Why does the BAIC T99 reversing camera not display?
2 Answers
Regarding the specific reasons why the BAIC T99 reversing camera does not display, the details are as follows: 1. The reversing camera not displaying is due to poor line contact: it is necessary to promptly inspect the wiring and the installation connection points, carefully checking for any loose connections. When a loose connection is detected, the interface should be promptly disconnected and reconnected, and the reversing camera will return to normal. 2. The video power cable has aged: it is necessary to promptly replace the video power cable with a new one. 3. The reversing camera is also known as a parking assist system: reversing cameras are widely used in various large, medium, and small vehicles for reversing or driving safety assistance. The automotive reversing camera is a complete system.
The issue of the reversing camera not displaying is quite common on the Bestune T99. I've encountered it several times while driving. The main causes include a malfunctioning camera itself, such as dust or water on the lens obstructing the view, or loose or damaged rear wiring affecting signal transmission. A blown fuse can also cut power to the system—check the vehicle manual to locate the reversing camera's fuse and see if it's blown. Software issues should also be considered, as incorrect system settings or failed updates can lead to this problem. I recommend starting with simple DIY fixes: clean the camera surface to check for obstructions, restart the vehicle, and if that doesn't work, take it to a professional repair shop. Safety first—without the reversing camera, backing up becomes difficult, especially at night when accidents are more likely. Regular maintenance should include keeping the camera area dry to prevent water damage.