···
Log in / Register

Why doesn't the car dashboard display speed in kilometers?

4 Answers
BenjaminRose
09/02/25 8:25am

There are many possible reasons why a car's dashboard does not display speed in kilometers: 1. Faulty wheel speed sensor/vehicle speed sensor: This issue can be diagnosed by using a decoder to read data streams, lifting the vehicle, and rotating the wheels to check for wheel signals. 2. Signal transmission problems: Issues such as open circuits or short circuits in the wiring. 3. Check the speedometer flexible core: Inspect whether the connection device between the transmission and the speedometer is broken. 4. Check the odometer gear on the transmission: Verify if the odometer gear on the transmission is malfunctioning.

Was this review help?
18
1
Share
JonathanFitz
09/15/25 3:33am

I've been driving for over a decade and have encountered issues with the dashboard speed display disappearing. This is usually due to a faulty speed sensor, such as when the sensor near the wheels gets dirty or damaged, preventing the signal from reaching the dashboard. Worn-out or short-circuited wiring can also cause unstable electrical currents. Another possibility is a blown fuse cutting off the power supply. I recommend first checking the fuse box in the engine compartment to see if the corresponding fuse is blown—sometimes a simple replacement can fix the issue. If that doesn't work, don't risk driving; not knowing your speed is dangerous as you might unknowingly exceed speed limits. Head to a professional repair shop immediately to fix the sensor or wiring. Address the problem promptly—safety comes first. Driving without a speed display is like walking blindfolded.

Was this review help?
20
5
Share
Expand All
StAdriel
10/29/25 4:13am

As a regular commuter driver, I panic when the dashboard doesn't display the speed in kilometers. Possible causes include sensor failure or poor wire connections, especially in older vehicles where wiring tends to loosen. A blown fuse is another common issue - simply replacing it often solves the problem. For modern cars with digital dashboards, software glitches may cause display errors; try restarting the vehicle as this can sometimes instantly restore functionality. Regardless, avoid speeding as it increases accident risks. Pull over to check fuses or go directly for repairs - don't let the issue linger and disrupt your journey.

Was this review help?
6
1
Share
Expand All
MiguelLynn
12/12/25 4:25am

From my car repair experience, when the car dashboard doesn't display speed, it's often due to a faulty wheel speed sensor or damaged wiring inside the instrument cluster. Loose wire connectors or blown fuses could also be the cause. For digital dashboards, software bugs may prevent speed updates. I recommend not ignoring this issue - use an OBD scanner to check error codes as soon as possible to identify the root cause. Attempting DIY repairs might backfire, so it's better to have a technician handle it. For safety, change lanes slowly and drive cautiously until the issue is fixed.

Was this review help?
7
3
Share
Expand All
More Forum Discussions

What are the differences between the Reiz 2.5v and Reiz 2.5s?

The differences between the Reiz 2.5v and Reiz 2.5s: 1. Different sunroof configurations: The Reiz 2.5v is equipped with an electronically controlled electric sunroof; the Reiz 2.5s does not have a sunroof. 2. Different seat adjustment methods: The Reiz 2.5v uses electronic switch electric adjustment; the Reiz 2.5s uses manual mechanical adjustment. 3. Different heating methods: The Reiz 2.5v is equipped with air conditioning heating and heating for the front seats; the Reiz 2.5s is equipped with air conditioning heating. The Reiz is the domestic name for the Japanese Toyota MARKx model. It is produced on the same production line as the Crown at Tianjin FAW Toyota Plant II, sharing the same chassis and equipped with the same six-speed automatic transmission as the Crown.
10
1
Share

Can Driving School Vehicles Drive on Highways?

Driving school vehicles can drive on highways. Here is an introduction to the types of vehicles that are not allowed on highways: Non-motorized vehicles: In urban roads, there are lanes for non-motorized vehicles, but on highways where speeds are higher, motor vehicles naturally cannot drive on them. First, the speed of non-motorized vehicles does not meet the requirements for highway driving. Second, the safety configurations of non-motorized vehicles are not up to standard. For safety reasons, such vehicles are prohibited from entering highways. Tractors: Tractors, wheeled special motor vehicles, articulated buses, full trailer trucks, and other motor vehicles with a design speed of less than 70 kilometers per hour are not allowed on highways. Once they illegally enter highways, they become safety hazards, both for themselves and other drivers.
8
3
Share

What Causes the Squeaking Sound When Pressing the Clutch Pedal?

The squeaking sound when pressing the clutch pedal is caused by: 1. Excessive wear of the clutch release bearing; 2. Faulty diaphragm spring; 3. Poor lubrication; 4. Loose or damaged clutch; 5. Broken or excessively worn clutch release levers; 6. Broken adjustment bolts of the release levers. Solutions for the squeaking sound when pressing the clutch: 1. Apply grease to the release bearing; 2. Replace the clutch pedal assembly; 3. Check the working condition of the clutch release levers; 4. Inspect if the clutch springs are damaged. Types of clutches: Electromagnetic clutch, magnetic particle clutch, friction clutch, and hydraulic clutch.
20
4
Share

Is an Exam Required for Upgrading from C1 to B2 License?

An exam is required. If passed, the vehicle management office will issue the new-level driver's license within 7 working days. Below are the detailed conditions for upgrading from C1 to B2: Must have held a motor vehicle driver's license for at least one year; No record of accumulating 12 penalty points in the current scoring cycle and the most recent scoring cycle before application; No history of causing a fatal traffic accident while bearing equal or greater responsibility; No history of drunk driving; Driver's license has not been revoked or rescinded within the past ten years; Age must be between 20 and 60 years. C1 is a code for a type of permitted driving vehicle under the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123). C1 permits driving small and micro passenger vehicles, light and micro cargo vehicles, and light and micro special-purpose vehicles, and also allows driving vehicles permitted under C2, C3, and C4. B2 license permits driving heavy and medium-duty cargo vehicles or large, heavy, and medium-duty special-purpose vehicles. Heavy and medium-duty cargo vehicles are mainly trucks, such as the large trucks commonly seen on roads carrying construction waste, which fall under heavy trucks. Large, heavy, and medium-duty special-purpose vehicles refer to vehicles equipped with specialized devices or tools, such as sprinkler trucks, concrete mixer trucks, and fire trucks. Article 14 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" states that first-time applicants for a motor vehicle driver's license can apply for permits to drive city buses, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, small automatic transmission passenger vehicles for the disabled, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. For those who already hold a motor vehicle driver's license and wish to apply for additional permitted vehicle types, they can apply for large passenger vehicles, tractor trucks, city buses, medium passenger vehicles, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Article 15 states that those who already hold a motor vehicle driver's license and wish to apply for additional permitted vehicle types must have no record of accumulating 12 penalty points in the current scoring cycle and the most recent scoring cycle before application. This applies to applications for medium passenger vehicles, tractor trucks, and large passenger vehicles. The B2 driver's license exam consists of four subjects: Subject 1 covers road traffic laws and regulations, including road traffic rules, traffic violations, traffic signals, and accident handling. Subject 2 involves operational tests for large passenger vehicles, city buses, and tractor trucks, including pole tests, side parking, hill starts, and single-plank bridge navigation. Subject 3 includes driving preparation, starting, straight-line driving, lane changes, and gear shifting operations for large passenger vehicles, city buses, tractor trucks, and medium passenger vehicles. Subject 4 covers safe and civilized driving requirements, safe driving knowledge for extreme weather and complex road conditions, and accident handling procedures.
8
3
Share

What is the correct way to use a vehicle?

The correct way to use a vehicle is: 1. Daily maintenance: Check engine oil, fuel, gear oil, coolant, front and rear axles of tires, instruments, and various lights; 2. Do not let the engine work under overload conditions: Do not immediately operate at high speed after starting the vehicle. Let it idle for 5 to 10 minutes, wait until the water temperature rises to 45-55 degrees Celsius before allowing the engine to work, and only operate at high speed when the temperature rises above 80 degrees Celsius. Vehicle maintenance items: 1. Replace engine oil, oil filter, air filter, and fuel filter; 2. Check the body and tires; 3. Inspect the braking system; 4. Check for damage to the chassis; 5. Check the level of various fluids.
5
1
Share

What are the reasons for the engine not turning?

The reasons for the engine not turning are: 1. The battery is dead or has weak power; 2. Loose or fallen wires causing switch or solenoid switch failure; 3. Worn brushes, misaligned brush surfaces, weak springs, or poor commutator contact; 4. Short circuits or open circuits in the field coil or armature coil; 5. Dirty commutator or protruding segments causing poor brush-to-commutator contact. Methods to check why the engine is not turning: 1. Inspect the starting circuit, fuses, relays, battery and connections, and the starter switch; 2. Check if the gearshift lever is in the P or N position; 3. Check the battery voltage and connections; 4. Inspect the operation of the starter's pull-in coil and hold-in coil; 5. Check if the engine's crankshaft is seized.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.