Which manufacturer produces the engine for the Trumpchi GS4?

1 Answers
BeauFitz
07/30/25 8:34am
Trumpchi GS4's engine is independently developed and produced by Trumpchi. The Trumpchi GS4 is a compact SUV under the Trumpchi brand. In terms of body dimensions, this vehicle measures 4545 mm in length, 1856 mm in width, and 1668 mm in height, with a wheelbase of 2680 mm. Regarding powertrain, the Trumpchi GS4 is equipped with a 1.5-liter turbocharged engine. This engine delivers a maximum power output of 124 kW, achieving peak power at 5000 rpm and maximum torque between 1700 to 4000 rpm. The engine incorporates DCVVT technology and direct fuel injection, utilizing an aluminum alloy cylinder head and a cast iron cylinder block.
Was this review help?
6
1
Share
More Forum Discussions

What Are the Solutions for Slow Heating in Car Warm Air System?

The solutions for slow heating in car warm air system are: 1. Replace the air filter; 2. Replace the air conditioning system hoses; 3. Clean the evaporator ducts; 4. Clean the condenser. The method to turn on the car warm air is: 1. Start the car; 2. Turn off the AC; 3. Wait until the water temperature rises to normal temperature; 4. Turn the knob to the red zone to activate the warm air mode. Precautions for using car warm air: 1. Wait 3 to 5 minutes after starting the car until the water temperature rises to normal temperature before turning on the warm air; 2. Do not press the AC button when turning on the warm air to avoid increasing fuel consumption and hindering the rise of interior temperature; 3. Avoid immediately switching to external circulation when turning on the warm air. After activating the warm air, switch the circulation mode to internal circulation to raise the interior temperature more quickly; 4. When parking for a long time, turn off the warm air in time or roll down the window slightly to avoid carbon monoxide poisoning.
12
3
Share

What brand is the original engine oil for the Buick Regal?

Mobil is the original engine oil brand for the Buick Regal. The oil specification is 5W-40, and it is a fully synthetic oil. The viscosity of engine oil changes with temperature, so special attention must be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The second number represents the kinematic viscosity of the oil at 100°C. A higher number indicates better viscosity retention at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Buick Regal is as follows: Wait for the engine temperature to cool down, allowing the oil to drain back into the oil pan; Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passages to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the gasket of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover. Typically, about three-quarters of a bottle of oil is sufficient; Start the engine and let it run for 5 minutes, checking for any leaks around the drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.
20
2
Share

What Causes Engine Coolant Leakage?

Engine coolant leakage can be caused by: 1. Sand holes in the engine block, if present; 2. Poor quality of the antifreeze added to the vehicle; 3. Unscrew the engine oil filler cap to check for signs of oil emulsification; 4. Issues with the radiator's quality. The function of the engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by expanding gases after combustion in a sealed cylinder, pushing the piston to perform work. Engine components include: the engine block, crankshaft and connecting rod mechanism, valve train and intake/exhaust system, fuel supply system and governor, starting device, cooling system, and lubrication system. Engine maintenance methods include: 1. Using qualified engine oil; 2. Using qualified coolant and antifreeze; 3. Regularly cleaning scale from the radiator; 4. Regularly removing carbon deposits from the engine; 5. Regularly replacing the vehicle's three filters; 6. Maintaining reasonable engine speed.
13
2
Share

What are the methods for cleaning combustion chamber carbon deposits?

Methods for cleaning combustion chamber carbon deposits are: 1. Using an automotive IV drip; 2. Engine disassembly and cleaning. Effects of carbon deposits on vehicles: They cause poor engine performance, leading to difficulties in starting, unstable idling, poor acceleration, backfiring during sudden acceleration, excessive exhaust emissions, and increased fuel consumption. Methods for cleaning automotive carbon deposits are: 1. Remove the intake pipe to expose the throttle body; 2. Disconnect the negative battery terminal and turn off the ignition switch; 3. Straighten the throttle plate and spray a small amount of carburetor cleaner into the throttle body; 4. Wipe clean with a polyester cloth or high-density non-woven fabric. Methods for cleaning engine carbon deposits are: 1. Using cleaning additives; 2. IV drip cleaning; 3. Disassembly and cleaning.
16
1
Share

What type of engine oil is suitable for Honda CR-V 2.4?

Honda CR-V 2.4 uses 5W30 engine oil. The manufacturer provides three options for original engine oil: mineral oil, semi-synthetic oil, and full-synthetic oil. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the vehicle. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value indicates better ability to maintain viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Honda CR-V 2.4 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain; Use a special wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover. Generally, fill up to three-quarters of a standard oil container; Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the dipstick to check if the engine oil level is within the standard range.
3
4
Share

What Are the Reasons Why Windshield Washer Fluid Won't Spray?

The reasons why windshield washer fluid won't spray are: 1. The nozzle is clogged with dust; 2. The windshield washer fluid level is low; 3. The fuse is blown; 4. The internal pipes are clogged with scale. The functions of windshield washer fluid are: 1. To clean debris on the windshield; 2. To lower the freezing point of the liquid; 3. To ensure the windshield is clear and transparent, providing a clear view; 4. To eliminate static charges on the glass surface; 5. To reduce friction between the wiper and the glass, preventing scratches. The method for adding windshield washer fluid is: 1. Turn on the wiper switch, and the windshield washer fluid will spray from below the windshield; 2. Continue until the spray nozzle stops spraying, then open the windshield washer fluid cap and add a small amount of fluid; 3. Turn on the wiper switch again to clear out the remaining fluid; 4. When the spray nozzle stops spraying for the second time, add 4 liters of windshield washer fluid, then securely close the cap.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.