Why can't the Changan CS55 start?

2 Answers
McAnthony
08/27/25 5:25am
Changan CS55 failing to start may be due to incorrect gear position, dead battery, or issues with the vehicle's ignition system. Changan CS55: The Changan CS55 is an automobile, an SUV model released by Changan Automobile in 2017. The launch of the Changan CS55 not only completed Changan Automobile's SUV product lineup but also strengthened its competitiveness in the compact SUV market, holding significant strategic importance for Changan Automobile. Interior: In terms of interior design, the Changan CS55 follows a "refined" approach, featuring a three-spoke steering wheel and a symmetrical center console. The air vents, center control area, and red decorative strips on both sides of the center console exhibit "individualistic" characteristics. The seats of the new car adopt a red and black color scheme, catering to the sporty preferences of young consumers.
Was this review help?
11
4
Share
DiMila
09/09/25 4:24am
I've handled quite a few cases where the CS55 wouldn't start, with the most common issue being a dead battery. After three to five years of use, batteries tend to age, especially making cold starts more difficult in winter. If the dashboard lights are particularly dim or completely unresponsive when you turn the key, it's highly likely the battery needs replacing. Another scenario is when the starter makes a clicking sound but the engine doesn't turn over, which could indicate a faulty starter relay. I've encountered cases where owners installed additional electrical components causing current leakage, draining the battery completely after locking the car. As an emergency measure, you can try jump-starting the car, but if it still won't start after that, you should check the fuel pump fuse (a 15A blue fuse labeled FUEL in the engine compartment fuse box). If these basic checks don't resolve the issue, then you'll need to inspect the crankshaft position sensor—if it's faulty, the engine control unit won't be able to detect the engine's position at all.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

Can You Start the Engine in P Gear for an Automatic Transmission?

You can start the engine in P gear for an automatic transmission. Starting in P gear and passing through R gear without stopping will not cause damage to the transmission. An automatic transmission refers to a car's automatic gear-shifting mechanism, where the control system of the automatic transmission selects the appropriate gear based on the engine's speed and load during driving, eliminating the need for the driver to manually shift gears. The gears for an automatic transmission car are as follows: 1. P gear stands for Parking and Starting gear. When the gear is in this position, the wheels are mechanically locked to prevent rolling; 2. R gear stands for Reverse gear, used when reversing; 3. N gear stands for Neutral gear, used for temporary parking. To prevent the vehicle from rolling on a slope, it is important to step on the brake when using this gear; 4. D gear stands for Drive gear, used when the vehicle is moving forward; 5. L gear stands for Low gear, used when going downhill or descending a long slope. Engaging this gear allows the use of engine power for braking, avoiding the danger of overheating brake pads due to prolonged braking; 6. S gear stands for Sport mode, allowing free gear switching when engaged.
13
0
Share

How to Deal with Wax Marks Left by Polishing?

Spray a small amount of adhesive remover onto a clean cloth. Use the cloth with adhesive remover to wipe the areas with wax residue, applying slight pressure during the process. Rinse thoroughly with clean water. After the first rinse, use deionized water for the second wash. After the first wash, spin dry with a spin dryer, then use deionized water for the second rinse.
8
5
Share

What to do if the headlights of Sagitar get water inside and fog up?

For relatively minor cases of moisture or water ingress inside the headlights, the fogging will usually dissipate as the heat from the headlights causes the moisture to evaporate and exit through the vent tube after the headlights have been on for a while. In cases of severe moisture or water ingress, the headlight assembly should be removed, the lens opened, and allowed to dry. After drying, inspect the condition of the headlight surface.
4
2
Share

How to Set the Seat Memory Function in Passat Lingyu?

Turn on the ignition switch; Press down the red "Memory-Off" button; Adjust the driver's seat and exterior mirrors to the most comfortable position, then press and hold one of the memory buttons on the left side of the driver's seat; Turn off the ignition switch and remove the ignition key, press and hold the unlock button on the key until you hear a "dong" confirmation sound indicating the setup is complete.
17
4
Share

How to Disable the Anti-Theft System When the GL8 Won't Start?

Use the reset button on the odometer to set the first digit to any number between 0 and 9. Press the odometer reset button to set the second digit of the password, then press the odometer reset button again to set the third digit of the password. Pull out the clock adjustment button on the instrument cluster while pressing the daily odometer reset button.
18
5
Share

How to Remove Car Paint from Plastic?

To remove car spray paint, you can use some solutions that have the effect of diluting the paint. If the car spray paint still cannot be removed, gasoline will be needed. First, apply gasoline to the affected area, and then wash it with soapy water.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.