···
Log in / Register

What is the minimum vision requirement for a C1 driver's license?

6Answers
VonSimon
07/28/2025, 07:16:15 PM

The minimum vision requirement is above 4.9. The vision test requirements for the physical condition certificate of a motor vehicle driver's license can vary. It can be naked eye vision, corrected vision, or vision with matching glasses. As long as normal vision can be achieved, the vision test can be passed. Below is an introduction to the C1 driver's license: 1. C1 Driver's License: The C1 driver's license generally refers to the C1 driver's license. The C1 driver's license is one of the codes for motor vehicle driver's licenses. The permitted driving level of a C1 driver's license includes (all models of C2, C3, C4) small and micro passenger cars, light and micro cargo trucks, and light, small, and micro special operation vehicles. The examination subjects include four items: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. 2. Examination Content: The examination subjects include four items: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge.

Was this review help?
104
Share
LeChristopher
08/11/2025, 10:35:30 PM

I remember when I took the C1 driver's license test over twenty years ago, the vision requirements were quite strict. You had to score at least 4.9 on the standard eye chart—if your naked eyesight wasn't good enough, you had to correct it with glasses. For those with monocular vision impairment, the other eye needed a sufficient field of vision, over 150 degrees, to pass. During the physical exam, I was really nervous, afraid I might misread the line of letters the doctor pointed to. Poor vision while driving can easily lead to misjudging distances and road signs, making nighttime highway driving especially dangerous. I think these standards are quite reasonable because safety comes first. We should take care of our eyes daily—reduce screen time and rest more. Meeting the vision standard isn’t just about passing the test; it’s about ensuring safety for ourselves and others. If you fail the physical, don’t panic—just get glasses and try again. There’s still a long driving journey ahead.

Was this review help?
19
Share
Expand All
OEmilia
10/01/2025, 01:25:52 AM

I'm preparing to take the C1 driver's license test and am particularly curious about the vision requirements. I heard the minimum is 4.9, and both naked eyesight or wearing glasses count as passing, but you must meet the standard on the day of the physical exam. My own vision is 4.8, which makes me a bit worried. A friend reminded me not to cross the red line; if one eye doesn't meet the standard, the field of vision must be at least 150 degrees to avoid major issues. New drivers with poor vision tend to get fatigued easily while driving, and not being able to see traffic lights clearly is a disaster. The physical exam process is simple—the doctor checks with a standard chart, and it's done in minutes. If you fail, it's recommended to get glasses immediately. Only with qualified vision can you drive with peace of mind, so don’t underestimate this small detail. Safe driving starts with your eyes—is eating more carrots to improve eyesight reliable?

Was this review help?
15
Share
Expand All
DiStephanie
11/14/2025, 02:13:31 AM

The vision standard for a C1 driver's license is clearly defined, requiring a minimum of 4.9 in naked-eye or corrected vision. From my experience in the driving test community, many cases show that medical examinations strictly follow regulations; insufficient vision can affect judgment of road conditions such as vehicle distance or pedestrians, especially in rainy or foggy weather when visibility is poor. It's perfectly fine to wear glasses during the test if your vision is inadequate, but you must always wear them while driving, otherwise it's a violation. Safety comes first—it's a shame to cause accidents due to poor vision. It's advisable to self-check your vision with an eye chart or visit an ophthalmologist before the test to confirm compliance, making it easier to obtain the license if you meet the standard.

Was this review help?
14
Share
Expand All
ArthurDella
01/04/2026, 09:02:39 PM

Vision significantly impacts driving. The C1 driver's license requires a minimum visual acuity of 4.9 on the standard chart, with glasses allowed for correction if unaided vision is insufficient. This standard ensures you can quickly identify hazards like suddenly appearing pedestrians. For monocular vision impairment, a visual field exceeding 150 degrees is required for safety. From personal experience, don't neglect daily eye care—practice regular distance viewing or wear blue-light-blocking glasses. Adequate vision makes for steadier driving. Driving demands high concentration, and meeting vision standards can halve accident risks.

Was this review help?
20
Share
Expand All
LaOlivia
04/01/2026, 03:57:29 AM

The minimum vision requirement for a C1 driver's license is 4.9, which can be met with either naked eyesight or corrected vision through glasses. After researching driving regulations, I found that the eye chart test during the medical exam is crucial. If you don't meet the standard initially, don't worry—getting a pair of glasses will usually help you pass. For monocular vision, a minimum visual field of 150 degrees is required for accommodation. Poor driving vision poses many risks, such as misjudging curves or braking timing, and increases the likelihood of skidding accidents in rainy conditions. New drivers should be extra cautious—ensure stable vision before the medical exam to avoid failing and wasting effort. Safety is no trivial matter; good vision is a fundamental safeguard.

Was this review help?
6
Share
Expand All
More Q&A

How big is the trunk of the Leiling?

The trunk dimensions of the Leiling are 540mm in length, 1000mm in width, and 695mm in height. Below is an introduction based on the 2021 Leiling model: 1. The Leiling is a compact car equipped with a 1.2T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 116PS, a maximum torque of 185Nm, and a maximum power of 85kW. It is paired with a 10-speed continuously variable transmission. 2. The 2021 Leiling has a body size of 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm, a minimum ground clearance of 105mm, and a curb weight of 1350kg.
117
Share

How Often Should the Outlander Be Serviced?

The Mitsubishi Outlander typically requires its first service at 5,000KM, the second at 15,000KM, and the third at 25,000KM. Subsequent services should follow the maintenance manual's guidelines. Vehicle maintenance includes the following items: 1. Primary vehicle maintenance tasks: After completing primary maintenance, the vehicle should be clean, connections secure, filters unobstructed, and free from oil, water, air, or electrical leaks. 2. Lubrication tasks for primary vehicle maintenance: Check the oil levels in the generator, transmission, rear axle, and steering gear, and add lubricating oil as required. Ensure all lubrication points are equipped and functional. 3. Inspection and tightening tasks for primary vehicle maintenance: Check the steering gear, tie rods, drag links, and steering arm connections for secure fastening.
117
Share

Will the electric rearview mirror break if manually adjusted?

Manually adjusting the electric rearview mirror will not break it. The electric rearview mirror is computer-controlled and automatically folds when the car is locked. However, frequent manual adjustments over time may affect the normal operation of the rearview mirror. The adjustment method for the rearview mirror is: 1. Press the circular button for the rearview mirror located on the door. 2. Adjust the corresponding rearview mirror up, down, left, or right as needed. The functions of the rearview mirrors are: 1. Interior rearview mirror: A mirror that allows the driver to confirm the rear situation while looking forward during driving. 2. Exterior rearview mirror: Installed on the car door, it enables the driver to see vehicles behind. 3. Underview mirror: Allows the driver to see areas outside the front and rear wheels beneath the car body through the mirror directly in front of the driver's seat.
107
Share

How to Drive an Automatic Transmission Car in Traffic Jams on Uphill Roads?

When encountering a traffic jam on an uphill road, it is important to prevent the car from rolling back and maintain braking. For an automatic transmission car, the gear should be placed in the P (Park) position, and the handbrake should be engaged. Some automatic transmission models have an O/D (Overdrive) button, which functions as follows: 1. When driving downhill, pressing the O/D button forces the car to stay in a lower gear without upshifting. This allows the use of engine braking and avoids frequent use of the brake pedal, enhancing safety during downhill driving. 2. In stop-and-go traffic, the car may frequently shift between 1st and 2nd gears, increasing fuel consumption and wearing out the brake pads. Pressing the O/D button can mitigate these issues, prolonging the car's lifespan. 3. When overtaking, if pressing the accelerator does not provide sufficient acceleration, pressing the O/D button increases the vehicle's torque, raising the engine speed for easier overtaking.
116
Share

Is Automotive Urea Toxic?

Automotive urea itself is non-toxic. However, during the production of such plastic containers, certain processing or modifying additives are used, such as fillers, stabilizers, or pigments, which contain harmful substances. Introduction to Automotive Urea: Automotive urea is a liquid used in SCR (Selective Catalytic Reduction) technology to reduce nitrogen oxide pollutants in diesel vehicle exhaust. Its composition consists of 32.5% high-purity urea and 67.5% deionized water. Environmental Standards: Environmental protection agencies worldwide have proposed further reductions in nitrogen oxide emissions from diesel engines. Domestically, it is commonly referred to as the Euro IV standard. Engine manufacturers have begun using SCR technology (Selective Catalytic Reduction Technology) to meet the requirements of environmental agencies. Diesel exhaust fluid (commonly known as automotive urea, vehicle urea, or automotive environmental urea in China) is a consumable essential for SCR technology.
104
Share

When will China VI be implemented?

China VI is divided into two standards, each with its own implementation time, as follows: 1. China VI a. Starting from July 1, 2020, light-duty vehicles will be required to comply with the China VI a emission standard. 2. China VI b. Starting from July 1, 2023, light-duty vehicles will be required to comply with the China VI b emission standard. However, many provinces and cities have implemented it ahead of schedule. The implementation time may vary according to local regulations: 1. Guangzhou: Light-duty vehicles will implement China VI starting from January 1, 2019. 2. Jiangsu: All gasoline supplied will comply with China VI starting from October 1, 2018. 3. Guangdong: China VI diesel has been on the market since July 1, 2019. 4. Shandong: The China VI emission standard for motor vehicles will be implemented province-wide starting from July 1, 2019. 5. Shenzhen: China VI will be fully implemented in January 2019. Fuel vehicles with emissions below this standard will be restricted from sale, purchase, and road use.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.