Why is the Corolla so value-retaining?

1 Answers
LaKennedy
07/29/25 6:42pm
Corolla's good value retention is mainly due to its relative advantages in reliability and economy, as well as its good reputation. The following is an introduction to vehicle value retention: 1. Concept: Car value retention rate has always been an important part of car cost performance. The so-called value retention rate refers to the ratio of the selling price of a certain model after a period of use to its original purchase price, which depends on multiple factors such as the car's performance, price fluctuation range, reliability, spare parts prices, and maintenance convenience, reflecting the comprehensive level of the car. 2. Advantage: It is less affected by price reduction trends, allowing consumers to bear smaller economic losses caused by product depreciation.
Was this review help?
5
3
Share
More Forum Discussions

Where is the oil filter located on the Chery Arrizo 5?

The oil filter of the Arrizo 5 is located at the rear of the vehicle's engine. Below is information about the function of the oil filter: The oil filter serves to remove impurities, gums, and moisture from the engine oil. Here are some extended details about the Arrizo 5: 1. Taking the 2021 Arrizo 5 as an example, it belongs to the compact car category, with body dimensions of 4572mm in length, 1825mm in width, and 1482mm in height, a wheelbase of 2670mm, a fuel tank capacity of 48 liters, and a curb weight of 1325kg. 2. The 2021 Arrizo 5 features a MacPherson strut front suspension and a torsion beam rear suspension. 3. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 90PS, a maximum power output of 66kW, and a maximum torque of 130Nm, paired with a 5-speed manual transmission.
3
2
Share

Where is the BMW 320 OBD interface located?

The BMW 320 OBD diagnostic interface is located near the driver's footwell. Bend down, position your head near the clutch area, look upwards while using a flashlight, and you will see the interface, which is the OBD port. OBD translates to "On-Board Diagnostics" in English. Below is relevant information about OBD: 1. "OBD-II" stands for On-Board Diagnostics II. To standardize the diagnosis of emissions and drivability-related faults, starting from 1996, all new vehicles sold in the U.S. must have similar diagnostic tools, fault codes, and repair procedures, complying with OBD-II regulations. With increasing economic globalization and automotive internationalization, OBD-II systems, as the foundation for drivability and emissions diagnostics, are being implemented and applied more widely. 2. OBD devices monitor multiple systems and components, including the engine, catalytic converter, particulate filter, oxygen sensors, emission control systems, fuel system, EGR, etc. 3. OBD connects various emission-related component information to the Electronic Control Unit (ECU), which has the capability to detect and analyze emission-related faults. When an emission fault occurs, the ECU records the fault information and related codes, and alerts the driver by illuminating the malfunction indicator lamp.
5
3
Share

How to Open the Front Hood of a Volvo S90?

To open the front hood of a Volvo S90, follow these steps: 1. There is a switch located near the driver's left leg in the Volvo S90. Pulling this switch will open the hood slightly, creating a small gap. 2. After activating the switch inside the car, the front hood will pop open just enough to insert your hand. 3. Slightly off-center at the front, you will find a yellow button. Reach in and pull this button to fully open the engine hood. Below is a detailed introduction to the functions of the engine hood: 1. Airflow guidance. The hood helps direct airflow, reducing air resistance and increasing the downward force on the front wheels, which enhances driving stability. 2. Protection for the engine and surrounding components. The hood's strength and construction are designed to shield against impacts, corrosion, rain, and electrical interference, ensuring the engine, electrical circuits, oil lines, braking system, and transmission are protected from external damage. This maintains the vehicle's proper functioning. 3. Assisting driver visibility. The hood helps drivers judge the distance between the front of the car and other vehicles or obstacles, preventing collisions. It is particularly useful when parking.
9
2
Share

Is There Any Impact If the Electric Vehicle Charger Is Not Unplugged After Full Charge?

Leaving the electric vehicle charger plugged in after a full charge can have negative effects. If the power is not disconnected in time, prolonged floating charge can cause severe water loss and impact the battery's lifespan. Charging Precautions: Generally, after the electric vehicle charger turns green, an additional 1-2 hours of floating charge is sufficient. The total charging time should typically be controlled within 8-10 hours and should not exceed 12 hours. Overnight charging often exceeds 12 hours. Overcharging an electric vehicle battery can lead to excessive gas generation, which erodes the battery plates, causing active material shedding and ultimately reducing the battery's service life. Battery Lifespan: Under ideal conditions, the number of charging cycles can reach approximately 1,000-2,000 while maintaining over 70% of usable capacity. For PHEVs (Plug-in Hybrid Electric Vehicles), a single charge cycle typically covers about 50-80 kilometers. Therefore, before the battery reaches the end of its life, it can generally provide around 100,000 kilometers of pure electric driving.
5
0
Share

How to Check the Production Date of Car Tires CmD?

On one side of the tire, there is usually a DOT mark embossed. The last four digits of this mark provide information about the production date. 1. It consists of four digits "AABB", where the first two digits "AA" indicate the week of the year, and the last two digits "BB" indicate the year.
11
5
Share

What is the width of a single traffic lane in meters?

The width of a single lane on urban roads is 3.5 meters. Quasi-expressway width standards: A four-lane bidirectional expressway is 2X7.5 meters, a six-lane bidirectional expressway is 2X11.25 meters, and an eight-lane bidirectional expressway is 2X15 meters. Expressways are classified as high-grade highways. According to the "Technical Standards for Highway Engineering" issued by the Ministry of Transport of China, an expressway is defined as "a road that can accommodate an average annual daily traffic volume of more than 25,000 passenger cars, is exclusively for high-speed divided-lane vehicle traffic, and has fully controlled access." Road width standards: Each lane on urban roads is 3.5 meters wide, diversion lanes at intersections are 2.3-2.5 meters per lane, trunk roads (including expressways) have a lane width of 3.75 meters, and shoulders (emergency stopping lanes on expressways) are 1.5-2.5 meters wide. Each lane at expressway toll stations is 2.5 meters wide, and when necessary, an extra-wide toll lane of more than 3.5 meters must be established to maintain smooth traffic flow.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.