there is a minor leak in the cooling system, it may not require repair as the antifreeze can automatically seal the leak point.

10

0

Share

Where to Stick the Car Door Shock Absorber Shim?

It should be stuck at the place where the door is closest to the body sheet metal when closed. Below is some related information about car door shock absorber shims: 1. Function: They prevent the shock absorber from coming into contact with the car body. When the car turns and the center of gravity shifts to one side, causing the body to tilt and compress the springs, the shims provide support, thereby reducing the car's body roll. 2. Materials Used: The shims are made of paper, rubber sheets, or copper sheets, serving as sealing materials placed between two flat surfaces to enhance sealing. They act as sealing elements installed between static sealing surfaces to prevent fluid leakage. They are attached to the car body using adhesive, and the adhesive materials are mostly very mild, so they will not cause damage to the car body's surface.

3

2

Share

Is there a specific requirement for the installation position of ETC?

The ETC is generally installed in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, it is installed in the lower middle part. The appropriate installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 to 90 degrees. For vehicles with anti-explosion film or those that have it installed later, it may affect the signal transmission of the microwave communication link, and thus should be installed in the microwave skylight strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply, the vehicle owner needs to provide valid ID and vehicle registration certificate (original and photocopy). If the application is not made by the owner, the agent's valid ID is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls is also needed, and the vehicle must be registered under the name of an individual aged between 18 and 60. Documents required for company vehicles: Introduction letter from the vehicle owner (with official seal); Copy of the organization code certificate or business license (with official seal); Original ID of the agent; Original vehicle registration certificate; The vehicle that needs to apply for ETC. Here are some precautions for ETC installation: Do not block the view. It is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spot. Install it behind the rearview mirror on the right side to avoid blocking the view. Do not affect charging: The ETC electronic tag consumes power, but generally does not need to be charged or have its battery replaced, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and do not install it where the solar panel might be easily blocked. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal guide rod, connected to a switch below. After the electronic tag is installed, the windshield will press the anti-removal guide rod in. If it is removed casually, the anti-removal guide rod will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to go to an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device.

18

5

Share

How to check your car's PIN code?

You can inquire about your car's PIN code at a 4S shop. Every car has a unique PIN code, which is returned to the owner during the handover of a new car. Of course, the 4S shop also keeps a copy and can check it on their computer. Here is some relevant information about the car PIN code: 1. The use of the car PIN code: The car PIN code is commonly used for matching performance after replacing important components, clearing fault codes, and matching car keys. 2. The method to read the PIN code is as follows: Dealers can read the anti-theft device identification code from the control unit, then apply to query the password. The car company will then send the database scheduling data to the dealer. It is the production identification code of the car, ensuring the vehicle's security.

20

2

Share

Is Aozoom a domestic brand?

Aozoom is a German brand but manufactured domestically, with its production company being Guangzhou Yuezhao Auto Lamp Co., Ltd. Below are the specific details about Aozoom: 1. Aozoom, whose English name is Aozoom, originates from Germany and is an international automotive lighting trademark. Aozoom is a combination of 'Auto' and 'zoom', where 'Auto' means car and 'zoom' represents magnification and infinity, symbolizing Aozoom's broad prospects. 2. Guangzhou Yuezhao Auto Lamp Co., Ltd. adheres to technological innovation, aiming to be a pioneer in the automotive lighting industry and leading the development of international automotive lighting. The company mainly produces digital ballasts, HID xenon lamps, HID lenses, LED lenses, LED turn signals, LED interior lights, and other automotive lighting products.

8

5

Share

What does RPM mean?

RPM stands for revolutions per minute, which indicates the number of rotations the engine makes in one minute. The engine's RPM is directly related to the number of work cycles per unit time or the effective power output of the engine, meaning the effective power varies with different RPM levels. Here is some relevant information about car RPM: 1. Definition of rated condition: When specifying the effective power of an engine, the corresponding RPM must also be indicated. The operating condition of an engine at its rated power and rated RPM is called the rated condition. 2. Adjust to the economical RPM range: Most car engines have an economical RPM range where the engine operates more fuel-efficiently. When driving, the gear must match the engine's RPM and driving speed.

11

4

Share

Why is the reversing image inverted?

What is the difference between Volkswagen G12 and G13 antifreeze?

Where to Stick the Car Door Shock Absorber Shim?

Is there a specific requirement for the installation position of ETC?

How to check your car's PIN code?

Is Aozoom a domestic brand?

What does RPM mean?

How to use the electronic gear lever of the Bestune T77?

Are Car GPS Jammers Useful?

Must the cracked taillight cover be replaced?

What Causes the Car Turn Signal to Suddenly Flash Faster?