Why Did Honda Launch Three-Cylinder Cars?

Can a Second-hand Car Purchased in Another Location Be Licensed Locally?

Whether a second-hand car purchased in another location can be licensed locally depends on specific circumstances. 1. If it meets the local emission standards, it can be licensed locally; 2. If it does not meet the local emission standards, it cannot be licensed locally. Below is additional information: The procedures for registering the car in a different location are as follows: 1. Retrieve the vehicle's files from the place of purchase; 2. Submit the retrieved files to the local vehicle management office for review. Once the review is passed, the registration process can begin. The required documents for the transfer process include: vehicle identification number rubbing, driving license, registration certificate, original vehicle purchase invoice or transfer invoice, valuation sheet, original or temporary ID cards of both buyer and seller, transfer contract (for corporate entities: affix a copy of the authorized person's ID card) and copies (1 copy each of the registration certificate, invoice, and original owner's ID card, 2 copies of the driving license, and 3 copies of the buyer's ID card), power of attorney from both parties, and the "Motor Vehicle Transfer Registration Form".

14

5

Share

How to Turn on the Fog Lights of Chevrolet Cavalier?

To turn on the fog lights of the Chevrolet Cavalier, follow these steps: First, turn on the vehicle's parking lights. The fog light switch is located on the lower left side of the steering wheel. Press the rear fog light button once to activate it. Below are detailed explanations about fog lights: 1. Fog lights are divided into front fog lights and rear fog lights. Front fog lights are usually bright yellow, while rear fog lights are red. The symbol for the rear fog light differs from the front fog light in that the front fog light symbol has downward-pointing light lines, whereas the rear fog light symbol has parallel lines. These symbols are located on the dashboard inside the vehicle. Due to their high brightness and strong penetration, fog lights do not produce diffuse reflection in foggy conditions, so proper use can effectively prevent accidents. In foggy weather, front and rear fog lights are typically used together. 2. Red and yellow are the colors with the strongest penetration, but red signifies 'no passage,' so yellow is chosen. Yellow is the purest color, and the yellow fog lights of a car can penetrate thick fog and shine over long distances. Additionally, due to backscattering, when the driver of the following vehicle turns on the headlights, it increases the background intensity, making the image of the vehicle ahead even more blurred.

13

0

Share

What tires does the Haval H7 use?

Haval H7 is equipped with 235/55-R18 Kumho tires. Kumho Tires has a complete production line, covering passenger car tires, commercial vehicle tires, high-tech tires and other categories. Tires are one of the most important components of a car. Their main functions are to support the entire weight of the vehicle, bear the load of the car, and transmit forces and torques in other directions to deliver traction and braking torque, thereby improving the car's power performance, braking performance and passability. Notes for tire replacement: 1. Choose the right tires. The specifications of the new tires must be the same as the previous ones and must match the other tire on the same axle, such as speed rating, load index, tread pattern, brand, size, etc., to ensure safe driving. 2. The valve should also be replaced. This is because when replacing tires, the aging cycle of the new tire and the valve may differ. During the new tire's cycle, the valve may develop issues that are not easily noticeable. Therefore, it is best to replace the valve when changing tires. 3. Installation direction and inflation. If using the original factory tires, follow the manufacturer's installation requirements. For non-original tires, generally the side with the production date should face outward. If using directional tires, ensure the arrow on the wheel aligns with the direction of the car's forward movement during installation.

19

1

Share

Which engine oil is best for Sylphy maintenance?

Sylphy's original engine oil model is 5W30. According to the official maintenance recommendations, 5W30 oil of SL grade or above should be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, where 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The latter number represents the oil's kinematic viscosity at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in a Sylphy is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing; start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; use a special wrench to remove the oil filter; apply some oil to the seal of the new oil filter and tighten it clockwise by hand; add the new oil through the oil filler cap on the engine valve cover, usually filling about three-quarters of the oil container; start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter, and repair if necessary; after stopping the engine, pull out the oil dipstick to check that the engine oil level is within the standard range.

5

4

Share

At what tire pressure should a car not be driven?

Tire pressure should not be lower than 1.2 bar. Hazards of over-inflated tires: Reduced friction and adhesion of the tire, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates localized wear of the tread center pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts. Hazards of under-inflated tires: Increases friction with the road surface, raising fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in blowouts; increases tire body deformation, making the sidewalls prone to cracking and causing flexing movements that lead to excessive heat, accelerating rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area and accelerating shoulder wear.

17

5

Share

What should be paid attention to after picking up a new car?

After picking up a new car, the following aspects should be noted: 1. Small flaws in the car body paint can only be detected under sufficient light, so it is best to pick up the car in bright sunlight. Some 4S stores may have customers inspect the car indoors, but garages often have poor lighting, so be sure to move the car to a well-lit area for inspection. 2. Pay special attention to the gaps between the bumper and the car body, the door gaps, and the gaps between the front and rear bumpers. Open the doors to check if there is any color difference between the interior and exterior paint. Observe at an angle towards the sunlight and from multiple perspectives. A qualified paint surface should be smooth, free of orange peel or water ripple defects, and there should be no color difference in vulnerable areas such as the bumper and car body, door edges, and left and right exterior rearview mirrors. 3. For metallic and pearlescent paints, you can also judge by observing the uniformity of the aluminum powder or mica particles in the paint. It is important to note that if you are unsure whether some stains on the car are scratches, it is best to use a damp cloth to wipe them off, and avoid scratching with your fingers. 4. Check the lower right corner of the car windows for relevant markings. Only original factory glass will have these marks, preventing the glass from being replaced after leaving the factory.

11

0

Share

Why Did Honda Launch Three-Cylinder Cars?

Can a Second-hand Car Purchased in Another Location Be Licensed Locally?

How to Turn on the Fog Lights of Chevrolet Cavalier?

What tires does the Haval H7 use?

Which engine oil is best for Sylphy maintenance?

At what tire pressure should a car not be driven?

What should be paid attention to after picking up a new car?

How to Drive on Snowy and Icy Roads?

Can You Still Drive with the Audi Oil Yellow Light On?

What Are the Common Faults When an Angle Grinder Fails to Rotate?

Difference Between Part-Time 4WD and On-Demand 4WD? Which is Better?