Which SUV has the lowest fuel consumption?

1 Answers
DiMackenzie
07/30/25 9:52am
Niro 1.6L Hybrid, with a fuel consumption of 4.65L/100km. Below are some related introductions about fuel consumption: 1. Habits and Road Conditions: Fuel consumption is greatly influenced by driving habits and road conditions. Avoid heavy acceleration; gradual acceleration from a start is the most fuel-efficient. To save fuel, avoid pressing the accelerator heavily when starting, as heavy acceleration can increase fuel consumption by 2 to 3 times compared to normal speed starts. 2. Braking: Maintaining a safe distance and avoiding frequent braking saves even more fuel. If you don't maintain a safe distance, you may need to brake often on the road. When braking, an automatic transmission vehicle's gear will drop, requiring the vehicle to accelerate again from a lower gear. Starting from a stop or a low gear requires the engine to consume more fuel.
Was this review help?
2
5
Share
More Forum Discussions

Where is the USB port in the Boyue Million Edition?

USB port is located inside the center armrest box. Function of USB port: Most in-car USB ports are designed for data transfer. Although they display charging when connected, the current is only about 0.5A. When listening to music or using mobile navigation, the power consumption actually exceeds the charging capacity within the same time frame. If the battery level decreases instead of increasing, it's recommended to stop using the USB port for charging. Current specifications of USB port: Car USB ports may have either 5V/2.1A or 5V/0.5A current output. Many mobile phones require 5V/1A input current. The 5V/2.1A car USB port can provide 1A current for phones and 2A for tablets. However, the 5V/0.5A version clearly fails to meet current standards, resulting in not only prolonged charging time but also causing the phone to overheat during charging.
12
2
Share

What is the correct way to use the DS gear?

The correct way to use the DS gear is: when switching from D gear to S gear or from S gear to D gear, there is no need to press the brake pedal or stop the vehicle; you can directly switch while driving. The gears of an automatic transmission are: 1. D gear refers to the drive gear; 2. R gear refers to the reverse gear; 3. P gear refers to the parking gear; 4. L gear refers to the low gear; 5. N gear refers to the neutral gear; 6. W gear refers to the snow/rain gear; 7. S gear refers to the sport mode driving gear. The function of an automatic transmission is to use planetary gear mechanisms for shifting. It can automatically shift gears based on the degree of the accelerator pedal and changes in vehicle speed, allowing the driver to control the speed simply by operating the accelerator pedal.
4
0
Share

How to Start a BMW 1 Series When the Key Fob Battery Dies?

To start a BMW 1 Series when the key fob battery is dead, follow these steps: 1. Locate the button on the side of the key fob, press and hold it, then pull out the mechanical key; 2. Find the small hole under the exterior door handle on the driver's side; 3. Insert the key into the hole and lift it upwards to remove the cover, revealing the keyhole; 4. Insert the key into the keyhole and turn it counterclockwise while pulling the door handle to open the door; 5. Locate the key icon under the right side of the steering wheel in the driver's compartment; 6. Place the key against the icon and press the start button to start the car. BMW 1 Series models include: BMW 120i, BMW 120i M, BMW 125i M, BMW 118i, BMW 118i M, and others.
8
5
Share

What does it mean when the key light on the dashboard keeps flashing?

The flashing key light on the dashboard indicates that the anti-theft system has been activated. When this indicator light is on, the car cannot be started. The anti-theft system is designed to prevent the car from being stolen and to protect valuable items inside the vehicle. This system mainly consists of electronic control circuits, alarm devices, remote control keys, mechanical keys, and actuators. Common warning lights on the dashboard include: oil pressure warning light, engine fault warning light, coolant temperature warning light, brake system fault light, tire pressure warning light, battery warning light, power steering system fault light, and electronic stability control system indicator. Reasons for warning lights to illuminate include: 1. Poor fuel quality; 2. Dirty engine cylinders with carbon deposits; 3. Damaged, poorly connected, or interrupted signals from coolant temperature sensors, crankshaft position sensors, air flow sensors, intake air temperature sensors, or oxygen sensors; 4. Clogged air filter element.
8
3
Share

What engine is equipped in the Changan CS35?

Changan CS35 is equipped with a 1.5T turbocharged engine and a 1.6L naturally aspirated engine. The working principle of the engine is: 1. Mixing air and gasoline in a certain proportion to form a combustible mixture; 2. The intake stroke draws the mixture into the cylinder, where it is compressed, ignited, and burned to generate thermal energy; 3. The high-temperature, high-pressure gas acts on the top of the piston, driving the piston to perform reciprocating linear motion, and the mechanical power is output externally through the connecting rod, crankshaft, and flywheel mechanism. Taking the 2017 Changan CS35 as an example, it is a compact SUV with body dimensions of: length 4170mm, width 1810mm, height 1670mm, wheelbase of 2560mm, minimum ground clearance of 180mm, and a curb weight of 1325kg.
11
1
Share

What does ECO in automatic transmission mean?

ECO in automatic transmission refers to the car's economical driving mode function. ECO is an English abbreviation formed from the words Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the ECO indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. ECO mode is categorized into active and non-active types, with the difference being that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active ECO mode does not have a dedicated button. When the dashboard ECO indicator light turns on, it serves merely as a reminder function. ECO automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light. Most cars use the active ECO driving mode, meaning they have their own switch button. Therefore, during daily driving, we can activate the ECO mode. However, it is unnecessary to enable ECO mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not demonstrate the fuel-saving characteristics of ECO and could also affect the vehicle's power performance. Additionally, ECO mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the ECO mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, ECO may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the ECO mode will not function in such cases.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.