···
Log in / Register

Why Does Water Enter Car Doors When It Rains?

6Answers
MacIsabella
09/06/2025, 01:12:54 AM

There are typically two reasons for this issue: water entering while the vehicle is in motion or while it is parked. There are gaps on the car body and doors, making it inevitable for rainwater to seep into the doors during rainy weather, leading to water ingress. The reasons for water entering the car cabin during rain are as follows: 1. Rainwater entering through the windshield: It might be due to the rear windshield not being properly closed, allowing rainwater to enter during rainy weather, resulting in water under the seats. Ensure all windows are closed to prevent water ingress. 2. Poor door sealing: If the rubber seals are not installed correctly, repeated closing and compression of the doors can cause the seals on both sides to deform, reducing the car's sealing effectiveness. In severe cases, this can lead to water pouring into the car during rain. 3. Sunroof leakage: Pay attention to the waterproofing of the sunroof. The sunroof is sealed with rubber gaskets, so it's important to keep these seals free of dust during use. Especially in winter or after long trips, regularly clean them with a duster to maintain their effectiveness.

Was this review help?
117
Share
MacChloe
09/18/2025, 01:04:20 AM

Last week when it rained, I found water inside my car door and was shocked, thinking the car was broken. I asked an experienced driver friend, and he said the most common issue is aging rubber seals around the door. Hot or cold weather can make them harden and crack, allowing rainwater to seep through the gaps. He told me to check the drainage holes at the bottom of the door—if those small holes are clogged with mud, water can accumulate inside the door and eventually leak into the car. I checked myself and noticed several gaps in the seals that clearly need replacement. He recommended buying new seals from an auto repair shop and parking in the shade more often to extend their lifespan. If too much water gets in, the electrical circuits inside the door could short-circuit, causing even bigger problems.

Was this review help?
19
Share
Expand All
Declan
11/01/2025, 01:29:38 AM

Over the years of car repair, dealing with water leakage in car doors is quite common. In most cases, it's due to worn door seals or clogged drainage holes. The seals lose elasticity over time, creating gaps that allow rainwater to seep in along the door edges. The drainage holes at the bottom of the door often get blocked by dirt and need cleaning. I recommend car owners first check if the seals have softened or deformed - replacing them is straightforward. For drainage holes, simply use a thin wire to clear them. As a preventive measure, inspect them once before each rainy season to avoid water accumulation inside the door, which could corrode metal or electronic components, ensuring safe driving.

Was this review help?
12
Share
Expand All
VanCalvin
12/15/2025, 12:37:40 AM

With over 30 years of driving experience, I've encountered water leakage into the car doors several times during rainy days, mainly due to aging sealing strips or door deformation preventing a tight closure. I've learned not to panic when this happens. First, check if the windows are properly closed, then clean the drainage holes at the bottom of the door. Installing rain guards on the doors can prevent water from getting in, and replacing old seals promptly is crucial. Don't ignore these minor issues, as prolonged neglect can lead to door rust.

Was this review help?
12
Share
Expand All
ArthurLynn
02/04/2026, 01:32:16 AM

As a hands-on car owner, I fixed the water leakage in my car door myself. First, I checked if the door seal was cracked or damaged. Small cracks can be repaired with silicone grease lubrication, but major issues require replacing the seal. Then, I located and cleared the clogged drainage holes at the bottom of the door using a hook. The whole process took half an hour, and after spending a few dozen yuan on a new seal, there were no leaks during rain. I recommend DIY with simple tools, and the key is regular maintenance to keep the car door dry.

Was this review help?
4
Share
Expand All
Pierce
04/29/2026, 05:49:51 PM

On a rainy day, I noticed water seeping into the car door, worrying about excessive moisture causing mold and damage to the door's electronics. I checked that the windows were tightly closed, but the issue turned out to be the aging and hardened weatherstripping allowing rainwater leakage. After researching online, I learned it's important to ensure the drainage holes at the bottom of the door are clear. Before the rainy season, I plan to visit an auto repair shop to inspect the weatherstripping and clean the drainage holes to ensure safety and prevent water from affecting visibility or corroding components.

Was this review help?
5
Share
Expand All
More Q&A

What causes the Ford Focus to jerk and lack power during acceleration?

The reasons for the Ford Focus experiencing jerking and lack of power during acceleration include issues with the vehicle's systems, severe carbon buildup, and poor fuel quality. Below is a detailed analysis of the specific causes: 1. Large spark plug gap: The main components of a car engine's ignition system include the ignition coil and spark plugs. Spark plugs are wearable parts that require regular replacement. As the vehicle's usage time increases, the electrode gap of the spark plugs in the engine will widen. If the electrode gap becomes too large, it can lead to weakened engine power, increased fuel consumption, and poorer operational balance. 2. Severe carbon buildup: Carbon buildup can cause a car to accelerate weakly for three main reasons. The first is the accumulation of carbon deposits on components such as the valves, idle air control valve, intake manifold, combustion chamber, and spark plugs. Vehicles frequently driven in congested areas, where acceleration and deceleration occur repeatedly, are prone to developing a feeling of weakness during driving. 3. Poor fuel quality: Using low-quality gasoline can affect the fuel filter and fuel lines, leading to poor fuel supply and resulting in weak acceleration. It can also shorten the lifespan of the exhaust system's three-way catalytic converter. If the three-way catalytic converter becomes clogged, it will directly impact the vehicle's acceleration performance, increase fuel consumption, and cause the phenomenon of weak acceleration.
119
Share

What are the differences between the X1 and the Enclave S?

The differences between the X1 and the Enclave S are as follows: 1. Different engines: The X1 is equipped with a 1.5T L3 engine, while the Enclave S has a 2.0T L4 engine. 2. Different vehicle types: The X1 is a compact SUV, whereas the Enclave S is a midsize SUV. 3. Different transmissions: The X1 uses a 7-speed dual-clutch transmission, while the Enclave S features a 9-speed automatic transmission. Additional information about transmissions: 1. Introduction: A transmission is a device that changes the speed ratio and direction of motion. It is used to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several gear pairs. 2. Function: While driving, to adapt to different conditions, the vehicle's driving force and speed need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the need for a transmission.
105
Share

How to Open the Focus Trunk from Inside?

Methods to open the Focus trunk from inside: 1. Remote unlocking: Press the trunk unlock button on the remote twice in succession, the trunk will unlock and open but will not pop up, requiring manual lifting; 2. There is a trunk opening button in the multifunction key area on the left side of the steering wheel inside the car. The Focus is a compact car under Changan Ford. Taking the Focus 2021 Sedan 1.5L Manual Fengyue as an example, the body adopts a 4-door 5-seat structure with a fuel tank capacity of 53 liters. In terms of power, the Focus 2021 Sedan 1.5L Manual Fengyue is equipped with a 1.5L inline three-cylinder naturally aspirated engine, with a maximum power of 90kW and a maximum torque of 153Nm, matched with a 6-speed manual transmission.
116
Share

What formats does the Cadillac USB drive support?

Cadillac USB drives support formats such as mp3, wma, aac, wav, and flac. During the music transfer process, the CIC host converts the original mp3 and other format files into br5 format files and stores them on the host hard drive. The br5 format files cannot be recognized by ordinary computer players, which is designed to prevent user privacy leakage. The XTS is a large and medium-sized sedan under SAIC General Motors Cadillac. Taking the Cadillac XTS 2018 28T Luxury model as an example, its body dimensions are 5103mm in length, 1852mm in width, and 1502mm in height, with a wheelbase of 2837mm. The body adopts a 4-door, 5-seat sedan structure with a fuel tank capacity of 70 liters.
108
Share

Are the Mercedes-Benz E300 and E300L the same?

No, they are not. Here are their differences: 1. Different exterior: The E300 is the standard wheelbase version, while the E300L is the long wheelbase version. The 'L' stands for 'Long,' meaning the E300L has a longer body and wheelbase than the E300, which directly results in more rear seat space. The new Mercedes-Benz E-Class Long Wheelbase version remains unchanged from the imported E-Class, with only some adjustments made to the body length, width, and wheelbase for the Chinese market. The domestically produced Mercedes-Benz E-Class Long Wheelbase version has a body length of 5012mm, a wheelbase extended by 140mm to 3014mm, and a body width slightly increased by 1mm. 2. Different production origins: The E300L is domestically produced, while the E300 is fully imported. 3. Different interiors: The E300L features a dark gray interior that appears more youthful, paired with brown seats, giving it a very high-end feel. The focal point on the center console is the large GPS navigation screen, with the middle section housing the audio control buttons and the lower part containing the air conditioning control buttons.
113
Share

How to Reset the Oil Light on a Bora?

The method to reset the oil light on a Bora is: 1. Turn off the ignition switch and hold down the set button; 2. Turn on the ignition switch and press the button on the left side of the dashboard. The Bora is a compact car under FAW-Volkswagen. Taking the 2021 Comfort Smart Edition as an example, its body dimensions are: length 4663mm, width 1815mm, height 1462mm, with a wheelbase of 2688mm and a fuel tank capacity of 50l. The 2021 Comfort Smart Edition is equipped with a 1.2T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum power speed of 5000rpm.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.