Which model is the Focus caf7163b4?

1 Answers
StNevaeh
07/30/25 10:36am
Focus caf7163b4 is a Focus model produced by Changan Ford with a 1.6L naturally aspirated engine. Below are specific details about the Focus: 1. Brand Introduction: The Focus is a Class A family sedan under the Ford brand. In 1991, Ford Motor Company exhibited a concept car named GHIA, which later became the prototype for the Focus. 2. Design: The Focus features a reinforced cage-type body structure design and uses high-strength steel plate materials to enhance body rigidity. The front and rear impact buffer zones and door anti-collision beams also adopt the same reinforced structure design. The impact buffer zones distribute collision forces evenly across the entire body, thereby avoiding collision injuries to passengers in the cabin and significantly improving shock absorption capabilities.
Was this review help?
20
0
Share
More Forum Discussions

How Often Should Focus Brake Pads Be Replaced?

There is no fixed replacement interval for Focus brake pads; it depends on the degree of wear. Each brake pad has a raised indicator on both sides, with a thickness of approximately three millimeters. If the brake pad thickness has worn down to be level with this indicator, replacement is necessary. Taking the 2020 Focus as an example, it belongs to the compact car category with body dimensions of 4378mm in length, 1810mm in width, and 1468mm in height, and a wheelbase of 2705mm. The 2020 Focus features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 122PS, a maximum power of 90kW, and a maximum torque of 153Nm, paired with a 6-speed manual transmission.
13
4
Share

How to remove the wrench icon on Hanteng X5?

The method to remove the wrench icon on Hanteng X5: 1. Turn off the ignition switch to cut off power to the vehicle; 2. Press and hold the long rod button at the lower right corner of the instrument cluster; 3. Turn on the ignition switch to power the vehicle (without starting the engine); 4. While keeping the long rod button on the instrument cluster pressed, step on the brake pedal; 5. Wait for about 5 seconds to clear the wrench icon. Taking the 2020 manual comfort version of Hanteng X5 as an example, its body dimensions are 4501mm in length, 1820mm in width, and 1648mm in height, with a wheelbase of 2600mm. This model is equipped with a 1.5L turbocharged engine, delivering a maximum power of 115kW and a maximum torque of 215Nm.
7
0
Share

How to Disassemble a Tiguan Key?

Tiguan key disassembly method: First, pull out the mechanical key from the car key. After removing the mechanical key, you can see an opening mark at the bottom of the key. At this point, use a small screwdriver to turn the opening mark at the bottom by 90 degrees, then rotate the outer shell of the key to disassemble it. Taking the 2021 Tiguan L as an example, it belongs to the mid-size SUV category, with body dimensions of 4712mm in length, 1839mm in width, and 1673mm in height, a wheelbase of 2791mm, a fuel tank capacity of 60 liters, and a curb weight of 1650kg. This vehicle is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 186PS, a maximum power of 137kW, a maximum torque of 320Nm, and is paired with a 7-speed dual-clutch transmission.
13
5
Share

What are the steps for keyless start in a manual transmission car?

Manual transmission keyless start steps are: 1. After the driver sits in the driver's seat, press the start button once to activate the ACC light, then press it again for vehicle self-check; 2. Depress both the brake and clutch pedals, then press the one-touch start button to ignite the engine; 3. Release the foot brake, you may choose to warm up the vehicle while stationary; 4. Depress the foot brake again, shift into D gear, and release the handbrake (for electronic parking brakes, simply press the button briefly); 5. Gradually release the foot brake, apply some throttle, and complete the starting process. Manual transmission gears can be categorized as: 1. First gear is the starting gear for vehicle launch; 2. Second gear is the passing gear; 3. Third gear is the transition gear; 4. Fourth gear is the cruising gear; 5. Fifth gear is the high-speed gear.
7
0
Share

What Causes a Car's Water Temperature to Be Too High?

The reasons for a car's water temperature being too high are: 1. Insufficient coolant in the engine cooling system; 2. Malfunction of the thermostat, leading to excessive water temperature; 3. Abnormal operation of the cooling fan, resulting in poor heat dissipation of the coolant; 4. Failure in the water pump's operation, causing the pump to rotate improperly; 5. Engine oil entering the radiator. The solutions for high car water temperature are: 1. Pull over to the roadside; 2. Cover the radiator cap with a multi-folded wet cloth, then slightly unscrew the cap to allow steam to slowly escape; 3. Monitor the dashboard's water temperature gauge and, once the radiator pressure decreases, add cold water or coolant.
20
2
Share

What Causes Steering Wheel Vibration When Driving at 120 km/h?

Steering wheel vibration when driving at 120 km/h can be caused by: 1. Force feedback effect; 2. Issues with the vehicle's tires; 3. Deformation of the front wheel rims or unequal number of tire bolts; 4. Loose installation of transmission system components; 5. Bent drive shaft, power imbalance, or deformation of the front axle; 6. Shock absorber malfunction. The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. The proper way to operate the steering wheel is: 1. Place both hands appropriately on the 9 o'clock and 3 o'clock positions of the steering wheel with moderate force; 2. Naturally grip the wheel with fingers inward and extend thumbs naturally along the edge of the steering wheel.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.