Which model is the Teana V6?

3 Answers
PaigeRose
07/29/25 7:43pm
Teana V6 refers to the older models of the Teana. The V6 engine of the Teana adopts true round machining technology, ensuring smooth cylinder walls and is equipped with low-friction piston rings to reduce friction between the pistons and cylinder walls. In a V6 engine, the crankshaft completes two revolutions while the cylinders perform six power strokes, resulting in shorter intervals between cylinder operations. V6 denotes the number of cylinders and their arrangement—specifically, a six-cylinder engine with a V-shaped configuration. This arrangement ensures that each cylinder works in harmony, minimizing noise and ensuring smooth operation. V-type engines are compact in length and height, making them easier to install. Other common V-type engines include V8, V10, and V12.
Was this review help?
19
1
Share
BrielleRose
08/14/25 3:06pm
I'm quite interested in cars. The Teana V6 usually refers to the V6 engine version of the Nissan Teana series, mainly found in the second and third generations, such as the Teana Duke edition from 2008 to 2013. This car was equipped with a 3.5-liter V6 naturally aspirated engine, part of Nissan's VQ series, offering strong power and smooth acceleration, making it particularly enjoyable to drive. I remember it was positioned in the mid-range market back then, competing with the Toyota Camry and Honda Accord, featuring a more rounded design and high interior comfort. Unfortunately, the new Teana has mostly shifted to four-cylinder or hybrid models now, due to stricter environmental regulations. If you search online for information on older used cars, you can find many stories about this model—classic and practical.
Was this review help?
13
5
Share
Expand All
MacRachel
10/15/25 6:58am
I drove a V6 Teana for a while, with the engine outputting around 250 horsepower. It had quick acceleration and made climbing hills effortless, making overtaking in the city a breeze. The fuel consumption was slightly higher, with a full tank lasting about 500 kilometers for daily use. The engine noise was minimal, the cabin space was spacious, and the trunk was sufficiently large. These features were considered highlights among its peers at the time, without the abruptness of turbocharged engines. I remember considering the cost-performance ratio when purchasing it—it was a bit more expensive than the entry-level version, but the performance was worth it. If you're looking for a used car like this now, don't forget to check the maintenance records to ensure the engine is in good condition.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

Where is the window regulator control module of JAC Refine S3 located?

Refine S3's window regulator control box is located inside the protective panel under the steering wheel. A car lift is installed on the vehicle, mainly used for field wiring and streetlight maintenance. Exterior design: The front face continues JAC's vase-mouth design, incorporating urban crossover SUV design elements, presenting an overall fashionable and vibrant appearance. The grille features three prominent chrome strips, complemented by front and rear light designs and window lines. The windows and lower door sills are adorned with chrome decorations. Powertrain: Equipped with a 4GB1.5L engine delivering rated power of 83kW/6000rpm, maximum torque of 146Nm, and low-end torque reaching 100Nm. The transmission options paired with the engine include 6MT and CVT gearboxes, reducing fuel consumption to 6.5L per 100km.
16
2
Share

Does Overfilling Brake Fluid Have Any Impact?

Overfilling brake fluid does have certain impacts. While it does not pose any harm to braking performance, the excess brake fluid may overflow from the reservoir opening, contaminating the engine compartment and potentially affecting certain components, given that brake fluid is highly corrosive. Below is an introduction to three scenarios related to brake fluid levels: Overfilled: When brake fluid is overfilled, the excess should be promptly extracted. Insufficient: When a shortage of brake fluid is detected, it is essential to replenish the reservoir with the correct specification of brake fluid as soon as possible, since brake fluid directly affects the entire braking system. Normal: Under normal circumstances, the brake fluid level should not fall below the minimum mark. Although brake fluid is consumed during vehicle operation, the consumption rate is extremely low.
8
0
Share

What does the dripping oil can warning light mean in a car?

The dripping oil can warning light in a car is the engine oil warning light. The method to reset it is: 1. Turn off the ignition switch and hold the set button; 2. Turn on the ignition switch and press the button on the left side of the instrument panel. Engine oil, also known as engine lubricant, is composed of base oil and additives. It serves to lubricate and reduce friction in the engine, assist in cooling, provide sealing to prevent leaks, prevent rust and corrosion, and cushion vibrations. The reasons for the oil light coming on include: 1. Insufficient oil level; 2. Engine temperature being too high; 3. Oil pump wear causing abnormal operation; 4. Improper internal engine assembly; 5. Excessive carbon buildup clogging the oil filter; 6. Pressure relief valve set pressure being too low or improperly adjusted.
1
3
Share

When Should I Change the Oil for My New Car?

For a newly purchased car, the oil should be changed at around 5,000 kilometers. The method for changing the oil is as follows: 1. Use a jack to lift the vehicle, locate the oil drain bolt, and loosen it to drain the oil; 2. After removing the oil filter, place a container underneath it; 3. Replace with a new oil filter and add new oil. The functions of engine oil include: 1. Reducing friction and high temperatures; 2. Cooling and lowering temperature; 3. Cleaning and purifying; 4. Damping and cushioning; 5. Preventing rust and corrosion. Engine oil, also known as motor lubricant, is composed of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while the additives compensate for and improve any deficiencies in the base oil's performance.
9
3
Share

What causes the engine to shake and the fault light to come on?

The reasons for the engine shaking and the fault light coming on are: 1. Excessive carbon deposits in the throttle or engine; 2. Oxygen sensor failure; 3. Fuel injector leakage; 4. Engine knocking; 5. Poor fuel quality. The solutions for the engine fault light coming on are: 1. Clean the throttle or engine interior; 2. Replace the oxygen sensor; 3. Replace the fuel injector; 4. Replace the engine; 5. Use higher-grade fuel. The maintenance methods for the engine are: 1. Use high-quality engine oil; 2. Use qualified coolant; 3. Regularly clean the radiator scale; 4. Regularly remove carbon deposits from the car; 5. Replace the car's three filters on time; 6. Maintain a reasonable engine speed.
18
0
Share

Is the car under whose name the vehicle license is registered?

The car belongs to the person whose name is on the vehicle license. Below is relevant information about the vehicle license: Composition: The vehicle license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the endorsed certificate core, while the back features the vehicle photo, sealed in a plastic sleeve. The supplementary page is the endorsed certificate core. Function: Possessing the 'Motor Vehicle License' is one of the prerequisites for a vehicle to be driven on the road. Driving without carrying the vehicle license is a violation. The 'Owner Name' column on the 'Motor Vehicle License' is not just a matter of name; the registered owner on the license is the legally recognized owner of the vehicle, with the right to legally use and dispose of the property. In the event of traffic accidents or economic disputes, they are also the legally responsible party.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.