···
Log in / Register

Why does the 2020 RAV4 produce a 'clicking' noise?

3 Answers
HavenFitz
09/05/25 5:53am
2020 RAV4 noise issues can stem from engine or transmission problems. Below are detailed explanations of the specific causes: Engine Noise: Abnormal sounds from the engine compartment are typically metallic screeching noises. Engine noises mainly occur due to excessive wear of certain components or improper assembly and adjustment. These noises often indicate potential engine failures, so it's crucial to promptly visit a repair shop when such sounds are detected to prevent further damage. Transmission Noise: Transmission noises are generally caused by bearing or gear wear. When abruptly accelerating during driving, noises can be heard from the chassis area. Gears may produce a 'clicking' sound, while bearing failures typically generate a 'rustling' noise, which can escalate to a 'rattling' or 'whistling' sound in severe cases. Transmission repairs are costly, so regular inspections and frequent oil changes are essential. Body Noise: This usually results from poor material stiffness of the body itself. Over time, deformation causes friction with other components, leading to noise. Applying adhesive strips to the friction points can often alleviate the issue. Additionally, prolonged driving may loosen certain parts, requiring identification and securing of these loose components.
Was this review help?
5
3
Share
GrahamMarie
09/17/25 6:17am
Speaking of the 2020 RAV4, I've personally experienced the clicking noise issue. The common cause is loose suspension components, such as the lower control arm or shock absorber joints not being properly secured. You'll hear the noise when driving on bumpy roads, and leaving it unfixed for a long time may lead to greater wear on the suspension system. I once discovered loose screws during a long-distance drive in my RAV4, and tightening them myself solved the problem. I recommend taking time to have a professional shop inspect the chassis with a lift—don't ignore this minor issue, or the repair costs could be much higher. Checking the screws during regular maintenance can help prevent similar situations.
Was this review help?
14
5
Share
Expand All
OCharles
10/31/25 6:45am
Based on my car repair experience, clicking noises often originate from the brake system or engine mounts. The 2020 RAV4's chassis design sometimes leads to loose screws, especially after prolonged driving on urban potholed roads, which can cause such sounds. For instance, unstable brake disc fixation or displaced belt tensioners may trigger this noise. Try shaking the tires yourself to check for looseness; if unresolved, consult a technician for diagnostic tool testing. Timely resolution is crucial to avoid compromising driving safety and increasing fuel consumption. Monitor abnormal noise frequency during daily driving—visit the dealership once it becomes frequent, as they offer free adjustments for certain components.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

When is the first maintenance for Volkswagen?

Volkswagen's first maintenance is scheduled at 6 months or 5,000 kilometers. The detailed regulations for Volkswagen's first maintenance are specified in the vehicle maintenance manual, and you can follow the instructions provided in the manual. Here are the specific details about Volkswagen car maintenance: Maintenance content: Replace engine oil and oil filter, clean the air filter, check whether the generator belt and wiper blades are damaged; whether the levels of various fluids are normal; whether the tire pressure is normal and if there is any uneven wear, bulging, or damage to the tires; inspect the car chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; check whether all switches and lights in the car are working properly. Precautions during maintenance: Make an appointment with the 4S store in advance before maintenance; record any faults or questions encountered while driving and inform the staff during the maintenance registration.
6
0
Share

What are the differences between National 5 and National 6?

The differences between National 5 and National 6 are: 1. Different control levels: National 6 places more emphasis on the environmental pollution caused by vehicle exhaust compared to National 5. 2. Different release dates: National 5 was released on September 17, 2013; National 6 was released on June 22, 2018. 3. Different issuing departments: National 5 was issued by the environmental protection department; National 6 was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine. 4. Different requirements: National 6 has the same emission standards; National 5 has different standards. 5. Different strictness: National 6 adopts the strictest values from National 5 emission requirements. National 6 improves gasoline quality, reduces pollutants and exhaust emissions, and is more environmentally friendly.
8
1
Share

Is Running a Red Light Captured from the Front or the Rear?

Running a red light is captured from the rear. Electronic cameras take three photos to determine the violation. The first photo shows the vehicle crossing the stop line at the intersection, including the red light signal and license plate number. The second photo captures the vehicle completely passing the stop line, also showing the red light signal and license plate number. The third photo provides evidence of the vehicle continuing to move, primarily by comparing the position change from the second photo, again including the red light signal and license plate number. Capturing these three photos confirms the vehicle ran a red light. Article 26 of the Road Traffic Safety Law clearly stipulates the act of running a red light. Traffic signals consist of red, green, and yellow lights. A red light prohibits passage, a green light permits passage, and a yellow light serves as a warning. Running a red light is a traffic violation where a vehicle proceeds through an intersection against the red signal. Here are some tips to avoid running a red light: Check the arrow light first, then the circular light: Currently, there are two types of traffic lights: arrow signals and circular signals. When arrow signals are present, drivers should first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow is red, right turns are prohibited, and violating this rule will be penalized as running a red light. Brake in time: When a red light appears, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross, and the rear wheels follow, the electronic camera will capture the violation, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, the vehicle must wait for the green light before proceeding. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, drivers can judge accordingly. If there is no countdown, vehicles close to the intersection and moving at a higher speed may proceed to avoid running a red light due to delayed braking. If the speed is slow and the vehicle is far from the intersection, immediate braking is necessary to avoid running the red light. Article 38 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China states: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not hinder the passage of straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. At intersections without non-motorized vehicle or pedestrian signals, non-motorized vehicles and pedestrians should follow the motor vehicle signal indications. When the red light is on, right-turning vehicles may proceed if they do not hinder the passage of other vehicles or pedestrians. Running a red light is not considered a violation under the following circumstances: Yielding to emergency vehicles: Yielding to ambulances, fire trucks, or other emergency vehicles. If captured by surveillance cameras while yielding, the violation will not be recorded during manual review. Even if recorded, drivers can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, making it difficult for electronic police to clearly see the traffic lights, the evidence of violation may be blurred. In such cases, mistakenly running a red light will not be penalized. Emergency situations: When transporting a critically ill patient to the hospital, running multiple red lights may occur. After delivering the patient, the driver can provide hospital or patient documentation to the traffic police for verification. If confirmed, the violation records will be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Traffic police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers should follow the gestures of the traffic police. The traffic police department clarifies that according to the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China, vehicles that have already crossed the stop line when the yellow light flashes may continue to proceed. If a driver accelerates through the intersection after the yellow light has turned on, it will still be considered running a red light if captured.
3
1
Share

How to Determine if a Thermostat is Functioning Properly?

Thermostat's role is to automatically adjust the amount of water entering the radiator based on the temperature of the coolant, changing the water's circulation range to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within an appropriate temperature range. The thermostat must maintain good technical condition; otherwise, it will severely affect the engine's normal operation. For instance, if the thermostat's main valve opens too late, it can cause the engine to overheat; if the main valve opens too early, it prolongs the engine's warm-up time, resulting in the engine temperature being too low. The on-vehicle inspection method for the thermostat is as follows: 1. First, observe whether the coolant is sufficient. 2. After starting the engine, check the water flow rate. 3. After the water temperature rises, check the changes in water flow rate and temperature.
1
1
Share

What is the comprehensive fuel consumption of the Passat?

Passat 1.8t fuel consumption is 6.8 liters. The following is an introduction to fuel consumption: Reasons for increased fuel consumption: Displacement: The engine displacement has a certain impact on the car's fuel consumption, but this impact is a fixed value. Tire pressure: The car's fuel consumption is also directly related to tire pressure. When the tire pressure is too high or too low, the car's fuel consumption will increase. Road conditions: The road conditions on which the car is driven also affect fuel consumption. Methods to reduce fuel consumption: Start slowly, avoid sudden acceleration, shift gears at low RPM, do not compete with others at traffic lights, repair any dents on the car body, close windows at high speeds to reduce drag, coast in high gear (never coast in neutral as it may lead to steering and brake failure), and note that personal driving habits can make a big difference. Drive safely: do not drive under the influence of alcohol, do not drive while fatigued, do not exceed speed limits or overload, and always wear your seatbelt.
4
1
Share

What are the consequences of exceeding the vehicle annual inspection deadline?

Exceeding the annual inspection deadline means the vehicle cannot be driven on the road. There is no grace period for annual inspections—even one day over the limit prohibits road use. Below is the vehicle annual inspection process: Schedule an appointment in advance: Inspection stations are usually less crowded at the beginning of the month and busier toward the end. Therefore, it's best to schedule the inspection for early in the month to avoid long wait times. Handle traffic violations and check insurance: Before the inspection, check if your vehicle has any outstanding traffic violations. If so, you must resolve them at the traffic enforcement office before proceeding with the inspection. Also, ensure your insurance is valid. Clean the vehicle exterior and perform maintenance: If the car has obvious issues, take it to a repair shop first. Inspection station procedures: First, verify compulsory insurance and the vehicle registration certificate. Next, inspect the exterior (any stickers or decals must be removed). Then, check the vehicle identification number (VIN) to confirm authenticity and prevent fraud. Finally, test emissions, brakes, and lights.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.