···
Log in / Register

What tires does the Haval H7 use?

6Answers
SanSpencer
07/29/2025, 11:40:34 AM

Haval H7 is equipped with 235/55-R18 Kumho tires. Kumho Tires has a complete production line, covering passenger car tires, commercial vehicle tires, high-tech tires and other categories. Tires are one of the most important components of a car. Their main functions are to support the entire weight of the vehicle, bear the load of the car, and transmit forces and torques in other directions to deliver traction and braking torque, thereby improving the car's power performance, braking performance and passability. Notes for tire replacement: 1. Choose the right tires. The specifications of the new tires must be the same as the previous ones and must match the other tire on the same axle, such as speed rating, load index, tread pattern, brand, size, etc., to ensure safe driving. 2. The valve should also be replaced. This is because when replacing tires, the aging cycle of the new tire and the valve may differ. During the new tire's cycle, the valve may develop issues that are not easily noticeable. Therefore, it is best to replace the valve when changing tires. 3. Installation direction and inflation. If using the original factory tires, follow the manufacturer's installation requirements. For non-original tires, generally the side with the production date should face outward. If using directional tires, ensure the arrow on the wheel aligns with the direction of the car's forward movement during installation.

Was this review help?
119
Share
AdrianLee
08/14/2025, 11:08:27 PM

I've been driving a Haval H7 for several years. The original tires on this car are usually 17-inch 225/65 R17, commonly from the brand Goodyear EfficientGrip, specifically designed for SUVs with good traction. I remember when I first bought it, the tires were very stable on the highway and didn't slip even in rainy conditions. However, after two years of use, the wear became noticeably worse, so I had to regularly check the tire pressure and tread depth. When I replaced the tires later, I chose Michelin, which had the same size but offered slightly better comfort. As an owner, I recommend not opting for cheap no-name brands because tires directly affect driving experience and safety. Getting a tire rotation at a repair shop every six months can extend their lifespan, especially if you frequently drive on mountain roads.

Was this review help?
17
Share
Expand All
SanJonathan
10/11/2025, 11:13:17 PM

As a car enthusiast, I'm quite familiar with the standard configuration of the Haval H7. It comes factory-equipped with Goodyear or Continental all-season tires in size 225/65 R17, a common SUV tire size where 45 indicates the aspect ratio and R17 means 17-inch rim diameter. These tires balance durability and quietness, suitable for urban off-roading, but upgrading to performance tires like Michelin Latitude can enhance grip. Tire selection depends on seasons: regular all-season tires suffice for summer, while winter tires are recommended for northern winters. Based on my tests, the original tires last about 40,000 km. For maintenance, check tire pressure monthly, maintaining around the recommended 2.4 BAR to prevent blowout risks.

Was this review help?
14
Share
Expand All
HaleyFitz
11/24/2025, 11:16:36 PM

During routine maintenance, the tires of the Haval H7 are crucial. The factory usually equips it with 225/65 R17 all-season tires from the Goodyear brand. I recommend that owners regularly check tire wear and pressure: use a coin to test the tread depth—if the top of the coin becomes visible, it's time to replace them. Low tire pressure increases fuel consumption, while excessive pressure raises the risk of a blowout. The original tires can last 3-5 years, but they are prone to damage on gravel roads or rough terrain. Promptly removing debris from the tread grooves can extend their lifespan. During maintenance, don’t forget to schedule a professional wheel alignment every 6 months to ensure safe driving.

Was this review help?
11
Share
Expand All
NicoleRose
01/15/2026, 12:48:33 AM

Safety first, the Haval H7 is typically equipped with 225/65 R17 tires, mostly from the Goodyear brand. Tires have a significant impact on driving safety: shallow treads can easily lead to loss of control in rainy weather. It is recommended to check tire pressure monthly with a pressure gauge, maintaining the standard value of 2.4 BAR. The original tires are all-season designed, suitable for general weather conditions, but switching to winter tires or wet-weather tires is more reliable during extreme cold in the north or rainy seasons. Rotate the tires regularly every 5,000 kilometers to ensure even wear and reduce the risk of blowouts. I emphasize safe driving habits: drive slowly on slippery roads, avoid sudden braking, and ensure good tires to safeguard your journey.

Was this review help?
12
Share
Expand All
MacPreston
04/11/2026, 03:29:25 AM

Tire knowledge is simple: The Haval H7 commonly uses 225/65 R17 size tires, such as Goodyear, with 17-inch rim size. The 65 aspect ratio makes it durable and comfortable. This size is suitable for SUVs, balancing off-road capability and economy. Consider road conditions when choosing: use all-season tires in the city for fuel efficiency, and opt for thicker tires when off-roading for better impact resistance. Do not exceed the original tire size when replacing, as it may affect suspension lifespan. Develop good habits: visually inspect tires for cracks every two weeks, and check tire pressure before highway driving. Personally, I prefer domestic brands like Chaoyang for their cost-effectiveness, but ensure they have quality certifications.

Was this review help?
5
Share
Expand All
More Q&A

How Long After Windshield Replacement Can You Apply Tint Film?

You need to wait two to three days before applying the tint film. Tinting recommendation - dry heating: Heat horizontally as it's easier. Use minimal water on the film. Allow more shrinkage on areas with larger curves and less on areas with smaller curves - that's the principle. However, note that the heat gun temperature shouldn't be too low. If it's too low, the film may become over-cured and difficult to shrink. Applying water before tinting: This helps prevent small bubbles. If bubbles form during interior application, you'd need to use a heat gun. But since car interiors contain trim materials, the hundreds of degrees from the heat gun could cause issues. It's better to handle everything on the exterior to minimize problems. Be extremely careful not to damage the windshield - remember to use gentle pressure. Surprisingly, dull knives are more likely to damage glass.
104
Share

How often should car tires be inflated?

Regularly (at least once a month) check the air pressure of all tires, including the spare tire, when they are cold. The correct inflation pressure for tires in a cold state should be based on the parameters recommended by the vehicle manufacturer. Tire lifespan: The wear lifespan of tires is between 30,000 to 50,000 kilometers. If the tires have not reached the wear limit or mileage but have been in use for 5 years or show significant cracks on the sidewalls, they should be replaced. Tire material: The main component of tires is rubber. The maximum storage and anti-aging time for rubber, from natural latex to ethylene propylene and nitrile, does not exceed 10 years. The average service life for various rubber products in use is 3-5 years.
120
Share

What to Do When the Tire Pressure Monitoring Light Comes On?

Tire pressure warning light on the processing method is: 1. First, pull over and check the tire pressure of all four tires. If no obvious deflation is visible to the naked eye, you can reset the tire pressure system after getting back in the car to turn off the warning light; 2. If the tire pressure warning light comes on again, it indicates that the tire pressure of a certain tire indeed has a problem, and it needs to be checked and repaired promptly. Reasons for the car tire pressure warning light to come on: 1. Tire puncture; 2. Excessive tire pressure; 3. Driving with low tire pressure for too long; 4. Faulty tire pressure sensor; 5. Low tire pressure due to prolonged lack of inflation. Installing a tire pressure monitoring alarm in the car can prevent accidents caused by abnormal tire pressure.
117
Share

Which Type of Transmission Offers Better Overall Performance?

MT transmissions perform well overall, but they are not automatic and have poorer shift comfort. Theoretically, the best is the dual MT clutch DCT, which retains the advantages of MT transmissions while shifting like a dry DCT, with no drawbacks, making it the theoretically best DCT transmission. In the past, dry DCTs couldn't handle high torque, and when clutch reliability issues weren't a concern, they could be called the "endpoint of transmissions." Theoretically, dual AMT-style DCTs can handle high torque, and the dual MT clutches used are highly reliable, with overall performance surpassing the "endpoint of transmissions." The dual AMT-style dual-clutch solves the issues of low-speed shift jerkiness, vibration, and noise in DCTs. The reason for jerkiness in DCTs is insufficient clutch slip power and slow clutch engagement speed—neither of which is an issue for MT clutches, so dual AMT shifts can be smooth. DCT vibration occurs because the drivetrain's resonant frequency isn't low enough, which is due to the clutch's secondary mass being insufficient. The combined mass of the two MT clutches in a dual AMT is large, resulting in a sufficiently low drivetrain resonant frequency, preventing vibration during startup and low RPMs. DCT noise is caused by synchronizer gear clash, as wet clutches don't fully disengage, making synchronizer clash more likely. The dry MT clutches in dual AMTs fully disengage, preventing synchronizer noise, and the normally closed MT clutches avoid clutch collision noise. The dual AMT-style dual-clutch has no jerkiness, vibration, or noise and can handle high torque, theoretically making it the "endpoint of transmissions."
104
Share

Are the Three Major Components of Lynk & Co from Volvo?

Lynk & Co's three major components do not belong to Volvo, but the engines used by Lynk & Co incorporate Volvo's technology. Lynk & Co is a brand under Geely, offering both sedan and SUV models. The sedan model is the 03, while the SUVs include the 01, 02, 05, and 06, among others. The 03 is a compact sedan with dimensions of 4639mm in length, 1840mm in width, 1472mm in height, and a wheelbase of 2730mm. More details are as follows: 1. Engine: The Lynk & Co 03 utilizes three types of engines: a low-power version 1.5L turbocharged engine, a high-power version 1.5L turbocharged engine, and a 2.0L turbocharged engine. 2. Configuration: The front suspension of the Lynk & Co 03 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The multi-link independent suspension enhances the vehicle's handling and ride comfort.
117
Share

Where Are the Eight Production Bases of Changan Automobile Located?

Changan Automobile's eight production bases are located in Chongqing, Heilongjiang, Hebei, Guangdong, Jiangxi, Jiangsu, Anhui, and Zhejiang. Currently, the main production base of Changan Automobile is in Chongqing, and the company has several subsidiaries, such as 'Changan Automobile Co., Ltd.' and 'Changan Ford Automobile Co., Ltd.' Below is an introduction to Changan Automobile: 1. R&D Structure: Chongqing Changan Automobile Co., Ltd., referred to as Changan Automobile, has established a global collaborative R&D structure with a focus on different regions in Chongqing, Beijing, Hebei, Hefei, Turin (Italy), Yokohama (Japan), Birmingham (UK), Detroit (USA), and Munich (Germany), known as the 'Six Countries, Nine Locations.' In 2014, Changan's Chinese brand vehicles achieved cumulative production and sales exceeding 10 million units, becoming the first Chinese brand to enter the 'Ten Million Club.' In April 2018, Changan Automobile officially announced its Third Entrepreneurship-Innovation and Entrepreneurship Plan, aiming to transform into a world-class smart mobility technology company. 2. R&D Center: Changan Automobile's Global R&D Center is located in Yufu Industrial Park, Liangjiang New Area, Chongqing, and was officially put into use on April 9, 2019. Covering an area of over 1,000 acres with a total investment of 4.3 billion yuan, the Global R&D Center is an open and shared smart R&D platform integrating global resources. It features seven major functions, including design, testing, and management, covering 12 major fields such as simulation analysis, noise and vibration, and collision safety. It also includes 180 laboratories for hybrid power, air conditioning systems, non-metallic materials, and more, along with a global data center built using cloud technology.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.