Why is the reverse radar of Corolla Hybrid not working?

2 Answers
VanPaislee
07/24/25 9:18am
The reasons why the reverse radar of Corolla Hybrid is not working are as follows: Radar itself problem: If the reverse radar is not working, first check whether the power cord of the host is properly connected and there is no current, then check whether the radar host line is loose. If there is no problem, the issue may lie with the radar itself. Check the bumper line connection: When the reverse radar is not working, first check whether the bumper line connection is intact, then check whether the reverse light is on when shifting to reverse gear. If not, check whether the reverse light connection switch is disconnected. Check whether the computer displays a fault code: You can check whether the computer displays a fault code. If these items are fine, then check whether there is a problem with the reverse radar itself.
Was this review help?
10
4
Share
LaLyla
08/11/25 4:42am
I've been driving a Corolla Hybrid for several years, and the reverse radar not beeping is actually quite common. It needs to be examined from several technical points. First, the radar sensors on the rear bumper can easily get covered with mud or dust, blocking the signal transmission. I usually wipe them carefully with a wet cloth, and they typically recover. Second, a blown fuse—there's a dedicated radar fuse in the car's fuse box. If it blows, the sound stops. The manual has a location diagram, and you can replace it yourself, but it's safer to go to a professional shop. Third, a control module malfunction—the hybrid's low-speed electric drive mode might reduce the module's sensitivity. Check the wiring or have a technician diagnose it. There's also a settings issue—the radar function might have been accidentally turned off in the central control menu. Make sure it's enabled. All these need to be checked step by step; don't rush to reset the system to avoid messing with the wiring. Lastly, the Corolla Hybrid's quiet design sometimes affects radar performance. Consulting a dealership is the most reliable option since reversing safety is no joke.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What type of batteries does BYD use?

BYD vehicles utilize two types of batteries: ternary lithium batteries and lithium iron phosphate batteries. The primary difference between these two batteries lies in their cathode materials. Below are the distinctions between these battery types: 1. The cathode of lithium iron phosphate batteries is made from lithium iron phosphate, while the cathode of ternary lithium batteries is composed of ternary materials. Ternary lithium batteries boast higher energy density and are lighter in weight, making them more suitable for passenger vehicles. Consequently, most pure electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs) employ ternary lithium batteries. Before venturing into automobile manufacturing, BYD was already a battery producer and had become the world's second-largest manufacturer of rechargeable batteries. 2. BYD offers a wide range of pure electric vehicles and plug-in hybrid vehicles. Additionally, BYD-manufactured pure electric buses have been exported for international use. Plug-in hybrid vehicles differ from conventional hybrid vehicles in that the latter cannot be charged using an external power source, whereas plug-in hybrids can recharge their power batteries externally. Plug-in hybrids exhibit longer range in pure electric mode compared to conventional hybrids, and their total range often exceeds that of standard pure electric vehicles. In China, plug-in hybrid vehicles are classified as new energy vehicles and are eligible for green license plates. Many consumers have purchased plug-in hybrid vehicles encouraged by national policies.
8
1
Share

What Parts Get Burned When Car Battery is Connected Backwards?

Consequences and countermeasures for reversing car battery terminals are as follows: 1. For vehicles with ECU-controlled systems, the ECU remains powered continuously. If terminals are reversed, these circuits will be the first to burn out, potentially damaging sensors as well. 2. There are two possible outcomes when circuits burn: either they burn open (circuit breaks) or burn short. If burned open, the damage stops there; if burned short, it will continue damaging other electrical components until a fuse blows. 3. Circuit burnout happens instantaneously - by the time smoke appears, multiple components may already be damaged with unpredictable consequences. 4. Inspection should begin with checking fuses, then battery voltage. After correct battery installation and power-on, observe dashboard displays, test electrical components (lights, horn, alarm, radio, power windows etc.), start the engine to check displays, and test AC system. Any malfunctions require repair, with ECU and sensors being most vulnerable. 5. Battery disconnection causes data loss requiring 4S dealership initialization, commonly called decoding or code matching.
8
4
Share

What documents are required for vehicle registration?

New vehicle registration requires the following documents: 1. Original and photocopy of the identity proof of the vehicle owner. For corporate vehicles, the original and a photocopy of the "Enterprise Code Certificate" with the company seal, a "Power of Attorney" with the company seal, and the original and photocopy of the trustee's identity proof are required. For personal vehicles, the original and photocopy of the owner's "Resident Identity Card" are required. 2. Original certificate of compliance for the whole vehicle's factory production or original import certificate for imported vehicles. (For non-exempt models, a safety technical inspection certificate is also required.) 3. Original proof of vehicle origin, including the purchase invoice. 4. Original third copy of the compulsory traffic accident liability insurance certificate. If the original is lost, any other copy with the insurance company's seal is acceptable. 5. Original vehicle purchase tax payment certificate or tax exemption certificate. 6. If an agent is handling the registration, the original and photocopy of the agent's identity proof must also be presented. 7. For vehicles such as fire trucks, ambulances, and engineering rescue vehicles, a proof of vehicle usage nature issued by the relevant authority is required. 8. Other original or photocopied certificates and documents required by laws and administrative regulations during vehicle registration.
14
3
Share

What does rear mean in a car?

The rear button on a car typically appears in the air conditioning system and serves as the rear windshield defogger button. Nowadays, many car models omit the English word "rear" and simply use an icon instead. Below are some relevant details: 1. On the rear windshield of a car, you will notice thin copper wires, which are heating elements. Pressing the rear button activates these heating wires to defog the rear windshield. 2. Usually, the rear windshield defogger switch automatically turns off after about ten minutes to protect the heating elements. 3. Most cars currently on the market are equipped with a rear windshield heating function. While the button location may vary, the functionality remains the same. After turning on the rear windshield heating switch, the fog on the rear windshield typically disappears within about a minute.
18
3
Share

What Happens If a Car Lacks Coolant?

If a car lacks coolant, the coolant warning light on the dashboard will illuminate. Coolant Replacement Method: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way hose. The five-way hose is named for its five connecting interfaces to various parts. Coolant flows through the five-way hose and is distributed to different parts of the car to function. If there is any coolant leakage in this section, replace the hose or re-secure the interface as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue adding water to the reservoir so that water continuously flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink tint. Continue adding clean water until the drained water runs clear. Note: Don’t forget to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose—this allows the coolant to flow quickly into the radiator. Then, add another bottle of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the cooling system. Top up the coolant to the "MAXT" mark on the reservoir.
3
5
Share

How to use the dash cam in Audi A4L?

Audi A4L dash cam operation instructions are as follows: 1. Power on/off: Long press the power button to turn on or off. 2. Photo mode: After powering on, press the mode button to select photo mode, then press OK button to take photos. 3. Video recording mode: The DVR automatically enters recording state after powering on, with recording indicator blinking. 4. Preview mode: After powering on, press the mode button to select preview mode, use up/down buttons to select video files, press OK to play/pause, press mode button to exit. 5. Screen display switching: After DVR powers on, press the switch button to toggle between front camera display, rear camera display, and dual-camera simultaneous display. 6. Infrared night vision: While powered on, press the right button to turn rear camera infrared lights on/off. 7. Charging: The DVR can be charged via DC5V charger, USB5V charger or computer USB port. Red indicator stays on during charging and turns off when fully charged. 8. Connecting to computer (USB flash drive function): Connect DVR to computer using USB cable, select USB-Disk option on DVR display interface, then press OK to enter USB drive mode. 9. Screen saver: During standby or recording, briefly press power button to turn screen saver on/off.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.