Why does the driver's license still show as pending on 12123 after the annual inspection?

2 Answers
McJake
07/24/25 6:09pm
After the annual inspection of the driver's license, it still shows as pending on 12123 because the staff have not yet entered the inspection information into the online system. As long as the inspection procedures are correct, it will not affect the use of the driver's license. Below are the details regarding the driver's license annual inspection: 1. Renewal time: According to the Road Traffic Safety Law implemented on May 1, the minimum validity period of a driver's license is 6 years, and the license does not require annual inspection during its validity period. However, the renewal should be processed at the local traffic police branch within 90 days before the expiration date. 2. Medical examination: Drivers aged 60 and above, regardless of the type of license they hold, must collect the "Motor Vehicle Driver's License Application Form" from the Vehicle Management Section of their local traffic police branch during the original annual inspection period. After undergoing a medical examination at a designated hospital, they must submit the form back to the Vehicle Management Section for computer confirmation.
Was this review help?
20
1
Share
SanMaci
08/11/25 10:04am
I've been driving for over a decade, and after my driver's license annual inspection, the 12123 app still shows it as pending. This situation is often due to data synchronization delays. The traffic system backend processing and updates take time, especially during peak hours when it's particularly slow. Officially, it can take up to 48 hours. Poor network signals can also affect the app's data refresh. I recommend not to worry and check again after a day; or try restarting the app and checking your network connection. If there's no change after two days, you can call the 12328 traffic service hotline or visit the local vehicle management office to verify and ensure your driver's license information is correct. For safety, carry the paper proof of your annual inspection to avoid any hassle during random checks. Keep an eye on app updates regularly—the data will eventually sync properly, it just takes a little while.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What is the fuel consumption of the A4?

The fuel consumption of the Audi A4 is 6.2-7.8L/100km. Here are additional details: Vehicle positioning: The Audi A4 is a B-segment model manufactured by FAW-Volkswagen and launched in April 2003. As the first model to introduce the long-wheelbase and turbocharging concepts, the A4L has maintained strong sales from the B5 to the B8 generations. The new A4 has abandoned the teardrop headlight design, added quattro all-wheel drive, and features a more stylish and sporty exterior with outstanding power and handling. Powertrain: The interior craftsmanship is refined, equipped with advanced technology, and offers ample space, making it highly practical among B-segment models. The FAW Audi A4 is available in three engine displacements: 1.8T, 2.4, and 3.0. The 1.8T comes in four variants: manual base, automatic base, comfort, and technology-leading. The 2.4 displacement has three variants: comfort, comfort sport, and comfort premium. The 3.0 displacement is available in only one variant, equipped with the quattro all-wheel-drive system.
11
2
Share

What Causes the Camry's Central Control Screen Not to Light Up?

The central control screen not lighting up is usually caused by poor line contact, aging of the power signal line, etc. You can try replacing it with a new one. If the black screen issue is resolved, it indeed indicates a problem with the power signal line. The specific reasons for the central control screen not lighting up are as follows: Poor line contact: It is necessary to promptly check whether there is any loose connection in the lines. If there is, it will naturally lead to a black screen of the central control screen. In this case, simply reconnecting the loose parts properly will solve the issue. Aging of the power signal line: Because the power signal line has aged, you can try replacing it with a new one. If the black screen issue is resolved, it indeed indicates a problem with the power signal line. Excessive screen usage time: If after checking for loose connections and aging signal lines, the central control screen still does not light up, it is likely due to excessive usage time of the screen, leading to a failure in the power supply module. This not only causes lag but also severe cases result in a black screen. Damage to the central information display: This could be due to power supply issues, third-party software incompatibility with the system, or the software version being too outdated, causing system failure and inability to display normally, or screen damage. If it's not a simple issue, a vehicle inspection is needed, connecting a diagnostic computer for electrical fault troubleshooting. If necessary, the vehicle display screen may need to be replaced.
15
4
Share

What is the ground clearance of the Elantra in centimeters?

The ground clearance of the Elantra is approximately 150mm, which is a common height for most sedans. Below is some relevant information: Introduction: The Elantra is a typical Korean car. As the best-selling overseas model of Hyundai, it has gone through six generations. The Beijing Hyundai Elantra is slightly modified based on its sixth-generation model to suit Chinese road conditions and climate, and has been well-received for its rich features and relatively high cost performance. Interior: The Elantra's interior features clean lines, with a fresh beige color scheme. The center console and door armrests are accented with matte metallic trim, giving it a stylish look. The plastic components on the dashboard are of decent quality, avoiding a particularly cheap feel.
17
1
Share

What causes unstable idling, shaking, and frequent stalling when the engine is warm?

The reasons for unstable idling, shaking, and stalling are as follows: 1. Severe engine carbon deposits. The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. 2. Ignition system issues. Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or faulty spark plug firing can also lead to such symptoms. 3. Unstable fuel pressure. If you have already cleaned the engine carbon deposits, cleaned the throttle body, replaced the gaskets and spark plugs, but still notice shaking during idling, it is recommended to visit a 4S shop to check the fuel supply pressure and the intake pressure sensor. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can cause the car to shake. 4. Aging engine components. Car shaking can also be related to the aging of engine mounts (also known as engine mounts). Engine mounts are essentially the shock absorption system of the engine, responsible for absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can be transmitted to the steering wheel and the interior of the car, causing shaking during idling.
3
2
Share

Where is the computer connector located in a 2006 Peugeot 307?

The diagnostic connector for the 2006 Peugeot 307 is located behind the panel on the lower left side of the driver's dashboard. This panel is labeled 'OBD,' and you simply need to pull it out to access the vehicle's OBD interface. There is a computer connector in the car called the OBD interface. OBD stands for On-Board Diagnostics. This system is primarily used to monitor the engine's operating status and the working condition of the exhaust treatment system in real-time. If the system detects abnormal data, it indicates that the system is not functioning properly. The OBD will store the fault code and illuminate the malfunction indicator lamp. Mechanics can then read the fault code using diagnostic tools to analyze the cause of the issue. Most vehicles on the market today use the OBD-II system, with a standardized 16-pin diagnostic socket that is universal and capable of data transmission and analysis. This allows auto repair shops to use a single computer to diagnose multiple vehicle brands. Not only can diagnostic computers read vehicle operating data through the OBD interface, but various third-party OBD-compatible products have also been developed. From the earliest OBD diagnostic cables used to connect to a computer for data reading, to today's OBD GPS trackers, OBD tire pressure monitors, OBD heads-up displays, and OBD Bluetooth diagnostic tools—these modules simply plug into the car's OBD interface to expand various functionalities. It's incredibly straightforward: just plug it in, and no wiring modifications are required.
10
3
Share

Does the Q3 have a particulate filter?

Audi Q3 is equipped with a particulate filter, which is standard across all models of the Audi Q3 series. Therefore, the Audi Q3 does have a particulate filter. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, designed to capture particulate emissions before they enter the atmosphere. It can reduce soot emissions from diesel engines by more than 90%, and the captured particulate matter is subsequently burned off during vehicle operation. How the particulate filter works: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate trap through a dedicated pipe. The densely arranged bag filters inside capture the carbon particles on a filter made of metal fiber felt. When the accumulation of particles reaches a certain level, the burner at the end automatically ignites, burning off the captured carbon particles and converting them into harmless carbon dioxide. To check if your Audi Q3 has a particulate filter, you can use the following three methods: Refer to the and to see if the particulate filter function is mentioned. Additionally, carefully review the fault codes in the manual to check for any 'particulate filter' warning light indicators. Check the label on the oil cap. If the oil cap clearly indicates the use of 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Look at the exhaust pipe behind the three-way catalytic converter to see if there is an additional cylindrical section. If present, that is the particulate filter.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.