Which lane to take after starting in Subject 3?

1 Answers
LeVera
08/26/25 5:53am
After starting in Subject 3, take the rightmost lane. However, except when accelerating during the start, you should try to drive in the middle lane as much as possible at other times. After making a U-turn or left turn, the vehicle should enter the leftmost lane to avoid frequent overtaking, which could affect the test mentality. Below is relevant information about Subject 3: 1. Introduction: Subject 3, also known as the road test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. 2. Test content: The road driving skills test content varies for different types of vehicles eligible for driving. Generally, it includes: preparation before getting on the car, starting, driving straight, shifting gears, changing lanes, parking by the side, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving.
Was this review help?
10
0
Share
More Forum Discussions

How to Clean a Car Radiator?

Cleaning a car radiator involves the following steps: 1. Remove the front grille mesh, then dismantle the hood lock assembly in the middle to fully expose the condenser; 2. Use an air gun to blow away debris like fluff and loose dust—ideally, clean from inside the engine compartment outward if possible; 3. Rinse with water, preferably at a professional car wash facility for expert cleaning. The car radiator is a critical component of water-cooled engines, serving as a key part of the cooling circuit that absorbs heat from the engine block to prevent overheating.
19
4
Share

How Often Should CVT Fluid Be Changed?

CVT fluid should be changed every 3 years or 60,000 kilometers. Over time, the transmission fluid becomes dirty and its viscosity decreases, which compromises its ability to protect the transmission. This can lead to symptoms such as rough shifting, abnormal acceleration, increased noise, and in severe cases, premature transmission failure, shortening the transmission's lifespan. Continuously Variable Transmissions (CVTs) allow for a continuous change in the gear ratio, ensuring optimal matching between the drivetrain and engine conditions. This improves the vehicle's fuel efficiency and power performance while enhancing the driver's ease of operation and passenger comfort.
8
5
Share

Why won't the car start after being parked for 6 days?

If a car won't start after being parked for 6 days, it is likely due to insufficient battery power, excessive carbon buildup in the idle motor, intake tract, intake valves, and combustion chamber; or it could be caused by issues with the fuel injectors, such as leaks or excessive carbon deposits, leading to an overly lean air-fuel mixture during startup and preventing the engine from starting. It is advisable to promptly contact a 4S shop or repair shop for inspection and maintenance. Leaving a car unused for extended periods not only results in starting issues but also causes damage to the exterior paint. Long-term outdoor parking exposes the vehicle to wind, rain, and sunlight, and without regular maintenance, the paint surface can become corroded and oxidized. Therefore, when parking the vehicle for an extended time, it is recommended to cover it or park it in a cool, dry place, and perform regular maintenance.
14
5
Share

What are the basic components of a car body structure?

The basic structure of a car body consists of the body shell, doors, windows, front sheet metal components, interior and exterior trim parts, body accessories, seats, as well as ventilation, heating, air conditioning, and climate control systems. The body shell serves as the mounting foundation for all body components and typically refers to the rigid spatial structure formed by major load-bearing elements such as longitudinal beams, cross members, pillars, and their connected sheet metal parts. Doors are mounted on the body shell via hinges and feature complex structures, playing a crucial role in ensuring the functional performance of the vehicle body. These sheet metal components form the spaces that accommodate the engine, wheels, and other parts.
2
1
Share

How to Determine the Condition of a Car Battery?

Use a battery discharge tester. Clamp the positive and negative test leads of the tester to the corresponding battery terminals, then press the test button and observe the readings on the tester's display. If the display shows a voltage above 9V, it indicates the battery is in good condition. If the voltage is below 9V but the needle remains steady at a certain value, it means the battery is undercharged and requires recharging. If the needle slowly drops, it indicates an internal short circuit in the battery.
12
2
Share

Why is the car screen not lighting up?

Car screen not lighting up is due to poor line contact, it is necessary to check in time whether there is a virtual connection in the line. It may also be because the power signal line has aged, you can try to replace it with a new one. If the black screen is resolved, it means that there is indeed a problem with the power signal line. The car display screen not only provides information such as navigation, reversing image, and vehicle fuel consumption for viewing, but also has a variety of multimedia entertainment systems for operation, which not only provides convenience for the people in the car but also improves the visual experience inside the car. If the car display screen fails, the inconvenience to the driver will be obvious. If there is a problem, it should be checked and repaired in time.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.