Which Vehicles Have Greater Wading Depth?

1 Answers
Caroline
07/25/25 7:14am
Generally, off-road vehicles have greater wading depth. Here is additional information: 1. Maximum Wading Depth: Maximum wading depth is one of the important indicators for evaluating a vehicle's off-road capability. It refers to the deepest water level a vehicle can safely pass through. 2. Judging Wading Depth: When the water depth is one-third of the tire height, you can pass through with confidence. As long as you operate correctly, it will not cause unnecessary damage. When the water depth exceeds half of the tire height, you should be cautious, as this may easily lead to water entering the vehicle. If the wading depth exceeds the bumper, you should remain highly alert while driving to avoid water entering the engine.
Was this review help?
5
1
Share
More Forum Discussions

How Long Does It Take to Transfer a Driver's License Back to the Registered Residence?

It takes about two days to transfer a driver's license back to the registered residence. Below is the relevant information about transferring a driver's license back to the registered residence: 1. The driver's license will not automatically transfer back; the driver must personally handle the transfer procedures to move it back to the registered residence. 2. Conditions for transferring a driver's license to another location: the driver's household registration has been moved to the local area; or the driver resides locally; the national public security traffic management information system is queried to compare and confirm that the applicant's information and driver's license details are authentic and valid. 3. The driver must not have had their license revoked, canceled, or invalidated by law. 4. The driver must not have accumulated the maximum penalty points on their license.
2
5
Share

Is there compensation for automotive recalls?

There is no compensation for automotive recalls. The following are the relevant regulations: 1. According to the "Regulations on the Recall of Defective Automotive Products": Article 19: For defective automotive products subject to recall, the manufacturer shall promptly take corrective measures such as repair, replacement, or return to eliminate the defects. The manufacturer shall bear the costs of eliminating the defects and the necessary transportation costs of the defective automotive products. 2. Article 24: If a manufacturer violates the provisions of these regulations and commits any of the following acts, the product quality supervision department shall order corrections and impose a fine ranging from 1% to 10% of the value of the defective automotive products; if there are illegal gains, the gains shall be confiscated; if the circumstances are serious, the licensing authority shall revoke the relevant license: (1) Failing to cease production, sale, or import of defective automotive products; (2) Concealing defect information; (3) Refusing to recall after being ordered to do so.
4
1
Share

How to Replace the Transmission Fluid for Chevrolet Cruze?

Chevrolet Cruze transmission fluid replacement method is as follows: 1. Lift the car and place a large container underneath to catch the used fluid. Use an appropriate screwdriver to remove the inner and outer transmission covers, allowing the transmission fluid to drain out. 2. Once most of the fluid has drained, remove the last oil pan. 3. Carefully remove the transmission fluid filter. 4. Take off the oil pan gasket and clean any surrounding residue. 5. Use a cotton cloth to thoroughly clean all the cleaned transmission fluid filter components, then reinstall them one by one. 6. Wipe the surfaces of all replaced parts clean, ensuring there are no water or oil stains, as these can cause leaks. Reinstall the cleaned oil pan and gasket together, making sure they fit tightly to prevent leaks. Clean the filter housing and wipe it dry, then reinstall the cleaned housing by first securing two diagonal bolts before tightening all bolts completely.
13
5
Share

Where to Collect the Annual Inspection Sticker?

You can collect the annual vehicle inspection sticker at the vehicle management office or at the inspection stations designated by the vehicle management office. Below are the steps to apply for the inspection sticker online for vehicles exempt from inspection for 6 years: 1. Open the Traffic Management 12123 mobile app, click "More," and find "Apply for Inspection Exemption Sticker" under the "Service Center" to apply for the inspection sticker for your registered exempt vehicle. 2. Select the exempt vehicle for which you are applying for the inspection sticker, read the "Inspection Exemption Sticker Application Instructions," then click "Read and Agree" to proceed to the vehicle information confirmation page. 3. After confirming the vehicle information, click "Next" to proceed to the mailing address selection page. Once you select the mailing address, you will be directed to the information confirmation and submission page. Verify all the information, obtain the SMS verification code, and after successful verification, click "Submit" to complete the application for the inspection exemption sticker. 4. Users who fail the online verification of compulsory traffic insurance and vehicle and vessel tax need to upload photos of the compulsory traffic insurance and vehicle and vessel tax certificates. The subsequent steps are the same as above. After successful submission, you can check the progress of your application at any time under "Online Progress" on the homepage.
6
0
Share

What tires does the Haval F7 use?

Haval F7 uses Goodyear EfficientGrip series tires. Different models are equipped with different tire sizes, including 255/65R17 102H, 225/55R19 99H, and 225/55R19 99V. Relevant details are as follows: 1. The Haval F7 is equipped with a tire pressure monitoring system that can monitor tire pressure and temperature in real time. When abnormalities are detected, it will promptly alert the driver to take appropriate measures, enhancing vehicle safety. 2. The Haval F7 comes with a non-full-size spare tire, which is only for temporary use. Only one small-size spare tire is allowed to be installed at a time. After installation, drivers should quickly find a repair shop to replace the tire. The spare tire should not be used as a long-term substitute to avoid potential hazards.
20
1
Share

How Long Does It Take to Paint a Car?

Painting a car typically takes about five days. Dismantling takes one day, and the time required for priming and base coating depends on the extent of the body damage. Below are the detailed steps for car painting: 1. First is the primer. The bare car shell is dipped into a syrup-like paint tank, then removed and dried; 2. Next, it is sent to a dust-free workshop where the topcoat is applied using electrostatic painting technology; 3. It is then baked at around 200 degrees Celsius; 4. Finally, a layer of clear coat is applied. Below is some related information about car paints: 1. Generally, there are several types of topcoats: standard paint, metallic paint, and pearl paint. 2. Metallic paint contains aluminum powder, which gives it a shiny appearance after application. 3. Pearl paint includes mica particles. Mica is a very thin, flaky material, so its reflective properties are directional, creating a colorful effect.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.