Which joint-venture Yamaha model offers better value for money?

How to Remove the Door Panel of a Sylphy?

The method to remove the door panel of a Sylphy is as follows: 1. Remove the control panel with wiring harness; 2. Unscrew the screws securing the door trim panel; 3. Remove the small decorative panel on the inner door trim; 4. Pry from the edge between the door panel and inner door trim to separate them; 5. Remove the screws at the bottom of the door, use a screwdriver to pry open a gap, pull outward with your hand, then lift the door panel upward to remove it. Taking the 2021 Sylphy as an example, it belongs to the compact car category, with body dimensions of: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, fuel tank capacity 50L, and trunk capacity 510L.

7

2

Share

Where is the car accelerator located?

The car accelerator is located on the right side below the driver's cabin. The working principle of the accelerator is: when the accelerator pedal is pressed, it directly controls the throttle valve. The throttle valve opening will increase, allowing more air to enter the engine. At this time, the ECU will command the fuel injection system to inject more fuel, causing the engine speed to rise and the car to accelerate. Solutions for engine humming when accelerating include: 1. Changing the engine oil; 2. Cleaning engine carbon deposits; 3. Replacing spark plugs; 4. Conducting a comprehensive inspection and maintenance of the vehicle. The reasons for engine humming when accelerating are: excessive engine carbon deposits, poor gasoline filtration, poor fuel quality, aging spark plugs, engine malfunction, and cylinder issues.

6

4

Share

What are the symptoms of a faulty thermostat in the Buick Excelle?

The symptoms of a faulty thermostat in the Buick Excelle are: 1. Coolant leakage; 2. Engine overheating; 3. Slow engine warm-up. Taking the 2021 Buick Excelle as an example, it belongs to the compact car category with body dimensions of: length 4609mm, width 1798mm, height 1464mm, a wheelbase of 2640mm, a fuel tank capacity of 44l, and a curb weight of 1270kg. The 2021 Buick Excelle features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113ps, a maximum power of 83kw, and a maximum torque of 141nm, paired with a 6-speed automatic manual transmission.

15

1

Share

What is the replacement method for the fuel tank cap motor of the Audi A6?

Audi A6 fuel tank cap motor replacement method is: 1. Open the fuel tank cap, insert 4 small flat-head screwdrivers or other disassembly tools into the four unopened notches around it, and pry simultaneously; 2. Use a Phillips screwdriver to remove the two screws securing the motor; 3. Use a flat-head screwdriver to pry open the housing where the motor is placed; 4. Replace the fuel tank cap motor. Taking the 2020 Audi A6 as an example, it is a mid-to-large-sized car with body dimensions of: length 4951mm, width 1886mm, height 1483mm, wheelbase 2925mm, minimum ground clearance 190mm, and body weight 1885kg.

10

3

Share

What is the displacement of the Bora?

The displacement of the Bora is 1.5L. Taking the 2021 Bora as an example, its body structure is a 4-door 5-seater sedan, with body dimensions of: length 4663mm, width 1815mm, height 1462mm, a wheelbase of 2688mm, a fuel tank capacity of 50L, a luggage compartment capacity of 506L, and a curb weight of 1320kg. The 2021 Bora features a front suspension system of MacPherson independent suspension and a rear suspension system of torsion beam non-independent suspension. It is equipped with a 1.2T turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission.

20

2

Share

How to Sell a Car Quickly?

Consult a 4S dealership or a used car company for an evaluation of your vehicle, or consider auctioning it. Below are the details: Maintain the Original and Authentic Condition of the Car: Keeping the car in its original and authentic condition is crucial. Minor scratches on the paintwork will factor into the depreciation rate, directly affecting the selling price. Generally, vehicles that have been involved in major accidents will show repair marks no matter how well they are fixed. To get a higher price, maintaining the original and authentic condition is key. Complete Documentation: When selling a used car, the transfer of ownership can only proceed if all documents are complete. Essential documents for the transaction include the vehicle registration certificate, driving license, purchase tax payment receipt, vehicle and vessel tax receipt, road maintenance fee payment receipt, insurance policy, annual inspection compliance sticker, environmental compliance sticker, warranty card, etc. Missing any of these documents can hinder the normal transfer process. Inquire About Market Conditions at Used Car Markets: The best way to understand the market is to consult a 4S dealership or a used car company for an evaluation. Reputable used car companies usually offer free evaluation services. Be clear about your selling price. When selling a used car, the speed of the sale and the price are often the main concerns. If you need to sell the car quickly, consider auctioning it.

18

0

Share

Which joint-venture Yamaha model offers better value for money?

How to Remove the Door Panel of a Sylphy?

Where is the car accelerator located?

What are the symptoms of a faulty thermostat in the Buick Excelle?

What is the replacement method for the fuel tank cap motor of the Audi A6?

What is the displacement of the Bora?

How to Sell a Car Quickly?

What are the differences between GLA, GLC, and GLK?

Where is the domestic BMW production plant located?

What is the normal temperature for car air conditioning?

What is the method for removing the rear seat cushion of a Santana?