Why is the reputation of Hongqi H5 not good?

Can You Still Drive with 5% Oil Life Remaining?

You can still drive with only 5% oil remaining, but the distance you can travel depends on the type of oil used (mineral oil, semi-synthetic oil, or full synthetic oil). For example, when using mineral oil with 5% oil life remaining, you can typically drive up to 250 kilometers. Functions of Engine Oil: Friction Reduction: A sufficiently thick oil film separates the surfaces of sliding parts, thereby reducing wear. Sealing: Engine oil forms a seal between the piston rings and pistons, reducing gas leakage and preventing contaminants from entering. Rust Prevention: Lubricating oil adheres to part surfaces, protecting them from contact with water, air, acidic substances, and harmful gases. Cushioning: When cylinder pressure rises sharply, the load on pistons, piston rings, connecting rods, and crankshaft bearings increases suddenly. The lubricated bearings help cushion this impact load. Cleaning: High-quality engine oil carries away carbon deposits, sludge, and worn metal particles from engine parts back to the oil pan, flushing away contaminants through oil circulation. Precautions for Oil Change: Drain oil when hot for better fluidity; Fill to the dipstick mark; Choose oil change intervals based on vehicle condition, road conditions, oil quality, and driving habits; Select oil based on driving environment, frequency, and engine requirements—prefer higher quality over lower.

12

5

Share

What is the issue with post-processing wiring harness abnormalities?

Post-processing wiring harness abnormalities are caused by poor contact or issues with the wiring, such as open circuits or grounding. Below is a detailed introduction to wiring harness abnormalities: Causes: Natural damage to the wiring harness during use may occur due to prolonged product usage, leading to aging of the entire wiring and cracking of the insulation layer, which reduces the mechanical strength performance. Impact: A decrease in the mechanical strength of the wiring harness can easily cause open circuits and short circuits between wires, directly resulting in the burning of the wiring harness, oxidation deformation, poor contact, and ultimately causing the equipment to malfunction.

14

1

Share

Where is the fender of a car located?

The fender is located above the front wheels on both sides of the car, specifically the protruding wheel arch section. Functions of the fender: 1. According to fluid dynamics, it reduces the drag coefficient, making the car drive more smoothly. 2. During driving, it prevents sand, gravel, and mud kicked up by the wheels from splashing onto the underbody of the car. Here are some details about the fender: 1. The fender is the outer body panel that covers the wheel, named for its resemblance to a bird's wing in older car designs. It is divided into front and rear fenders based on installation position. The front fender is installed at the front wheel and must ensure the maximum space for wheel rotation and movement. 2. Designers use a 'wheel travel diagram' based on the selected tire size to verify if the fender's design dimensions are appropriate. 3. The rear fender doesn't face issues with wheel rotation interference, but for aerodynamic purposes, it is slightly arched and protrudes outward. 4. Nowadays, some cars have fenders integrated into the main body, manufactured in one go. However, some cars, especially those with front fenders, have them as separate components for easier replacement, given the higher likelihood of front fender collisions.

5

2

Share

Does the car accelerate faster after changing the transmission fluid?

Changing the transmission fluid will not result in a noticeable improvement in acceleration. Effects of not changing transmission fluid: It causes the transmission fluid to become thicker, reducing oil pressure and hindering internal heat dissipation, leading to excessively high oil temperatures. This shortens the lifespan of both the transmission and drivetrain components. Failure to change the transmission fluid may result in sluggish starts and frequent slipping during driving. Prolonged neglect of transmission fluid changes can cause the fluid to deteriorate and evaporate under high-speed and high-temperature conditions, accelerating component wear and damaging internal transmission parts. Factors affecting vehicle acceleration: The speed of vehicle acceleration is related to the performance of the ignition system, proper tire pressure, and engine torque.

18

3

Share

Can Carbon Fiber Be Repaired?

Carbon fiber can be repaired, typically through painting treatment. Here are specific details about carbon fiber: 1. Introduction: Carbon fiber (CF or graphite fiber) is a fiber with a diameter of approximately 5-10 micrometers, primarily composed of carbon atoms. Carbon fiber boasts several advantages, including high stiffness, high tensile strength, low weight, high chemical resistance, high-temperature tolerance, and low thermal expansion. 2. Advantages: Carbon fiber utilizes carbon fiber-reinforced polymer composites. Resin-based composites reinforced with carbon fiber exhibit excellent corrosion resistance, fatigue resistance, lightweight yet high-strength characteristics, with superior strength and stiffness compared to aluminum alloys. Aluminum alloys are more prone to corrosion than carbon fiber composites.

1

4

Share

Is the Audi Q5L Considered a Luxury Vehicle?

Audi Q5L is classified as a luxury vehicle. Below is an introduction to the Audi Q5L: 1. Positioning: The Audi Q5L is positioned as a luxury midsize SUV, with a 2.9-meter wheelbase suitable for both family and commercial use. The panoramic sunroof also provides an excellent sense of openness for rear passengers. 2. Interior: The interior of the Audi Q5L has seen several updates. Upon entering the cabin, the most striking feature is the replacement of the embedded central control screen from the older model with a floating design. The steering wheel has been changed to a four-spoke style, offering a more superior feel. The full LCD instrument panel boasts a cool interface, high resolution, and clear display of various parameters, making everything easily visible. 3. Gear Shift Mechanism: The gear shift has been upgraded to a push-pull electronic gear lever, adding a more upscale touch. The operating system has been enhanced with the new MMI featuring a gesture touch panel, making it more convenient for the driver to use. 4. Engine: The Audi Q5L also features new changes in its engine. Although it still uses a 2.0T engine, it is now divided into two versions: high and low power. The high-power version delivers 185 kW, while the low-power version offers 140 kW, providing a balanced combination of performance options.

18

3

Share

Why is the reputation of Hongqi H5 not good?

Can You Still Drive with 5% Oil Life Remaining?

What is the issue with post-processing wiring harness abnormalities?

Where is the fender of a car located?

Does the car accelerate faster after changing the transmission fluid?

Can Carbon Fiber Be Repaired?

Is the Audi Q5L Considered a Luxury Vehicle?

Where is the oil filter located on a BMW 525?

What are the interior space dimensions of the Volkswagen Lavida?

How Many Kilometers Should a Car Run Before Replacing Spark Plugs?

Will the front license plate be captured by electronic surveillance if lost?