···
Log in / Register

Why does it take more than 10 hours to fully charge an electric vehicle?

4 Answers
OAllie
09/09/25 2:42am

It may take more than 10 hours to fully charge an electric vehicle because the battery is new or due to a malfunction in the battery charger display. Below is relevant information about electric vehicle batteries: Definition: The electric vehicle battery is the power source for electric vehicles. Most electric vehicles are equipped with lead-acid batteries, which are cost-effective and offer good value for money. These batteries are rechargeable and reusable, hence the name 'lead-acid battery'. Types: Electric vehicles use the following four types of power batteries: valve-regulated lead-acid maintenance-free batteries, gel lead-acid batteries, nickel-metal hydride batteries, and lithium-ion batteries.

Was this review help?
5
4
Share
SanRyan
09/20/25 7:36am

I also encountered the issue of not being able to fully charge my electric car even after 10 hours of charging, which was quite frustrating. The reason might be severe battery aging—after several years of use, the battery capacity shrinks, leading to slower charging. Insufficient charging pile power is another common issue; for example, older home chargers have low power output, so trying a fast-charging pile or upgrading the equipment might help. Environmental temperature also plays a role—battery efficiency drops in cold weather, while overheating can occur in summer. Check your charging settings, like the charging limit set in the mobile app—if it's capped at 80%, of course it won't charge fully. Lastly, there could be wiring issues, such as poor contact or broken charging cables, which can interrupt the charging process. I recommend trying a different charging pile first; if that doesn’t work, take it to a service center for a full inspection—don’t delay it.

Was this review help?
15
5
Share
Expand All
DelHarmony
11/03/25 8:00am

The electric car takes so long to charge but still doesn't reach full capacity, which might be due to software or control unit issues. A friend mentioned that a faulty BMS system in the vehicle can cause charging interruptions, or the app might have incorrectly set charging time limits. Problems with the charging equipment are also common factors, such as internal faults in the charger or incorrect power adaptation. If the voltage is unstable, aging household sockets might lead to insufficient input current. Poor battery health, especially in high-mileage vehicles, can significantly reduce range. It's recommended to use a meter to check voltage and current and avoid charging in extreme weather. If all else fails, try updating the vehicle's firmware. Paying attention to these details can improve efficiency.

Was this review help?
15
4
Share
Expand All
RyderAnn
12/17/25 8:00am

I've encountered similar issues when using an electric car. Simply put, it's either the charging station isn't compatible or the charging port is dirty. First, check if the plug is loose or dirty, and try cleaning it. If that doesn't work, it might be due to battery aging, especially after a few years of use, as the range naturally decreases. Additionally, the charger's power might be insufficient—for example, a regular wall charger is much slower than a fast charger. In terms of settings, check the charging limit in the app. My solution was to try charging at a different location. If it still doesn't charge fully, take it in for repairs. Nowadays, there are plenty of new charging stations, so updating the equipment should do the trick.

Was this review help?
9
1
Share
Expand All
More Forum Discussions

What to Do When the Clutch Fails to Disengage?

Methods for dealing with a clutch that fails to disengage: 1. Check if the intermediate pressure plate is installed backward, if the separation spring is too soft or broken, or if the position is incorrect or unqualified, then adjust or replace as necessary; 2. If the clutch pedal feels loose and the working push rod does not move, it indicates there is air in the oil circuit, and bleeding the system is required; 3. If the master cylinder or working cylinder is leaking oil, clean the inner cavity and piston or replace the rubber cup and sealing ring; 4. Check if the height of the inner ends of the release levers is consistent and if the release lever bracket bolts are loose, then adjust or tighten them; 5. For double-disc clutches, check and adjust the gap between the limit screw and the intermediate driving plate one by one to meet the requirements; 6. If the newly replaced friction plate is too thick, add appropriately thick shims between the clutch cover and the flywheel to adjust, ensuring the thickness of each shim is consistent.
13
5
Share

What engine is equipped in the GAC Trumpchi GS7?

GAC Trumpchi GS7 is equipped with a domestically developed 2.0T turbocharged engine by GAC Motor, with the engine model being 4B20M1. This engine delivers a maximum power of 185 kW, a maximum torque of 390 Nm, and a maximum horsepower of 252 hp. The maximum torque speed ranges from 1,750 to 4,000 rpm, while the maximum power speed is 5,250 rpm. GAC Trumpchi GS7 is a 5-seater mid-size SUV model launched by GAC Trumpchi, with dimensions of 4,730 mm in length, 1,910 mm in width, and 1,770 mm in height, and a wheelbase of 2,720 mm. In terms of interior design, the vehicle also adopts a family-style design, with the center console panel and door handles on both sides featuring imitation carbon fiber trim panels.
2
4
Share

How to Turn on the High Beam of the Chevrolet New Cruze?

To turn on the high beam of the Chevrolet New Cruze: Simply push the lever outward. However, there is a prerequisite for turning on the high beam, which is to first turn on the low beam, as the high beam cannot be activated in other lighting positions. Pulling the lever inward once to flash the high beam does not have any restrictions and can be operated even when the lights are off. The Chevrolet Cruze is a compact family sedan in the A-segment market produced by Shanghai GM Chevrolet. The vehicle has a length of 4666 mm, a width of 1807 mm, a height of 1460 mm, and a wheelbase of 2700 mm. In terms of interior, the Cruze features high-quality materials, with decorative panels and door trims in different colors, all finished in matte materials, enhancing the overall texture of the interior and ensuring high-quality interior design.
17
5
Share

When Can I Check the Illegal Records of My Car?

Illegal record inquiry time for cars: For local on-site violations, the violation information can generally be checked within 7 working days. For non-local non-on-site violations, it usually takes about 15 days to check the violation information. Methods to inquire about violation records: 1. Visit the office halls of traffic branches and teams in various cities and districts to inquire through touch query terminals; 2. Log in to the traffic violation record inquiry websites of the public security traffic management bureaus of various cities, enter the license plate number and vehicle engine number, and click to inquire; 3. Call the voice inquiry numbers of various cities and districts; 4. Inquire by composing a mobile phone text message; 5. Install mobile apps such as National Violation Inquiry on your phone, enter the license plate number, engine number, car model, etc., to conduct the inquiry.
19
5
Share

What are the body dimensions of the Roewe RX3?

The Roewe RX3 has a body length of 4408 mm, a width of 1804 mm, and a height of 1651 mm, with a wheelbase of 2625 mm. The Roewe RX3 is a compact SUV under the Roewe brand, equipped with two engines: a 1.6-liter naturally aspirated engine and a 1.3-liter turbocharged engine. The 1.6-liter naturally aspirated engine delivers a maximum power of 92 KW and a peak torque of 158 NM, paired with an Aisin CVT transmission. The 1.3-liter turbocharged engine produces a maximum power of 120 KW and a peak torque of 230 NM, matched with the third-generation Aisin 6AT transmission.
9
4
Share

How to Handle a Tire Blowout at High Speed?

Methods to handle a tire blowout at high speed: 1. If the front tire blows out, firmly grip the steering wheel to adjust the car's direction. Avoid repeatedly jerking the steering wheel or slamming on the brakes. Wait for the vehicle to gradually slow down before gently steering to a stop. Then, set up a warning triangle behind the car to prevent secondary accidents. 2. If the rear tire blows out, ease off the accelerator and downshift to bring the car to a slow stop. To ensure even tire wear on the same vehicle, rotate the tires every 5,000 kilometers and perform a four-wheel alignment every 5,000 to 10,000 kilometers to avoid abnormal or excessive tire wear. Additionally, do not install tires of different models or with significant differences in wear on the same axle.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.