···
Log in / Register

Which SUV has the largest trunk space?

5Answers
DiLola
07/29/2025

The SUV with the largest trunk space is the Toyota 4Runner. The Toyota 4Runner is more like a truck, not only does it have a domineering exterior design, but its off-road performance is also excellent. Introduction to the Toyota 4Runner: The 4Runner, known as the 'Super' or 'Fortuner' in China, can be considered a sibling to the Land Cruiser Prado. It shares the same wheelbase, chassis, powertrain, and four-wheel-drive system. Unfortunately, the 4Runner is only available in the North American market and is rarely seen in China, making its recognition relatively low domestically. Exterior of the Toyota 4Runner: It features a distinctive LTD grille and bumper design, which not only looks more imposing but also includes many detailed chrome accents, elevating the vehicle's overall appearance. The side profile adopts a rugged body line and 20-inch wheel design, as if to announce that this is a high-performance off-road vehicle.

Was this review help?
17
4
Share
LeBrielle
08/15/2025

If you're looking for the SUV with the largest cargo space, the Chevrolet Suburban is definitely the top choice. I've used it, and it can reach around 144 cubic feet at maximum capacity. With the third-row seats folded down, you can easily fit in suitcases, strollers, and even bicycles. It's incredibly practical for families with kids—no more worrying about luggage when traveling. Of course, the actual space depends on how you configure the seats; for example, it's even larger in five-seat mode. However, parking can be a bit tricky due to its size, and fuel consumption is higher. Similar options include the GMC Yukon XL and Toyota Sequoia, which are also quite spacious, but the Suburban has the best real-world measurements. A spacious SUV makes daily life much easier, especially when you have a lot of people or cargo to haul—definitely worth considering.

Was this review help?
2
4
Share
Expand All
SanRylee
10/17/2025

From the perspective of outdoor enthusiasts like us, large-SUVs with spacious trunks like the Suburban are the most exciting. Its maximum cargo capacity of 145 cubic feet makes loading camping tents, skis, or grills a breeze. I often take it camping and found that folding down the rear seats is key—it doubles the space. The Ford Expedition Max is also impressive, offering around 130 cubic feet of space with better value for money. However, be aware that larger vehicles can be cumbersome, so take extra care when navigating mountain road turns. Additionally, regular tire pressure checks and maintenance can optimize the experience. In summary, if you frequently venture into the wild, these extra-large SUVs are absolute game-changers.

Was this review help?
6
5
Share
Expand All
VanPiper
11/30/2025

I believe the top three SUVs with the largest trunk space are the Suburban, Expedition Max, and Sequoia. The Suburban is the largest, with approximately 144 cubic feet; the Expedition follows closely; the Sequoia is fuel-efficient and durable. Space measurement is based on folding the seats, ensuring practicality. When choosing among them, budget and fuel consumption should also be considered.

Was this review help?
19
0
Share
Expand All
DelRose
01/20/2026

From a practical buyer's perspective, the Suburban stands out with its massive cargo capacity of 144 cubic feet, making it incredibly convenient for daily hauling or moving. However, its large size can make parking challenging, potentially inconvenient for city use. Compared to others like the Cadillac Escalade ESV, which also offers substantial space but leans more towards luxury, the key is to consider your needs and space utilization—features like foldable seats significantly impact functionality. We recommend test-driving to experience the actual load capacity rather than relying solely on specifications.

Was this review help?
3
0
Share
Expand All
More Q&A

How to Check the Date of Headlights on a Used Car?

To read the production date of the headlights on a used car, you can check the stamp on the headlights, which is usually located at the bottom left or bottom right corner of the headlight. Below are specific details about replacing headlights: 1. Choosing Headlights: When selecting new headlights, you should choose the appropriate bulb model based on your car, while also considering factors such as annual inspections and whether the battery can handle it. It is best to opt for original equipment manufacturer (OEM) headlights. 2. Installation and Removal: Avoid touching the glass shell of the bulb directly with your hands during installation or removal. When installing the bulb, do not touch the glass part with your fingers, as even the slightest oil residue on the glass can shorten the bulb's lifespan and pose a risk of cracking with prolonged use. 3. Light Intensity: When replacing the bulb, compare the light intensity and adjust it properly in time, as adjusting it later can be time-consuming and labor-intensive.
8
3
Share

How to Adjust When the Car Body is Not Straight During Curb Parking?

Practice makes perfect. Here are the adjustment methods for an unaligned car body during curb parking: Use the wiper to judge whether the car front is straight—no problem. By comparing the wiper with road markings, maintain a fixed distance or angle while driving. If it deviates, it indicates the car front is not straight. Additionally, depending on each person's height difference, other parts of the car front can also serve as reference points, such as the roof corner or reinforcement ribs. Actually, the most crucial point to ensure the car front is straight is to learn to look into the distance, observing distant traffic lights, the rear of the car ahead, lane markings, etc., to see if the car body is straight. When parking at the curb, after selecting the parking position, turn the steering wheel to the right. At this time, the steering angle should not be too large. When the center of the car front is about to align with the right edge line, immediately turn the steering wheel back to the left. The steering wheel turning range can be slightly larger at this point.
10
5
Share

What does a yellow light with an 'a' inside a circle on the dashboard mean?

The reason for a yellow light with an 'a' inside a circle appearing on the dashboard is that the engine auto start-stop system is active. At this time, the car often shuts off, and releasing the brake will automatically restart the engine, allowing normal driving to resume. The conditions for auto start-stop activation include: engine coolant temperature being too low after a cold start, typically below 70 degrees Celsius; outside temperature below 5 degrees Celsius, or cabin temperature below 20 degrees Celsius when heating is on; insufficient battery charge, usually below 60%; steering wheel angle exceeding 30 degrees; front seat belts not fastened; and parking on a slope. The auto start-stop function activates automatically each time the car is started, provided the above conditions are met, and the vehicle speed exceeds 3 km/h for about 4 seconds, without requiring any additional action from the driver. However, the auto start-stop function must be turned off in the following situations: during water wading; when driving on a slope (most cars are usually set to automatically disable it in this case); and when refueling, the engine must be completely turned off and power must be cut before refueling.
16
1
Share

What is the working principle of an evaporator?

The working principle of an automobile evaporator: The liquid refrigerant enters through the feed port, while the heating steam heats the heating tube bundle inside the heating chamber. The thicker tube in the middle of the heating chamber, due to its smaller heating area compared to the heating tube bundle, causes the refrigerant vaporized by the heating tube bundle to rise and enter the evaporation chamber. Below are related introductions: 1. Definition of the evaporator: The evaporator is a device used to heat the refrigerant and absorb heat from the external environment, mainly composed of a heating chamber and an evaporation chamber. 2. Application in thermal units: In fresh air heat exchange units and fan coil units, the evaporator primarily provides chilled water during the cooling process and heated refrigerant during the heating process. 3. Application in ground source heat pump systems: Its role in ground source heat pump systems is opposite to that of the condenser. During the heating process of the ground source heat pump unit, the evaporator acts as a ground source side device, heating the circulating water on the ground source side. The heated water is then transferred to the condenser through heat exchange in the unit, where the heat from the hot water is discharged by the condenser.
18
5
Share

What do 4L and 4H mean in 4WD vehicles?

4H and 4L are two modes available in four-wheel-drive vehicles. 4H stands for four-wheel-drive high-speed mode, while 4L stands for four-wheel-drive low-speed mode. These two drive modes have certain differences in controlling the transmission and are used in different scenarios. Properly utilizing the four-wheel-drive modes according to terrain can not only improve the vehicle's off-road capability but also reduce fuel consumption to some extent. Usage scenarios for 4H and 4L modes: 1. Slippery surfaces: If driving on snow or slippery roads, the 4H mode is very suitable, as it ensures sufficient drive wheels while avoiding excessive driving force that could cause wheel slip. 2. Climbing: Due to its strong driving force, the 4L mode can be used when climbing slopes or during off-road driving, maximizing the vehicle's power. 3. High-speed driving: High-speed four-wheel drive is not suitable for highway driving. For part-time four-wheel-drive vehicles, dry paved roads are not suitable for 4H or 4L modes; only the 2H mode should be selected.
11
3
Share

What documents are needed for car transfer?

The seller needs to prepare the original ID card of the vehicle owner, vehicle registration certificate, vehicle license, original purchase invoice or transfer invoice of the vehicle, and the buyer needs to provide the original ID card of the buyer. Some regions also require a "vehicle purchase quota". The procedures for car transfer are as follows: 1. Obtain the form: obtain and fill out a copy of the motor vehicle change, transfer, modification, suspension, or scrapping approval form. 2. Stamp: affix the same seal as the original registration, and private vehicles must submit the owner's ID card for verification. 3. Review: go to the vehicle management section of the traffic police detachment and submit the documents to the registration acceptance counter for review by the handling officer. 4. Inspection: vehicles that meet the transfer conditions will be sent to the motor vehicle inspection counter for inspection and confirmation. 5. Payment: after passing the inspection, for transfers or changes within the same county or city, go directly to the license plate management counter to wait for notification and pay the fee. 6. Tax payment: the transaction tax is issued by the used car trading center and is charged at 1.48% of the vehicle's estimated value.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.