···
Log in / Register

How to Replace the Air Filter of Baojun 730?

6Answers
DiWillow
07/29/2025, 03:54:47 AM

Baojun 730 air filter replacement method: The air filter of Baojun 730 is located behind the glove box. After removing the glove box, take out the old filter and install the new one. The air cleaner, also known as the air filter, is used to purify the air entering the engine and should be replaced regularly. A dirty air filter may cause symptoms such as insufficient air intake, lack of power, and unstable idle speed. The Baojun 730 is an MPV produced by SAIC-GM-Wuling, equipped with a 1.5T 147 horsepower L4 engine and a 6-speed manual transmission. The engine has a maximum power of 108kW, a maximum torque of 250Nm, and a top speed of 170km/h.

Was this review help?
111
Share
LaCharles
08/12/2025, 10:55:37 PM

I've been driving the Baojun 730 for several years, and replacing the air filter is a routine task. First, open the hood and locate the rectangular black box in the engine compartment, usually positioned at the front right near the windshield wipers. Gently release the plastic clips or screws to open the cover. When removing the old filter, be careful not to let dust fall into the intake pipe. You can use a vacuum cleaner to suck up any remaining dust in the box or wipe it clean with a damp cloth. Then, insert the new filter, making sure the arrow direction points toward the engine side to ensure proper airflow. After closing the box, press the clips firmly or tighten the screws to ensure a good seal. I usually replace it every 10,000 kilometers or once a year to keep the engine running smoothly, reduce fuel consumption, and save money and time. Normally, I buy OEM or compatible filters on Taobao—they're cheap and convenient, avoiding extra costs at repair shops. After doing it a few times, you'll get the hang of it—safe and efficient.

Was this review help?
17
Share
Expand All
Holden
10/04/2025, 11:09:41 PM

As a new owner of the Baojun 730, I personally changed the air filter, and the whole process was incredibly simple and hassle-free. After starting the engine and opening the hood, the filter box is located at the front left, easy to find. Just loosen a few clips with a Phillips screwdriver to open the cover effortlessly. When removing the old filter, I noticed it was covered in dust, so cleaning the inside of the box is crucial to prevent impurities from mixing with the new part. Then, insert the new filter, making sure the arrow aligns with the intake pipe direction before pressing it in, and reattach the cover securely. This time, it only took me a few minutes, saving the cost of a trip to the dealership while learning a practical skill. A reminder to everyone: when buying filters online, choose the genuine Baojun 730 model—affordable and reliable. Regular replacement protects the engine and enhances acceleration, definitely worth trying. The tools needed are minimal—just a screwdriver will do.

Was this review help?
15
Share
Expand All
Isabel
11/17/2025, 11:41:32 PM

Replacing the air filter of the Baojun 730 is a basic maintenance procedure. Open the hood and locate the filter housing, typically positioned at the front-right section of the engine compartment. Open the housing to remove the old filter, ensuring to clean the interior cavity to prevent dust from entering the engine system. When installing the new filter, align it with the airflow direction indicated by the arrow. Secure the cover to complete the replacement. This step helps optimize engine performance and reduce wear. It is recommended to replace the filter regularly to maintain fuel efficiency, usually inspected every 15,000 kilometers. DIY replacement saves costs, and choosing an OEM-compatible filter is sufficient. Safety first—wear gloves during the operation.

Was this review help?
9
Share
Expand All
Paisley
01/08/2026, 01:17:47 AM

As a family user of the Baojun 730, replacing the air filter is quite straightforward. After starting the vehicle and opening the hood, the filter box is located in the upper middle part of the engine compartment. Unscrew a few clips to remove the old filter, then clean the interior dust with a vacuum or cloth. When installing the new filter, ensure the arrow points towards the engine, then cover the box and tighten the clips. This operation improves airflow and protects engine health. I do it once a year to ensure safe and smooth driving. When purchasing filters online, choose products with good reviews—they are affordable and reliable. Regular maintenance saves you from repair troubles, and it's easy enough for routine upkeep.

Was this review help?
6
Share
Expand All
KeeganFitz
04/04/2026, 11:53:38 PM

Replacing the air filter of the Baojun 730 is a cost-effective DIY project. Open the hood to locate the filter box, use tools to loosen the clips and remove the old filter, then clean the dust inside the box. When installing the new filter, align it with the arrow direction and securely fasten the lid. Regular replacement can improve fuel efficiency and extend engine life. Doing it yourself is low-cost, with the filter priced at just over 20 yuan, avoiding expensive service fees at repair shops. It is recommended to check every 10,000 kilometers to save on long-term maintenance costs. Purchase the correct model online to ensure reliable quality, and the operation is simple and easy to learn.

Was this review help?
6
Share
Expand All
More Q&A

What's the reason for the sudden unresponsiveness of the car's 360-degree panoramic view?

The reasons for the sudden unresponsiveness of the car's 360-degree panoramic view: First, check whether the screen is damaged; secondly, check for wiring issues; finally, inspect the battery module and power supply problems. It is recommended to seek professional help for inspection and troubleshooting. The working principle of the 360-degree panoramic imaging function is not complicated and can even be seen as an enhanced version of the reverse camera function, which utilizes four ultra-wide-angle lenses distributed around the front, rear, left, and right sides of the vehicle. Here is additional information: 360 Panoramic View: The 360° panoramic view can help drivers eliminate blind spots, effectively reducing accidents such as scratches and fraudulent claims through comprehensive driving recording, ensuring driving safety. It has already become a 'hot trend' in the automotive aftermarket electronics sector.
102
Share

What to Do When the Car Won't Start Due to a Dead Battery?

Solutions for a car that won't start due to a dead battery: 1. Push-starting can be used as an emergency measure, though this only applies to manual transmission vehicles; 2. Jump-starting with cables from another vehicle; 3. Using a portable emergency power bank to charge and start the car. In low-temperature environments, the battery's capacity can be significantly lower than under normal conditions. Some batteries, especially those that have been in use for several years, may easily lose charge when parked overnight in snowy or icy weather or left unused for extended periods, leading to starting issues. When the dashboard indicates insufficient battery power, it's important to charge the battery promptly. Even if the car is left unused for a long time, the battery will gradually lose its charge even in idle state.
107
Share

What is the displacement of a car labeled 220?

220turbo is equivalent to a 1.5L displacement. The Honda Civic 220turbo series all adopt the latest generation Earth Dreams 1.5T turbocharged engine, with a maximum output power of 177 horsepower and a maximum torque of 220 Nm. Below is additional information: Displacement: A specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Car displacement is an important parameter for measuring a vehicle. Some domestic cars may not have this type of model number at the rear, but their displacement is usually indicated on the body or rear of the car.
104
Share

Is it illegal to modify a car steering wheel?

Modifying a car steering wheel is not illegal. Here is some information about vehicle modifications: 1. The meaning of car modification: Car modification refers to the alteration of the external appearance, interior design, and mechanical performance of a vehicle from its original manufacturer's specifications, based on the owner's needs. It mainly includes two types: body modification and performance modification. 2. Relevant regulations on car modifications: (1) Parameters related to car technology, such as engine displacement and turbocharging, must not be modified privately. Laws and regulations impose restrictions on car modifications. (2) The car model and engine model cannot be changed, and the body structure must not be damaged. If the engine or body is replaced, the vehicle must be inspected, and a qualified certificate of motor vehicle safety technical inspection must be submitted.
112
Share

What could be the reason for the Mercedes-Benz GLA200 not responding when shifting gears?

Mercedes-Benz GLA200 not responding when shifting gears may be caused by issues such as transmission valve body failure, transmission shift mechanism failure, or internal friction plate failure in the transmission. Below is some relevant information about the Mercedes-Benz GLA200: 1. Exterior: As an entry-level crossover SUV model, the Mercedes-Benz GLA reflects the design style of the Mercedes-Benz A-Class. The new car's headlights feature the latest design from the Mercedes-Benz family, incorporating LED daytime running lights as always. The raised lines on the engine hood give it a dynamic and sharp look. In terms of dimensions, the Mercedes-Benz GLA measures 4417mm in length, 1804mm in width, and 1494mm in height, with a wheelbase of 2690mm. 2. Powertrain: The Mercedes-Benz GLA200 is equipped with a 1.6T turbocharged engine, delivering a maximum power of 115kW and a peak torque of 250Nm.
107
Share

Is Wheel Alignment Necessary When Replacing All Four Tires?

Simply replacing tires generally does not require a wheel alignment. However, if the vehicle has experienced severe impacts such as collisions, a wheel alignment is necessary. Below is supplementary information about wheel alignment: 1. Reasons for wheel alignment: Because there are specific angles and relative positions between the car tires, steering mechanism, and front and rear axles. After tire replacement, these angles and positions may become misaligned, leading to issues such as the vehicle pulling to one side, reduced steering precision, an off-center steering wheel, or uneven tire wear, which necessitate timely wheel alignment. 2. Purpose of wheel alignment: Wheel alignment ensures that the tires maintain the optimal angle relative to the vehicle body, reduces wear between the tires and steering components during driving, ensures tight contact between the tires and the road, and helps the vehicle maintain stable straight-line driving.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.