Which Volkswagen model is the Sharan 2.0TSI?

2 Answers
SophieAnn
08/27/25 8:44am
Volkswagen Sharan is the Volkswagen Sharan model. The Sharan is a 5-door, 7-seater MPV. Since the full production of the first-generation Sharan in 1996, it has consistently held the position of the best-selling MPV in the German market. Across the entire European market, the Sharan has also ranked among the top three in sales within its class. Regarding body dimensions: The body dimensions are 4854 millimeters in length, 1904 millimeters in width, and 1740 millimeters in height, with a wheelbase of 2920 millimeters. Regarding powertrain: The Sharan is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kilowatts at 5000 to 6000 revolutions per minute, and a maximum torque of 250 Newton-meters at 1500 to 3500 revolutions per minute.
Was this review help?
16
4
Share
SanDakota
09/09/25 7:24am
I remember the Volkswagen Sharan 2.0 TSI is a versatile car perfect for family trips. Every time I drive it, I find the space incredibly comfortable. It has 7 seats, and the trunk is spacious enough for all the family's luggage. The rear seats can also be folded, which is very practical. The 2.0 TSI engine runs smoothly, with ample power and good fuel efficiency, averaging about 8 liters per 100 kilometers. It's also quiet on long drives. The safety features are decent too, with standard ABS and airbags, making it very reassuring when driving with kids. Compared to other MPVs, it handles more stably, but the turning radius is a bit large, so you need to be careful in parking lots. Overall, this car is my top choice as a family user—both practical and reliable.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

How many points are deducted for not using the turn signal during a right-angle turn?

Not using the turn signal during a right-angle turn results in a deduction of 10 points. The regulations for using turn signals on motor vehicles are as follows: 1. The left turn signal should be activated in advance when turning left, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn; 2. The right turn signal should be activated in advance when turning right, changing lanes to the right, returning to the original lane after overtaking, or parking by the roadside. The correct methods for using turn signals include: 1. Activating the left turn signal when entering a highway; 2. Activating the right turn signal when exiting a highway; 3. Activating the left turn signal when merging from an auxiliary road onto a main road; 4. Activating the right turn signal when transitioning from a main road to an auxiliary road.
10
5
Share

What is the reason for the clicking sound when the Prado is in D gear at idle?

Prado making a clicking sound when in D gear at idle may be an issue with the idle speed. Introduction to D gear: The D gear in a car is the drive gear, also known as the forward gear, and is the most commonly used gear. When driving normally, the gear selector is placed in the D gear position, and the automatic transmission automatically shifts between gears based on the throttle input. The D gear is located in the middle-rear position of the gear shift console, behind the N gear, and its purpose is to enable the car to automatically select the appropriate gear while moving forward. Main purpose of D gear: When the vehicle is moving forward, the D gear allows the transmission's computer and corresponding mechanical structures to work together to automatically select the appropriate gear in real-time, eliminating the need for manual shifting. This greatly reduces the workload on the driver's hands and feet, improving driving convenience, ease, and comfort.
16
4
Share

What is the reason for the BMW 3 Series ambient light not working?

BMW 3 Series ambient light not working may be due to the dashboard brightness being set too low or a functional abnormality. Introduction to ambient lights: Ambient lights, also known as LED ambient lights, are light sources that create an atmosphere inside the car, enhancing its visual appeal and overall premium feel. They provide some degree of illumination but are primarily decorative. The ambient lights in different trim levels may vary, mainly in terms of coverage area and effects. The ambient lights are typically located near the footwell, center console, door armrests, and other areas. Model introduction: The black anti-scratch strips and waistline on the front and sides of the BMW 3 Series do not give a low-end feel despite the difference in materials. On the contrary, they further segment and elongate the already sleek body, making it more dynamic.
11
2
Share

What is the reason why the fuel tank cap of Volkswagen Tiguan L cannot be opened?

Reasons why the fuel tank cap of Volkswagen Tiguan L cannot be opened: Wire or motor issue: Some car fuel tank caps come with a locking motor, while others use a wire. If it's a wire, you need to check if the wire is broken. If it's a motor, you need to check if the motor is functioning properly. Incorrect method of opening the fuel tank cap: Car fuel tank caps are divided into inner and outer caps. The inner cap is the sealing cap of the fuel tank and can be opened by turning it counterclockwise. The outer cap is an anti-theft cap, which may have a lock or a mechanism lock. If it has a lock, it can only be opened with a key. If you still can't open it, it is likely that the wire of the fuel tank cap is faulty, and you will have to go to a 4S store for inspection and repair.
11
0
Share

What Causes Jerking When Accelerating in Second and Third Gears with a Manual Transmission?

The reason for jerking when accelerating in second and third gears with a manual transmission is due to issues such as transmission blockage. Below are the specific causes of jerking when accelerating in second and third gears with a manual transmission: 1. Damaged Solenoid Valve: A damaged solenoid valve is a significant cause of jerking. A simple way to distinguish this is that if it occurs occasionally without a discernible pattern, it is irregular. If it happens consistently when reaching a certain speed or shifting to a specific gear (e.g., from 2nd to 3rd gear), it indicates a fixed jerking issue. 2. Transmission Blockage: If there is sludge blocking the oil passages in the transmission's internal circulation, it can lead to stumbling issues. This can cause a series of transmission problems such as overheating, impact, and slipping, resulting in jerking during gear shifts.
11
5
Share

Where Does Water Entering a Car Cause It to Stall?

Water entering the cylinders of a car can cause it to stall. In gasoline-powered vehicles, the cylinders rely on the spark from the spark plugs to ignite highly atomized gasoline for combustion. If water enters, it can easily extinguish the flame. Here are several methods to handle a car stalling due to water ingress: 1. Tow the car to a dry area: Push the car to a higher ground without water accumulation to prevent excessive water from entering the engine. 2. Call for help: Contact your insurance company and have the car towed to a repair shop to check the extent of water damage. 3. Engine: After the car stalls due to water ingress, do not attempt to forcibly restart the engine. When the engine is stalled by water, the cylinders are likely already filled with water. Since water is incompressible, the pistons have almost no room to move upward. At this point, even if the ignition switch is turned on, the starter will not be able to turn, potentially leading to major engine repairs or even complete engine failure.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.