Why Do Used Vernas Retain Their Value So Well?

What to Do When the Brake Caliper Makes Metal Clanking Noises?

Remove the two caliper pins on the brake pump and apply grease, or replace all non-rubber caliper pins with rubber ones. Below is an introduction to brake calipers: 1. Overview: A caliper is a tool for measuring length, categorized into non-dial calipers and dial calipers. External calipers are used to measure the outer diameter of a cylinder or the length of an object, while internal calipers are used to measure the inner diameter of a cylindrical hole or the width of a groove. 2. How to Use Calipers: For external calipers, place one measuring surface against the end of a steel ruler and align the other measuring surface with the desired measurement mark, ensuring both surfaces are parallel to the ruler. The method for using internal calipers is similar, except that the end of the steel ruler must rest against an auxiliary plane, with one foot of the internal caliper also against this plane.

19

4

Share

When Will the Mandatory Scrapping of Motorcycles Be Abolished?

So far, the regulations regarding motorcycle scrapping have not changed. However, the 13-year mandatory scrapping policy for motorcycles will soon be abolished, though the specific changes are still under discussion. Reasons for abolishing the policy: 1. Fewer riders: The number of motorcycle riders is very small, making it a niche demand. Some even spend large sums of money on motorcycles just for collection purposes. Additionally, the quality of motorcycles has improved significantly compared to the past, making the 13-year mandatory scrapping rule no longer suitable for current conditions. 2. Infrequent use: Many motorcycles that are not frequently used remain in like-new condition even after 13 years, with low mileage. Some owners are unwilling to discard their motorcycles that have reached the scrapping age and instead keep them at home as memorabilia. However, these memorabilia cannot be driven on the road and take up significant space.

13

0

Share

How to Reset Porsche Tire Pressure Monitoring System Malfunction

First, turn the one-touch start button on the left side of the steering wheel to start the vehicle; otherwise, the tire pressure cannot be reset. Press the custom button on the right side of the multifunction steering wheel. Then press the + button on the left side of the multifunction steering wheel. Finally, press the lever below the steering wheel and pull it downward to select the clear function. Afterward, observe the tire pressure information on the dashboard to confirm the tire pressure has been reset. If the tire pressure monitoring system warning light comes on while driving, remain calm and do not panic. Immediately reduce your speed, avoid sharp steering and sudden braking, and check the tires right away. If you have a portable inflator or tire pressure gauge, pull over to the side of the road to check and inflate each tire. If not, drive slowly to the nearest service area, auto repair shop, or 4S store to adjust the tire pressure to normal levels before resetting the tire pressure light. Apart from using a specialized diagnostic tool to clear the fault code and reset the tire pressure light, models equipped with a tire pressure reset button can also be manually operated when the tire pressure is normal.

7

4

Share

How many points are deducted for the car body touching the line in the reverse parking test of Subject 2?

In the reverse parking test of Subject 2, touching the line with the car body results in a deduction of 100 points. Here are the specific details: 1. Scoring rules: In Subject 2 reverse parking, touching the line with the mirrors (rearview mirrors) does not count as crossing the line. As long as the car body or wheels do not touch the line, it is not considered crossing the line, since the rearview mirrors are very protruding and are not included in the car body crossing the line range. Deductible items in reverse parking include not following the prescribed route or sequence of driving, which directly results in a deduction of 100 points, car body crossing the line deducts 100 points, failing to park properly in the reverse parking deducts 100 points, and stopping midway deducts 100 points. 2. Score confirmation: For Subject 2, if you fail the test once, you can retake it once. If you do not participate in the retake or fail the retake, the test is terminated, and the applicant should reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of rescheduled tests for Subject 2 and Subject 3 road driving skill tests cannot exceed five times. If the fifth rescheduled test is still failed, the results of other subjects that have been passed will be invalidated.

17

2

Share

How to Handle 12-Point Deduction for Driving a Scrapped Vehicle?

Analysis and handling methods for the situation of receiving a 12-point deduction for driving a scrapped vehicle are as follows: 1. Situation Analysis: The motor vehicle driven does not match the vehicle type permitted by the driver's license. The motor vehicle is driven in reverse, parked, or makes a U-turn on the highway. Driving under the influence of alcohol. Fleeing the scene after causing a traffic accident. Driving a motor vehicle without displaying license plates or intentionally covering them. 2. Handling Methods: After a 12-point deduction on the driver's license, the driver must report to the local public security traffic management department or vehicle management office. This is because a driver's license with 12 points deducted requires the driver to participate in a training course and pass an examination before the license can be reinstated for driving. Otherwise, the license cannot be used.

6

5

Share

Do new cars come with chassis guards from the factory?

New cars generally do not come with chassis guards from the factory. The following are specific details about the automobile chassis: 1. Introduction: The automobile chassis consists of four parts: the transmission system, running system, steering system, and braking system. The function of the chassis is to support and install the car engine and its various components and assemblies, form the overall shape of the car, receive the power from the engine to make the car move, and ensure normal driving. 2. Maintenance details: To maintain the chassis in winter, thorough chassis cleaning and anti-rust treatment should be performed. First, the chassis must be thoroughly cleaned. If there is excessive mud and dirt on the chassis, a degreasing cleaner should be used to wash it again to reveal the original "color" of the chassis, so that anti-rust care can begin. In professional car beauty shops, the car can be lifted on a hoist for chassis cleaning and wiping, followed by anti-rust care.

12

2

Share

Why Do Used Vernas Retain Their Value So Well?

What to Do When the Brake Caliper Makes Metal Clanking Noises?

When Will the Mandatory Scrapping of Motorcycles Be Abolished?

How to Reset Porsche Tire Pressure Monitoring System Malfunction

How many points are deducted for the car body touching the line in the reverse parking test of Subject 2?

How to Handle 12-Point Deduction for Driving a Scrapped Vehicle?

Do new cars come with chassis guards from the factory?

How to Take the Driving Test Subject 2 in Heavy Rain?

How to Maintain and Repair Without a Local 4S Store?

What is the difference between AT tires and MT tires?

What Causes the Abnormal Noise When Starting an Automatic Transmission Car?