Why does the car keep stalling while driving?

2 Answers
Herb
07/24/25 3:38am
The reasons why the car keeps stalling while driving are: 1. Use of low-quality fuel; 2. Damaged fuel pump; 3. Insufficient driving skills; 4. Faulty spark plugs or ignition coils. Solutions: 1. If the car stalls at idle, simply restart the engine; 2. If the car stalls while coasting, automatic transmission models need to shift into neutral before restarting the engine. When turning off the engine, it is advisable to delay the shutdown, which is beneficial for the engine. After achieving the purpose, do not turn off the engine and remove the key immediately. The recommended delay time is about 30 seconds. Engines with turbochargers require delayed shutdown. After parking, allow sufficient time for the engine and turbocharger to cool and lubricate before shutting down, which can protect the engine and help cool the engine and water temperature.
Was this review help?
9
1
Share
Baker
08/10/25 11:12pm
This car keeps stalling, and there could be several reasons. I think the most common issue is with the fuel supply system, such as a faulty fuel pump leading to insufficient fuel pressure, causing the engine to suddenly shut off due to lack of gasoline. Another common problem is clogged fuel injectors due to impurities in the fuel line, which is more likely to happen when using low-quality fuel. Additionally, ignition system failures, like worn-out spark plugs or damaged ignition coils, can cause the engine to stall if it fails to ignite. If stalling is particularly noticeable at idle, a dirty throttle body or a faulty idle control motor can also make the car unstable. Sensors like the mass airflow sensor malfunctioning, leading to inaccurate computer control, can also be a factor. In any case, safety comes first—don't force the car to run in such conditions. Have a professional check the fuel and electrical systems to avoid dangerous breakdowns on the road.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

How Many Liters of Engine Oil Does a Land Rover Range Rover 5.0 Need?

Land Rover Range Rover 5.0 requires 7.5 liters of engine oil. When adding engine oil, it is essential to ensure that the oil level is between the min and max marks on the dipstick; otherwise, it may affect the normal operation of the engine. The oil level should not be below the min mark or above the max mark on the dipstick. The Land Rover Range Rover is a model from Land Rover, featuring the latest body and chassis technology. Whether it's the breadth of its off-road capabilities and passability or its on-road handling and comfort, the vehicle's all-terrain performance is elevated to a new level. The dimensions of the Land Rover Range Rover are 4999mm in length, 2073mm in width, and 1835mm in height.
20
4
Share

How to Open the Front Hood of Baojun e100?

Method to open the front hood of Baojun e100: There is a front hood switch near the driver's seat. Open the switch, and the front hood will pop up slightly. Insert your hand into the gap of the front hood, pull the lock handle, and it can be opened. The Baojun e100 is the first new energy vehicle under the Baojun brand of SAIC-GM-Wuling. The dimensions of this car are 2488mm in length, 1506mm in width, and 1670mm in height. The Baojun e100 is positioned as a two-door microcar, featuring a perforated grille design paired with slightly exaggerated and unique lines, giving it strong recognition. The body pillars and roof of the new car are treated with color separation and black spraying, embodying a youthful and colorful theme.
19
0
Share

How to adjust the time on Tiggo 3?

Tiggo 3 time adjustment method: Press and hold the button on the instrument panel without releasing it. When the time on the instrument panel starts flashing, you can release the button and then press it to adjust. After adjusting the hour section of the car time, let it flash naturally 5 times, and it will automatically jump to the minute section. At this time, press the instrument panel button again to adjust the time; after all adjustments are completed, let it flash 5 more times and it will automatically stop. Tiggo 3 is Chery's first SUV, with dimensions of 4420mm in length, 1760mm in width, and 1670mm in height. It features a fashionable and dynamic front grille with piano black paint, a new eagle-eye style headlight assembly, and dual five-spoke 17-inch aluminum alloy wheels, giving the overall exterior a more youthful and dynamic appearance.
6
4
Share

How to Accurately Locate the Clutch Half-Engagement Point

Methods for accurately locating the clutch half-engagement point: As you lift the ball of your foot, it's a gradual process of engaging power. When the driving force and resistance are evenly matched, that's the half-engagement state. The correct posture is to place the ball of your left foot at the center of the clutch pedal, with the entire foot moving up and down during operation. During normal vehicle operation, the clutch should be fully engaged without any slippage. Therefore, avoid unnecessarily pressing the clutch or resting your foot on it - instead, place your left foot on the floor to the left of the clutch pedal. The vehicle's clutch is only used during starting, gear shifting, and low-speed braking.
12
3
Share

Where is the AUX port on the 7th generation Accord?

The 7th generation Accord does not have an AUX interface. The AUX interface refers to an audio input interface that can output audio from electronic audio devices including MP3 players, allowing the music from these devices to be played through the car's sound system. AUX is an additional signal line design. In general audio equipment, besides the standard output and input terminals, there are often several additional input/output terminals labeled AUX, serving as backup connection points. The 7th generation Accord is a B-segment car under Honda, with dimensions of 4854mm in length, 1821mm in width, and 1463mm in height.
13
5
Share

Do You Need to Press the Clutch When Downshifting a Manual Transmission Car?

When downshifting a manual transmission car, you need to press the clutch. In an emergency, the correct method is to first press the brake to reduce speed, then press the clutch and quickly shift to a lower gear. Remember, the first action should always be pressing the brake to slow down the car as quickly as possible. However, avoid stomping on the brake suddenly to prevent the engine from stalling. Notes on braking and clutching: If you need to slow down while driving, first press the brake. Do not press the clutch with your left foot while braking with your right foot, as this can cause the car to lose traction suddenly, especially on slippery roads, leading to skidding. When the car is moving at high speed, pressing both the brake and the clutch simultaneously will disconnect the engine's resistance, causing the car to accelerate suddenly. This requires applying more force on the brake to control the speed.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.