···
Log in / Register

Why does the Ford Mondeo's B-pillar make abnormal noises?

3 Answers
Tim
09/01/25 8:20am
The abnormal noises from the Ford Mondeo's B-pillar are caused by issues with the seat belt adjuster buckle and poor sealing of the doors or windows. Below are several common scenarios of car noises and their solutions: 1. Body noises: This issue usually occurs due to insufficient body rigidity, causing deformation while driving, resulting in friction or vibration between doors and frames, or loose welds leading to metal sheet friction. Applying adhesive strips on doors/windows or placing rubber pads at friction points may temporarily reduce or eliminate the noise, but these are not permanent fixes. Loose body components can also cause noises, which can often be resolved by tightening screws. 2. Engine compartment noises: There are multiple possible causes here. A high-pitched belt squeal typically indicates belt slippage. Metallic scraping sounds during engine operation often suggest damaged bearings in the generator, water pump, or power steering pump. Hissing sounds may point to exhaust system blockages or leaking/broken vacuum tubes. Note: For internal engine noises, professional repair is strongly recommended as most owners cannot fix these issues themselves. 3. Transmission noises: If a 'rustling' sound from the transmission disappears when depressing the clutch, this indicates transmission issues potentially caused by worn bearings/gears or bearing pitting.
Was this review help?
7
2
Share
VanWeston
09/14/25 3:57am
I experienced a squeaking noise from the B-pillar while driving my Mondeo, which was really annoying, especially on bumpy roads. Initially, I thought it was a minor issue and ignored it, but the noise grew louder and started affecting my focus while driving. Upon inspection, I found that the door lock was loose or the seatbelt buckle wasn’t secured properly, causing friction and noise over bumps. Some owners have reported that aging or cracked interior panel clips can also lead to such noises. I recommend first checking the components around the door frame by shaking them manually to locate the source of the sound. If it’s hard to fix, take it to a repair shop to tighten screws or replace the clips. Long-term neglect could potentially damage the safety structure. While the Mondeo is generally reliable, minor issues like this are common, and addressing them early can save you a lot of hassle.
Was this review help?
18
1
Share
Expand All
OAndres
10/28/25 4:41am
There are quite a few reasons for the B-pillar rattling in a Mondeo. Loose body welding points can cause metal friction noises when driving over bumps. Alternatively, poorly secured interior trim panels or broken clips may produce creaking sounds. Worn seatbelt retractor mechanisms are also a common issue, leading to rattling noises. With decades of driving experience, I can say such noises usually aren't major faults, but they do affect driving comfort. Start troubleshooting by checking fasteners - like whether door lock screws are loose. In older vehicles, material fatigue makes this more likely to occur. From a safety perspective, rattling points are more prone to deformation during collisions, so I recommend getting a professional inspection promptly. Addressing it early makes the cabin much quieter.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

What to Do If the Vehicle Annual Inspection Sticker Is Lost?

Here are the steps to handle the loss of a vehicle annual inspection sticker: If the annual inspection sticker is lost, it can be reissued. Bring the original and a copy of the vehicle registration certificate and the owner's ID card to the local vehicle management office or inspection station in the city where the vehicle is registered. You will need to fill out a reissuance application form explaining the reason for the reissuance. Once approved, a new annual inspection sticker will be printed on-site. Note: In addition to the annual inspection compliance sticker, the upper right corner of the vehicle's front windshield should also display the insurance sticker and the environmental protection sticker to legally drive on the road. According to the "Road Traffic Safety Law," all vehicles on the road must display the current year's inspection sticker in a visible position on the upper right corner of the front windshield. Vehicles that fail to display the annual inspection compliance sticker as required will be penalized with a 1-point deduction and a fine of 50 yuan.
15
4
Share

How to adjust the fog lights on the Mazda3 Axela?

Mazda3 Axela fog light switch is located on the lighting switch assembly on the left side of the steering wheel, and the fog lights can be turned on or off by rotating the knob. Here is more information about fog lights: 1. The function of fog lights is to make other vehicles see your car in foggy or rainy weather when visibility is greatly affected by the weather. Therefore, the light source of fog lights needs to have strong penetration. 2. Most vehicles use halogen fog lights, and LED fog lights are more advanced than halogen fog lights. Extended content: The following is the classification of car lights: 1. Headlights. Combined headlights are located at the front of the car, mainly serving the purpose of lighting and signaling. The light emitted by the headlights can illuminate the road conditions in front of the car body, allowing the driver to drive safely at night. 2. Combined taillights. Combined taillights are located at the rear of the car, mainly serving the purpose of lighting and signaling. 3. Turn signals. Used to indicate to other road users that the vehicle is turning left or right. 4. License plate lights. License plate lights mainly illuminate the license plate, allowing people to identify the vehicle license plate at night.
19
2
Share

What is the Difference Between Power and Horsepower in Cars?

The differences between car power and horsepower mainly include the following points: 1. Different meanings. (1) Engine power refers to how fast the engine does work. The work done by the engine per unit time is called the engine's power. Corresponding to indicated work and effective work, it is called indicated power and effective power (output power), respectively. The difference between these two is called mechanical loss power. (2) Horsepower was proposed by James Watt and is a commonly used unit of power in engineering. It generally refers to metric horsepower rather than imperial horsepower. 2. Different physical meanings. (1) Power: A physical quantity that represents how fast an object does work. (2) Horsepower: It is defined that 1 metric horsepower is the work done to lift 75 kilograms-force·meters in 1 second. 3. Conversion relationships. (1) 1 kilowatt (kW) = 1.3410221 imperial horsepower (hp). (2) 1 kilowatt (kW) = 1.3596216 metric horsepower (ps). (3) 1 imperial horsepower (hp) = 1.0138697 metric horsepower (ps). 4. Different usage habits. Europe and America are accustomed to using horsepower as the unit, while China is accustomed to using metric units, which is kilowatts.
16
0
Share

How much transmission oil should be added for Mercedes-Benz C200L?

For the Mercedes-Benz C200L, the transmission oil requires 7L for manual replacement and 10L for machine replacement. The replacement interval is 60,000 kilometers. The methods for replacing the transmission oil in the Mercedes-Benz C200L are as follows: 1. Gravity replacement. Use tools to loosen the nut, and the transmission oil will automatically flow out under gravity. However, it cannot be completely drained. Not all transmission oil can be discharged due to mechanical structures with dead corners such as depressions and pits. 2. Circulation machine replacement. Store the new transmission oil inside the circulation machine, connect the transmission and the circulation machine through pipeline interfaces, and the new oil will push out the old oil under the action of the circulation machine. This method cleans the oil circuit more thoroughly. The more new transmission oil used in the circulation machine cleaning, the cleaner the old oil will be discharged. For circulation machine replacement, approximately 10-15L of oil is used each time. This method takes about 1 hour. 3. Oil pan removal for oil replacement. This method is a root cleaning method and can also clean the oil filter. It is better to use the circulation oil replacement method for changing transmission oil, as it is cleaner. Gravity oil drainage can only replace part of the oil, so circulation oil replacement is more beneficial for the transmission.
12
3
Share

How to Replace the Complete Car Lock for BYD L3?

Here is the method for replacing the complete car lock for BYD L3: 1. Clear the original key code. 2. Register the new key code. 3. Perform remote matching to complete the replacement. Below are daily precautions for car key usage: 1. Every time you exit the car, even if it's just for a few minutes, turn off the engine, remove the key, and lock the car to prevent giving thieves an opportunity. 2. Car keys should be kept waterproof, protected from severe vibrations, and kept away from magnetic interference. If the key is damaged, it also needs to be replaced. 3. Keep the spare key and the main key separate. Do not lock the spare key inside the car, especially for vehicles with one-button start or engine immobilizers, as the spare key can fully start the engine. 4. If the key is lost and cannot be matched in time, do not leave valuables in the car. Additionally, consult your insurance company about the details of compensation for vehicle theft to ensure you have the necessary evidence in case the vehicle is stolen.
1
1
Share

Is it illegal to use high beams on the highway?

Normally, using high beams on the highway is not illegal. When driving on highways without streetlights, high beams can be used to expand the driver's field of vision and avoid potential hazards. However, when encountering oncoming vehicles, it is important to switch to low beams, as high beams can dazzle the driver of the vehicle ahead, compromising road safety. Below are the correct methods for using high beams: 1. When following another vehicle, to avoid affecting the driver ahead, turn off the high beams and maintain a sufficient distance; 2. When preparing to overtake, turn off the high beams and use the overtaking signal lights to alert the vehicle ahead. After completing the overtaking maneuver, you can switch back to the original lane and resume using high beams; 3. When entering a toll station or service area, reduce speed and turn off the high beams; 4. When passing through ramp intersections, turn off the high beams, and avoid using high beams during continuous turns. Please drive at a reduced speed.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.