···
Log in / Register

Who is at fault when a right-turning vehicle scrapes against a straight-going vehicle?

1Answers
NolanRose
07/25/2025, 02:23:36 AM

A right-turning vehicle is at fault when it scrapes against a straight-going vehicle. If there are traffic signals, traffic signs, or markings at the intersection, or if there is a traffic police officer directing traffic, the party that violates the traffic signals or the officer's instructions is usually held responsible for the accident. When a motor vehicle passes through an intersection without traffic signals, police direction, or any traffic signs or markings, it should stop and observe before entering the intersection. The following right-of-way rules should then be followed to determine priority: 1. Yield to vehicles coming from the right; 2. Turning motor vehicles must yield to straight-going motor vehicles; 3. For vehicles traveling in opposite directions, right-turning vehicles must yield to left-turning vehicles.

Was this review help?
103
Share
More Q&A

What is the Real Purpose of a Car Sunroof?

Car sunroofs serve several functions including rapid cooling, defogging, and quick air exchange. Additional details are as follows: 1. Rapid Cooling: If your car is parked under direct sunlight, especially in summer, the interior temperature can easily exceed 60℃. Many drivers instinctively turn on the air conditioning upon entering the car. However, the more effective approach is to first open the windows and sunroof while driving, which quickly draws out the hot air and achieves cooling. This method cools the car about three times faster than using the air conditioning alone and also saves fuel. 2. Defogging: During seasons with significant temperature variations, if the side windows are closed while driving, the windshield is prone to fogging up. Opening the sunroof for a few minutes can quickly eliminate the fog. 3. Quick Air Exchange: Opening the sunroof while driving rapidly increases air circulation inside the car, thereby improving ventilation and air exchange within the cabin.
110
Share

What are the differences between the new Passat Elite and Luxury editions?

The differences between the new Passat Elite and Luxury editions: 1. Different engines: The new Passat Elite edition is equipped with a 4-cylinder 1.4T 150-horsepower engine with an aluminum alloy cylinder block; the new Passat Luxury edition is equipped with a 4-cylinder 2.0T 186-horsepower engine with a cast iron cylinder block. 2. Different curb weights: The new Passat Elite edition weighs 1470 kg; the new Passat Luxury edition weighs 1575 kg. 3. Different tire specifications: The front and rear tires of the new Passat Elite edition are sized 215/55R17; the front and rear tires of the new Passat Luxury edition are sized 235/45R18. 4. Different active and passive safety features: The new Passat Elite edition lacks lane change assist and active brake active safety systems; the new Passat Luxury edition is equipped with lane change assist and active brake active safety systems.
108
Share

Is the fuel tank cap of a Mercedes-Benz on the left or right side?

On the right side. The fuel tank cap switch of a Mercedes-Benz is generally linked to the car door. When the door is opened, the fuel tank cap automatically unlocks, and pressing the fuel tank cap switch will pop it open. Below are specific details on cleaning the fuel tank: Regular Cleaning: A sealed fuel tank can accumulate a lot of gum, sludge, particulate matter, and foil. Many substances in the fuel require regular cleaning to prevent excessive impurities from causing malfunctions. Effects of Long-Term Neglect: Excessive deposits of impurities and water at the bottom of the fuel tank can clog the ventilation pipes and fuel lines, creating negative pressure inside the tank. This leads to poor fuel supply, sluggish throttle response, and reduced vehicle performance. If the fuel level is too low or insufficient at this time, it is essential to refuel immediately—do not wait until the warning light comes on. If the fuel pump continues to operate under these conditions, it may overheat, affecting its lifespan, and in severe cases, could even cause the pump to burn out.
120
Share

What Causes Engine Vibration at 1000 RPM in a BMW X3?

Possible causes of engine vibration at 1000 RPM in a BMW X3 include a dirty air filter, worn spark plugs, low idle speed, abnormal water temperature, carbon deposits, oil sludge blockage, and low cylinder pressure. Dirty Air Filter: The air filter is designed to protect the engine and reduce wear. It should typically be replaced every 10,000 kilometers. If not replaced in time, insufficient air intake can lead to a lower idle speed, causing engine vibration. Replacing the filter element can resolve this issue. Spark Plug Lifespan: Spark plugs have a limited lifespan. After 30,000 to 40,000 kilometers, their ignition efficiency significantly decreases, which can affect ignition. This is one of the most common issues, and replacing all the spark plugs can fix the problem. Low Idle Speed: The engine's idle speed is preset in the computer. When the RPM drops below a certain range, the car's computer will automatically adjust it. If the idle speed is too low and causes vibration, it indicates that it has exceeded the computer's control range. Abnormal Water Temperature: The engine operates within a specific temperature range. High water temperature can lead to advanced ignition timing, altered air-fuel mixture, thinning of engine oil viscosity, and reduced lubrication performance. Common causes include insufficient coolant, a malfunctioning thermostat, a non-functioning fan, or inaccurate temperature control switch settings. Addressing these issues can resolve the vibration. Carbon Deposits and Oil Sludge Blockage: Over time, carbon deposits and oil sludge can accumulate in the throttle body, idle valve, and intake ports, causing blockages and uneven air intake. This can lead to unstable idle speed and engine vibration.
108
Share

Is the Outback a four-wheel drive vehicle?

The Outback is a four-wheel drive vehicle. Here are some introductions about this car: 1. Power. It is equipped with the FB25 2.5L naturally aspirated horizontally opposed four-cylinder engine, with a maximum power of 129kW (175PS) and a peak torque of 235N·m. The transmission system is matched with a CVT gearbox and equipped with the Symmetrical AWD full-time four-wheel drive system. 2. Interior. The green stitching treatment adds vitality to the black interior, and the fabric seats are also waterproofed, largely solving the hard problem of fabric being easily dirty. 3. Exterior. It adopts the exclusive exterior kit of this model, including blackened front grille + exterior rearview mirrors + side skirts, 18-inch double five-spoke black wheels, uniquely shaped black roof rails, fluorescent green side skirt logos, and black rear logos, etc. Thanks to this, the new car has a more aggressive appearance than ordinary models. 4. Body color. The car provides three paint options: Crystal Pearl White, Pearl Jewel Black, and Wilderness Turquoise Green.
111
Share

How to reset the tire pressure warning light on an Audi Q5?

Audi Q5 tire pressure indicator reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Solutions for insufficient tire pressure: If no visible damage is found, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found upon inspection, drive to a tire repair shop promptly for a patch, then reinflate the tire; If the tire pressure warning reappears after some time of inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and tendencies to veer off course, among other factors detrimental to driving safety.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.