Why does the Beidou x5 car shake intermittently?

2 Answers
MacDelilah
08/28/25 7:50am
Generally, the issue is caused by tire-related faults, excessive carbon buildup in the fuel injectors and throttle body, or an unbalanced and deformed driveshaft. Below is relevant information: Automobile Repair: Automobile repair is a general term for the maintenance and repair of vehicles. It involves using technical methods to diagnose faults in malfunctioning cars, identify the cause of the problem, and take measures to eliminate the fault and restore the vehicle to certain performance and safety standards. Automobile Faults: Automobile faults refer to phenomena where a vehicle cannot perform its intended functions, such as difficulty starting the engine, failure to start, oil or water leaks, malfunctioning lighting systems, etc. Common manifestations of faults include sudden changes in operating conditions, abnormal noises, unusual odors, abnormal exhaust smoke, temperature irregularities, visible abnormalities, and abnormal consumption of fuel or lubricants.
Was this review help?
8
4
Share
McEva
09/10/25 6:01am
I also experienced a jerking issue when driving my Beidou Xing X5 before, which is mostly caused by engine problems, such as aging spark plugs or ignition system failures being the most common. Over time, spark plugs can accumulate carbon deposits, leading to misfires and severe engine shaking, or even stalling in serious cases. Additionally, clogged fuel pumps or injectors may cause uneven fuel delivery, resulting in jerking. I remember a friend's car had this issue last year, and it smoothed out immediately after replacing the spark plugs. Ignoring it can accelerate engine wear due to prolonged vibrations, affecting overall lifespan. I recommend checking the engine bay components as soon as possible—don’t delay too long. Safety comes first.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Why does the one-button start fail to ignite?

The one-button start device is part of a smart car, serving as a button mechanism to simplify the ignition process while also allowing for engine shutdown. This device can be retrofitted either in place of the original car key lock or as an independent panel. The reasons why the one-button start may fail to ignite are as follows: 1. Steering wheel lock: The steering wheel lock is a simple anti-theft feature. When the car is turned off, rotating the steering wheel a certain angle from its centered position in one direction will cause it to lock with a "click." In this locked state, the one-button start function will not work. Solution: Turn the steering wheel left and right while pressing the engine start button to release tension and unlock the steering wheel. 2. Gear not in Park: Ensure the gear is in the Park position when attempting to start the car. Solution: Shift the gear back to Park. 3. Smart key battery dead: When the smart key's battery is depleted, its signal strength becomes very weak, making it difficult for the car's sensors to detect it, thus preventing the one-button start from completing ignition. Solution: Most smart keys come with a mechanical key that can be inserted directly into the keyhole to start the car.
11
0
Share

What does parallel import mean?

Parallel import refers to the importation of products by importers without the authorization of relevant intellectual property rights holders, where the products are originally placed on the market in other countries or regions by the rights holders themselves or with their consent, and then imported into the country or region where the intellectual property rights holder or exclusive licensee is located. Relevant information about parallel imports is as follows: 1. The subject of parallel imports is products bearing intellectual property rights, more precisely, intellectual property products, not the intellectual property rights themselves. 2. The products involved in parallel imports are genuine goods obtained through legal channels, not counterfeit goods, nor products imported through illegal means such as smuggling, nor products that infringe on relevant intellectual property rights. 3. The intellectual property rights attached to parallel import products are protected by law in the importing country. 4. The act of selling the involved intellectual property products in the importing country by parallel importers is not authorized by the intellectual property rights holders.
14
2
Share

What does the plus and minus sign on the D gear mean?

The plus and minus sign on the D gear indicates the manual mode of an automatic transmission. Pushing towards the plus sign increases a gear, while pushing towards the minus sign decreases a gear. The specific steps for use are: 1. Press the brake pedal; 2. Press the one-touch start button; 3. The dashboard lights up, and the vehicle starts; 4. Place the automatic gear lever in the D plus/minus position to enter manual mode; 5. Push the gear lever forward once to increase a gear; 6. Push the gear lever backward once to decrease a gear. The D gear, also known as the drive gear, when the gear shift lever is placed in this position, the hydraulic system control device automatically connects the corresponding forward gear oil circuit based on the throttle opening signal and vehicle speed signal.
2
2
Share

How to restore the one-touch window lift function for Volkswagen Polo?

Methods to restore the one-touch window lift function for Volkswagen Polo: 1. Raise the window to the top and hold it for 10 seconds; 2. Press and hold the window lift button until the glass reaches the top, then release the switch and press the lift button again within 3 seconds; 3. Press and hold the window down button until the glass reaches the bottom, then press and hold the lift button until the glass reaches the top. The dimensions of the Volkswagen Polo are 4053mm in length, 1740mm in width, and 1449mm in height, with a wheelbase of 2564mm. The car's engine has a maximum power of 83kw and a maximum torque of 145nm.
2
5
Share

What Causes Engine Shaking in a Car?

Reasons for engine shaking in a car: 1. Dirty throttle body or excessive carbon buildup in the fuel injectors; 2. Poor performance of the ignition system or spark plugs; 3. Unstable fuel pressure; 4. Incorrect timing belt tension; 5. Exhaust pipe leakage. Factors necessary for proper engine operation: 1. Sufficient ignition energy; 2. Appropriate air-fuel mixture for the operating conditions; 3. Adequate cylinder pressure. During operation, some engine vibration is inevitable, but under normal circumstances, the engine's vibration should be smooth and regular. If you notice a significant increase in shaking or persistent vibration, it's important to inspect and repair the engine.
10
3
Share

What is the reason for the TC light on the Buick GL8 dashboard?

Reasons for the TC light on the Buick GL8 dashboard: 1. Faulty solenoid valve; 2. Dirty engine oil, clogged solenoid valve filter screen; 3. Wear of actuator gears and impellers leading to oil pressure leakage and triggering an alarm; 4. Dirty throttle. TC refers to the Traction Control System, which ensures optimal traction under various driving conditions. The Buick GL8 has a body length, width, and height of 5238mm, 1878mm, and 1776mm respectively, with a wheelbase of 3088mm. The vehicle is equipped with a high-performance ADM small module unit system, featuring 18 independent high-beam lighting zones and offering 8 lighting modes, including ADB anti-glare high beams, to ensure nighttime driving safety with intelligent technology.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.