Why is the car wiper not spraying water?

Does Dongfeng Honda have the Accord?

The Accord is a model produced by GAC Honda. The Accord entered China in 1999 with the sixth generation, and now it is already the tenth generation. In terms of appearance, the new Accord is very stylish, with significant changes compared to previous models. The Accord has gradually transformed from a mature and steady appearance to one full of youthful vitality and dynamism, better aligning with the aesthetics of young people. Relevant information about joint-venture cars is as follows: 1. Introduction: A project jointly established by Chinese and foreign investors. The Chinese side contributes by providing land and factory usage rights, as well as capital, while the foreign investors provide the brand, technology, capital, talent, etc. Joint-venture cars are the products of such collaborations. Foreign parties provide technology, talent, brand, etc., for assembly in China, but the core technology is still controlled by the foreign side. 2. Joint-venture brands under the FAW Group include: FAW-Volkswagen, FAW-Audi, FAW-Mazda (all produced in Changchun, Jilin), and FAW-Toyota (produced in Changchun, Jilin; Tianjin; and Chengdu, Sichuan).

14

4

Share

Do you need to wait for a red light when making a U-turn?

If there is a U-turn signal light and it is red, you must wait; otherwise, it will be considered running a red light. According to the "Road Traffic Safety Law," this will result in: 6 penalty points and a fine of 200 yuan. If there is no U-turn signal light, and the gap is marked with a dashed line, the U-turn is not affected by the traffic signal and does not require crossing the pedestrian crossing. If the gap is marked with a solid line, the U-turn must cross the pedestrian crossing and is subject to the left-turn signal light. Making a direct U-turn may result in being photographed or penalized by on-site traffic police. If you need to cross the pedestrian crossing to make a U-turn, you must yield to pedestrians: Pedestrians walking on the right side of the road's crosswalk, not reaching the centerline of the road. Vehicles on the left side of the road should slow down and, on the premise of ensuring safety, allow pedestrians to pass through the crosswalk. Pedestrians waiting outside the boundary line of the motorized and non-motorized lanes. If they have not entered the roadway, vehicles should slow down and, on the premise of ensuring safety, allow them to pass through the crosswalk. When pedestrians cross the boundary line between the motorized and non-motorized lanes, vehicles that do not stop and yield are committing a violation and should be penalized. After pedestrians enter the motorized lane along the crosswalk, vehicles should slow down and, on the premise of ensuring safety, allow them to pass through the crosswalk. If vehicles do not stop and yield, it is a violation and should be penalized. Pedestrians waiting at the centerline of the road without entering the motorized lane. If vehicles do not stop and yield, it is a violation and should be penalized. Pedestrians crossing the centerline of the road and entering the lane. If vehicles do not stop and yield, it is a violation and should be penalized. Roads with a green belt separating pedestrians in the middle. When pedestrians are waiting in the central stopping area of the road, vehicles must slow down and, on the premise of ensuring safety, allow them to pass through the crosswalk. Scenarios where U-turns are allowed: Intersections with U-turn signs: If there is a clear U-turn sign at the intersection, a U-turn can be made. If there is a U-turn signal light, follow its instructions. If there is no signal light, make the U-turn based on the specific situation, ensuring it does not interfere with other vehicles or pedestrians. Intersections without explicit "No U-turn" or "No Left Turn" signs: If there is no clear prohibition, a U-turn can be made. "No explicit prohibition" means the intersection has no "No U-turn" or "No Left Turn" signs, and the centerline is not solid. In such cases, U-turns are permitted. Yellow grid lines also allow U-turns: Yellow grid lines are no-parking zones marked at intersections prone to congestion due to temporary stops, important unit entrances, and other necessary locations. Any vehicle stopping on these lines (including waiting for traffic lights) is a violation. Although parking is prohibited in yellow grid zones, U-turns are allowed as long as there is no central barrier. Yellow grid lines without barriers are equivalent to "U-turn permitted." Intersections with U-turn signal lights: This is straightforward—if there is a U-turn signal light, follow it. Only proceed on green. When "No Left Turn" and "U-turn permitted" signs appear together: U-turns are allowed, but left turns are prohibited. Note that "No U-turn" is not the same as "No Left Turn." Precautions when making U-turns at intersections: Observe road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable U-turn location. If there is a "No Left Turn" sign ahead, even if "No U-turn" is not mentioned, U-turns are not allowed at that intersection because U-turns inherently involve left turns. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not permitted at that intersection. Always yield to straight-moving vehicles when making a U-turn. Only proceed if it does not interfere with their normal flow. Otherwise, you will bear full responsibility for any accidents. Near intersection stop lines, lanes usually have guiding arrows for vehicle direction. The leftmost lane does not always have a left-turn arrow. On some roads, if the arrow is straight, U-turns are not allowed even if there are no explicit "No U-turn" signs.

9

0

Share

What grade of gasoline is suitable for the CX-5?

CX-5 should use 92-octane gasoline, as this is the recommended fuel grade specified in the vehicle's official owner's manual. In addition to checking the owner's manual for the appropriate gasoline grade, you can also find this information on the fuel filler cap, which will be clearly marked. Typically, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is even higher, 98-octane gasoline is recommended. However, with the use of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade, as high-compression engines can also be tuned to use lower-octane fuel. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the CX-5 is occasionally filled with the wrong gasoline grade, simply switch back to the correct grade after the tank is empty. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles designed for lower-octane fuel, using higher-octane gasoline will not cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher-octane fuel, using lower-octane gasoline can cause engine knocking. The significantly lower octane rating lowers the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unstably. Mild knocking may only increase noise without significant engine damage, but noticeable knocking indicates severe engine conditions. The vibrations not only affect driving stability but can also cause abnormal wear on the pistons and cylinders, potentially leading to cylinder scoring in severe cases.

13

4

Share

What is the fuel consumption per 100 kilometers for the Tiguan L330?

Tiguan L330 is equipped with a 186 horsepower engine, with an official fuel consumption of 6.6L per 100 kilometers. The fuel tank capacity of the Tiguan L330 is 60L, and the distance it can travel on a full tank is 60/6.6*100=909km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, will increase fuel consumption. The car itself: Cars with larger displacement engines generally consume more fuel than those with smaller displacement engines because larger displacement usually means greater power, requiring more gasoline to burn and perform work. Cars with greater weight will have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during a cold start, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

3

1

Share

Can Different Types of Brake Fluid Be Mixed?

Brake fluid should not be mixed. Different types and brands of brake fluid contain varying compositions, and mixing them can lead to a decline in performance and chemical reactions, which may reduce the braking effectiveness of the vehicle and negatively impact the fluid's temperature resistance, compromising driving safety. Brake fluid is a functional liquid used to stop wheel rotation, serving to transmit energy while also providing anti-corrosion, anti-rust, and lubrication benefits. Types of brake fluid: Castor oil-alcohol type, made from refined castor oil and low-carbon alcohol; Synthetic type, formulated with ethers, alcohols, esters, and additives for lubrication, oxidation resistance, rust prevention, and rubber swelling resistance; Mineral oil type, produced from refined light diesel fractions with thickeners added. Precautions for using automotive brake fluid: If gasoline, diesel, or engine oil accidentally mixes into a synthetic brake fluid-based braking system, the incompatibility between fluids can reduce braking effectiveness. For vehicles driven normally for 40,000 kilometers or with brake fluid used continuously for over two years, the fluid may degrade due to prolonged use, so timely replacement is essential. Vehicles equipped with a brake fluid level warning device should monitor whether the warning light is flashing and if the sensor is functioning properly. When the brake fluid is low, it should be replenished promptly. Stored brake fluid should be maintained between the marked minimum and maximum capacity levels. If the brakes exhibit inconsistent performance during normal driving, the brake fluid should be replaced immediately. Before replacement, clean the braking system thoroughly with alcohol. If the vehicle pulls to one side during braking, conduct a comprehensive inspection of the braking system. If the wheel cylinder rubber cups are excessively swollen, it may indicate poor-quality brake fluid. In such cases, replace the fluid with a higher-quality option and also replace the rubber cups. During seasonal changes, especially in winter, if braking performance declines, the brake fluid grade may not be suitable for winter conditions. When replacing, choose a brake fluid with lower viscosity at low temperatures. Do not mix different types or brands of brake fluid. For braking systems with specific requirements, use the designated brake fluid brand. Since formulations vary across brands and types, mixing can degrade performance. Even brands labeled as compatible or interchangeable may not perform satisfactorily, so avoid long-term mixed use. If water or impurities are found in the brake fluid, replace or filter it immediately to prevent insufficient braking pressure and compromised braking performance. Regularly replace brake fluid: The volume of brake fluid changes with temperature, so the reservoir has a vent hole. Air drawn in through this hole may contain moisture or contaminants, which can lower the boiling point of the fluid. During prolonged braking, the system heats up, increasing the risk of vapor lock due to compressed air, leading to reduced braking force or failure. For safety, brake fluid must be replaced periodically.

11

2

Share

What are the symptoms of aging ignition coils?

Ignition coil aging manifests as follows: Engine vibration: During operation, the engine may exhibit intermittent shaking, accompanied by symptoms such as sluggish acceleration. Increased fuel consumption and reduced power: As the spark plug's firing capability weakens, the combustion of the air-fuel mixture in the engine becomes incomplete, leading to adverse effects like increased fuel consumption and decreased power. Excessive carbon buildup: Weakened spark plug firing capability results in incomplete combustion of the air-fuel mixture. This incomplete combustion produces a carbonaceous deposit called carbon buildup, and black smoke may also emerge from the vehicle's exhaust pipe.

13

1

Share

Why is the car wiper not spraying water?

Does Dongfeng Honda have the Accord?

Do you need to wait for a red light when making a U-turn?

What grade of gasoline is suitable for the CX-5?

What is the fuel consumption per 100 kilometers for the Tiguan L330?

Can Different Types of Brake Fluid Be Mixed?

What are the symptoms of aging ignition coils?

Which country produces the Middle East version of the Prado?

What is the fuel consumption of the Lincoln Nautilus 2.7T?

What is Huayu Auto?

What is the wheel size of Jetta?