Who needs to sign for vehicle damage assessment?

1 Answers
Brad
07/29/25 11:09pm
Requires the vehicle owner's signature. Below are the specific details regarding the relevant content: Conditions: Vehicle damage assessment is a relatively complex matter. The vehicle owner must clearly understand the process of vehicle damage assessment to minimize accident losses and avoid unnecessary expenses. Vehicle insurance damage assessment is a key part of the claims process. Although it is not the responsibility of the vehicle owner, the owner must still be familiar with the process to better handle such incidents. The process of vehicle insurance damage assessment: Immediately after a traffic accident occurs, it is necessary to report to the traffic police to determine accident liability. At the same time, the insurance company will conduct an on-site investigation, then assess the damaged vehicle and proceed with repairs, and finally issue an invoice for the claim. Repairs: Additionally, the vehicle owner needs to be aware that the damage assessment and repairs must be carried out at the same location. In other words, if the initial agreement with the surveyor was to follow the repair method of a 4S shop, subsequent matters must also be handled at the 4S shop. This is because the insurance company reassesses the loss amount based on the standards of the repair shop actually chosen by the customer. If the locations differ, it may likely result in unnecessary financial burdens.
Was this review help?
15
5
Share
More Forum Discussions

What model is the Changan Honor?

Changan Honor is a micro van under the Changan brand, with a wheelbase of 2750mm, a body length of 4450mm, width of 1680mm, and height of 1810mm. The vehicle is equipped with two engines: one is a 1.3-liter naturally aspirated engine, and the other is a 1.5-liter naturally aspirated engine. The 1.3-liter naturally aspirated engine delivers 92 horsepower and a maximum torque of 120 Nm, featuring multi-point fuel injection technology, and uses an aluminum cylinder head and cast iron cylinder block. It is paired with a 5-speed manual transmission. The 1.5-liter naturally aspirated engine produces 107 horsepower and a maximum torque of 145 Nm, with the maximum torque achieved between 3500 to 4500 rpm and the maximum power at 5500 rpm.
10
5
Share

Can You Sleep in the Car with the Heater On in Winter?

It is possible to sleep in the car with the heater on for a short time in winter. However, the following preparations are necessary: 1. Your vehicle should be parked in an open, unobstructed, and well-ventilated area. It is important to note that the vehicle should not be parked in a tightly sealed garage. While the engine is idling and the heater is on, switch the heater's internal circulation mode to external circulation mode. Although this operation will significantly reduce the indoor heating temperature, it allows the exchange of stale air inside the car with fresh air from outside, maintaining a certain oxygen level inside the vehicle. This prevents difficulty breathing or shock due to insufficient oxygen while sleeping. 2. Lower the driver's side window and the passenger side window by 1 cm each. This provides dual protection, ensuring that the air inside the car remains in a circulating state.
12
1
Share

Should You Release the Handbrake or Shift Gear First When Driving?

Start by shifting into gear, then release the handbrake last. Reasons for shifting into gear before releasing the handbrake: 1. To ensure the vehicle does not move and avoid unnecessary trouble, such as rolling on a slope. 2. To prevent shifting into the wrong gear, which could cause the vehicle to lose control or roll backward. This is similar to the principle of pulling the handbrake first and then shifting to neutral when parking. 3. For safety considerations. In practice, under normal road conditions, releasing the handbrake first and then shifting into gear has little impact on starting, and the vehicle will not fail to start just because the handbrake was released first. Steps for starting a motor vehicle: 1. Press the clutch, followed by the brake. 2. Use the right hand to shift into first gear. 3. Release the brake. 4. Slowly lift the clutch and gently press the accelerator.
20
4
Share

What are the differences between Changan Kuayue Wang X3 and X5?

Differences between Changan Kuayue Wang X3 and X5: 1. Different engines: The Changan Kuayue Wang X3 is equipped with a 1.3L naturally aspirated engine; the Changan Kuayue Wang X5 uses a 1.5L naturally aspirated engine. 2. Different body dimensions: The Changan Kuayue Wang X3 measures 5295mm in length, 1730mm in width, and 2070mm in height; the Changan Kuayue Wang X5 measures 5445mm in length, 1780mm in width, and 2075mm in height. 3. Different rated load capacities: The Changan Kuayue Wang X3 has a rated load capacity of 0.735 tons; the Changan Kuayue Wang X5 has a rated load capacity of 1.49 tons. 4. Different cargo box lengths: The Changan Kuayue Wang X3 has a cargo box length of 3.2 meters; the Changan Kuayue Wang X5 has a cargo box length of 2.55 meters.
19
2
Share

What colors are available for the Changan Benben Mini?

The Changan Benben Mini comes in six colors: Cyclone Orange, Miracle Yellow, Elf Purple, Snowman White, Crystal Red, and Elite Gray. The Changan Benben Mini is a compact and cute microcar with body dimensions of 3580 mm in length, 1570 mm in width, and 1490 mm in height, and a wheelbase of 2345 mm. It is equipped with a 1.0-liter four-cylinder naturally aspirated engine across the lineup. This engine features multi-point fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. Although the cast iron cylinder block is relatively heavy, it can withstand higher temperatures and pressures, resulting in better reliability and durability. The engine is paired with either a 5-speed manual transmission or a 5-speed AMT transmission. The AMT transmission's control mechanism can manage gear shifting as well as the engagement and disengagement of the clutch.
2
4
Share

How to Replace the Wiper Blades on a Volkswagen CC?

Here is the method for replacing the wiper blades: 1. Fold the wiper arm of the car. 2. Press the middle of the wiper blade to fix it at the small black square. 3. Then slide the wiper blade to the right to remove it. Below is some information about the Volkswagen CC: 1. The Volkswagen CC is a coupe model under the Volkswagen brand. The car's exterior continues Volkswagen's design language, maintaining a business-like texture while perfectly combining the flexibility and stability of a sedan with the performance of a sports car. It features leather sports seats and a leather sports steering wheel, showcasing the luxurious characteristics of the car's interior. Additionally, it is equipped with high-tech configurations to provide drivers with a convenient and comfortable driving experience. 2. The Volkswagen CC uses Michelin PS3 series tires, which offer excellent sports performance. The car's interior adopts a sporty style, continuing the design language of Volkswagen's high-end business sedan models, with striking color combinations.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.