Why does the Buick New Excelle make a buzzing sound outside when turning the key?

1 Answers
McJoanna
07/30/25 4:48am
The reason why the Buick New Excelle makes a buzzing sound outside when turning the key is due to a problem with the fuel pump. The following is an introduction about Buick: 1. Logo: The Buick logo is a circle containing three shields of different colors arranged diagonally. The three shields represent three models of cars in the Buick lineup in 1960—Electra, Lesabre, and Invicta. Buick cars are characterized by high horsepower, individuality, practicality, and maturity. 2. Family Crest: The Buick family crest is a red shield-shaped emblem with a silver and sky-blue Go band pattern running from the top left to the bottom right corner. In the upper right corner of the shield is a deer head with antlers, and in the lower right corner is a golden cross with a round hole in the center, the color of which matches the red shield. The three shields signify that the quality of the car is as solid as the three shields.
Was this review help?
20
1
Share
More Forum Discussions

How to Properly Jump Start a Car?

The method for jump starting a car: 1. Prepare two jumper cables and a vehicle that can supply power; 2. Remove the buckle of the battery box to open the battery protective cover, exposing the positive and negative terminals of the battery. Both the rescue vehicle and the vehicle being rescued should be in the off state when operating on the battery; 3. Confirm the positive and negative terminals of the battery. If you cannot distinguish them, avoid connecting the cables randomly; 4. Take one jumper cable, connect one end to the positive terminal of the dead battery and the other end to the positive terminal of the live battery. Do not let the positive and negative terminals come into contact, as there is a risk of short circuit; 5. Take the other jumper cable, first connect it to the negative terminal of the live battery, then connect the other end to the engine block or body of the dead vehicle. Avoid connecting negative to negative; 6. After the cables are properly connected, start the live vehicle to provide a reliable voltage to the dead vehicle; 7. Once the dead vehicle is started and powered by the car's alternator, you can remove the jumper cables, first disconnecting the negative terminal and then the positive terminal.
4
1
Share

What are the differences between the high-end and low-end versions of the Hyundai Elantra?

The main differences between the low-end and high-end versions of the Hyundai Elantra are as follows: Differences in equipment: Interior: The low-end version features fabric seats, while the high-end version comes with leather seats. Steering wheel: The low-end version only serves for steering; the high-end version can control navigation, car phone, audio system, cruise control, etc. Safety systems: Presence of ABS braking system, EBD electronic brake-force distribution system, EDL electronic differential lock system, etc. In simple terms, the main difference between the high-end and low-end versions is the extent of new technology applications. Differences between four-wheel drive and two-wheel drive: Four-wheel drive means all four wheels (front and rear) can act as drive wheels, with a higher chassis. It is suitable for complex road conditions, especially on snowy, muddy, or bumpy roads. Two-wheel drive means only two rear or front wheels act as drive wheels, with a lower chassis. It is best suited for highway driving and requires good driving skills on complex terrains.
6
5
Share

What are the impacts of high mileage on a car?

The impacts of high mileage on a car are as follows: 1. Battery discharge: If the car is driven short distances daily, the battery is likely to discharge. The electricity consumed by each car start takes about 2 minutes of driving to recharge. Theoretically, driving for 10 minutes a day with fewer than 4 starts won't discharge the battery. However, the battery is usually not used just for ignition. People often listen to music or use air conditioning while driving, which gradually drains the battery, leading to discharge issues. 2. Engine oil degradation: Engine oil has a shelf life. If the mileage is too high without maintenance, the lubricating effect of expired oil will decline, affecting the engine's lifespan. Additionally, quality issues arising from exceeding the maintenance period may void the warranty. 3. Increased fuel consumption: Cars frequently started cold will have higher fuel consumption than usual. During a cold start, the engine operates in an open-loop control state. This differs from closed-loop control, which is only influenced by the oxygen sensor. Open-loop control adjusts fuel injection based on data from the engine speed, water temperature, air pressure, and multiple sensors.
1
5
Share

When to Steer the Wheel When Turning a Car?

When making a left turn and noticing the road is narrow, steer the wheel when the right front corner of the car is tangent to the roadside. If the left turn road is relatively wide, you can steer the wheel in advance. Turning techniques: One method is the outside-inside-outside approach, which involves changing lanes to the outside before entering the turn, then slightly steering the wheel. When entering the turn, stay close to the inside, and when exiting, slightly steer the wheel towards the outside of the curve. Another method is slow in, fast out—reduce speed and shift gears before entering the turn, use low speed to navigate the turn, and immediately accelerate and shift up to leave after exiting the turn. Precautions for turning: Always maintain a slow speed when turning the car, and avoid steering the wheel too quickly to prevent skidding. If the car skids, immediately release the accelerator pedal, then steer the wheel towards the side where the rear wheels are skidding. Once the car returns to normal, straighten the wheel and continue driving. Avoid using the brake pedal when turning, especially emergency braking. When turning, coordinate steering the wheel with the curve and match it with the speed to ensure the turning angle is appropriate. Keep both hands on the steering wheel to prevent deviation and potential hazards.
10
3
Share

How many liters does it take to fill up a Nissan Paladin's fuel tank?

Nissan Paladin's fuel tank capacity is 73 liters, which is the officially announced data. The recommended fuel grade for Nissan Paladin is 92, with a fuel consumption of 9.3-10.9L per 100 kilometers. A full tank can cover a distance of 670-785km. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are about 2 segments left to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
1
0
Share

What type of interface is inside the BMW 1 Series armrest box?

The BMW 1 Series armrest box contains a Type-C interface. Type-C is a USB connection interface that can be inserted either way, with dimensions of approximately 8.3mm/2.5mm. Like other interfaces, it supports USB-standard functions such as charging, data transfer, and display output. Main features of Type-C: Fast transmission: Theoretically, the maximum transmission rate of a USB-C port is 10Gb per second. However, Apple states that the USB-C port on the new MacBook has a maximum transmission rate of 5Gbps. The maximum output voltage is 20 volts, which can speed up charging time. In contrast, the USB-A type has a maximum transmission rate of 5Gbps and an output voltage of 5 volts. Multi-port output: The USB-C port on the new MacBook can transfer data, charge devices, and also serve as a video output port to connect to external display devices. Bidirectional transmission: Unlike older USB ports, which only allow unidirectional power transmission, the USB-C port supports bidirectional power transmission. This means it can send power in two ways. Therefore, users can not only charge mobile devices with their laptop but also charge the laptop using other devices or power banks.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.