Why can't the sunroof of the Qashqai be opened?

2 Answers
DelValentina
07/29/25 2:57am
Reasons why the Qashqai's sunroof cannot be opened: 1. The sunroof track is stuck. 2. The electric actuator is damaged. The car sunroof is installed on the roof, which can effectively circulate the air inside the car and increase the intake of fresh air. At the same time, the car sunroof can also broaden the field of vision and meet the shooting needs of mobile photography. The following is information about the Qashqai: The Qashqai is a compact SUV under Nissan, equipped with a 2.0-liter naturally aspirated engine. The engine code is MR20, with a maximum power of 154 horsepower and a maximum torque of 204 Nm. The maximum power is output at 6000 rpm, and the maximum torque is output at 4400 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is matched with a 7-speed CVT transmission.
Was this review help?
18
0
Share
Shelby
08/12/25 6:51am
Last time my Qashqai's sunroof also got stuck, and after struggling for a while, I found leaves jammed in the sliding rails. This car's sunroof tracks are particularly prone to accumulating dirt, especially for vehicles parked under trees. Rainwater mixed with tree sap flows into the tracks during rainy days, and once dried, it glues the sliding rails shut. When pressing the switch, the motor would hum but not move. Later, I sprayed WD40 into the rail gaps and spent half an hour cleaning with a stiff card to get it clear. If there's no response at all, check the fuse box near the driver's left foot—the F34 15A fuse specifically controls the sunroof. By the way, the Qashqai's sunroof initialization often loses settings; try resetting by holding the close button for 15 seconds. If that doesn’t work, head to the 4S店 to check the motor immediately.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What Does the Model Number of a Car Battery Represent?

Car battery model numbers represent the voltage and current values of the battery. Car batteries, also known as storage batteries, are categorized into conventional batteries, dry-charged batteries, and maintenance-free batteries. The working principle of a battery is to convert chemical energy into electrical energy. Methods for maintaining a car battery include: 1. Minimize the use of electrical devices in the car after turning off the engine; 2. Start the car periodically if it is not used for an extended period; 3. Regularly clean the dust and oil from the battery terminals and apply special grease to protect the wiring harness; 4. Inspect the car battery through the observation hole on the battery and replace it periodically; 5. Regularly check the accessories and connecting wires on the battery.
17
5
Share

What Liquids Are Most Damaging to Car Paint?

Car paint is most vulnerable to strong acidic or alkaline substances such as toilet cleaners and high-efficiency kitchen cleaners. Initially, the paint will lose its luster and gradually corrode, and in severe cases, it may even corrode the car's body. Depending on the extent of the corrosion, the following strategies can be adopted: 1. Waxing: First, polish and wax the affected area. 2. Repainting: If polishing doesn't resolve the issue, consider repainting. 3. Rust Prevention: If the corrosion hasn't discolored or after repainting, ensure proper rust prevention. 4. Proactive Rust Prevention: Taking preventive measures can avoid such difficult-to-handle situations. 5. Electronic Rust Prevention: If possible, consider trying electronic rust prevention methods.
17
4
Share

How to Turn on the Low Beam Headlights on the Lavida?

To turn on the low beam headlights of the Lavida: On the left side of the steering wheel, there is a set of light combination switches. Rotating the combination switch forward one notch turns on the dashboard lights, and rotating it another notch turns on the low beam headlights. Taking the Lavida 2021 model as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm, wheelbase 2688mm, fuel tank capacity 51l, and luggage compartment capacity 510l. The Lavida 2021 is equipped with a 1.4t turbocharged engine, with a maximum power of 110kw and a maximum torque of 250nm, matched with a 7-speed dual-clutch transmission.
2
3
Share

What four-wheel drive system does the Touareg use?

Touareg uses the 4Motion four-wheel drive system. The four-wheel drive systems on Volkswagen SUV models are mainly divided into two types, namely 4Motion and 4xMotion. The 4Motion four-wheel drive system is used in the current Volkswagen Tiguan and Touareg. The 4xMotion four-wheel drive system was the standard four-wheel drive system for the first-generation Touareg four-wheel drive models, belonging to the older version of the four-wheel drive system. This four-wheel drive system is very similar to Porsche's PTM system, with a transfer case equipped with a multi-plate clutch installed behind the output shaft of the transmission, and the multi-plate clutch is used to lock the central differential. The Touareg is an SUV launched by Volkswagen in Germany, with a wide chrome grille and rectangular air intake grille reflecting the tradition of the Volkswagen family, while the front headlights exude understated luxury.
9
0
Share

How to Use Automotive Clay Bar?

Automotive clay bar is used as follows: 1. Rinse the car body with clean water to remove surface dirt; 2. Knead the clay bar properly before use; 3. Evenly spray clean water or lubricant on the cleaning area, the clay bar, and your hands; 4. Move the clay bar back and forth in straight lines over the cleaning area with your hand until the area feels smooth without particles; 5. After cleaning, wipe the area with a clean towel. Automotive clay bar, also known as detailing clay, has decontamination functions without damaging the car's paint surface. Its purpose is to remove overspray, rust, bird droppings, oil stains, and small black spots from the car body surface.
6
5
Share

Where does the hole at the base of the wiper lead to?

The hole at the base of the wiper leads to the exterior of the car. Here is an introduction about the wiper: 1. Introduction: The wiper is an important accessory installed on the windshield, and its function is to remove rain, snow, and dust that obstruct the view on the windshield glass. 2. Working principle: The motor on the electric wiper drives the output shaft through the worm gear on the armature shaft and drives the output gear through the idler gear and idler shaft. The output arm connected to the wiper linkage is then operated by the output shaft. When the motor rotates, the output arm and linkage are driven to move back and forth. The resistor on the control switch is connected to the motor's armature winding to control the motor's speed. The driver can turn the switch as needed to allow current to flow into the motor's input circuit.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.