Which Item Should Be Practiced First in Subject Two?

3 Answers
VonTyler
07/24/25 5:25am
In Subject Two, you first learn about the structure of the car, including adjusting the seat and rearview mirrors, as well as the importance of fastening the seatbelt before driving. Below is a detailed introduction to the lighting test mnemonic for Subject Two: Turn signal: Subject Two emphasizes turn signals, so don't forget them. Starting: Don't rush when starting the engine; turn on the left turn signal in sequence. Parallel parking: When exiting during parallel parking and during right-angle turns. Left signal: You can only proceed when the left signal is on, and don't forget it during hill starts. Below is additional information about Subject Three: Overview: Subject Three, also known as the road test, is part of the motor vehicle driver's license assessment. It refers to the road driving skills and safety and civilized driving knowledge test. Others: Starting from June 1, 2021, the interval for scheduling the Subject Three test was adjusted from 30 days after passing Subject One to 20 days. For those upgrading to a large or medium-sized passenger or truck driver's license, the interval was adjusted from 40 days to 30 days after passing Subject One.
Was this review help?
2
3
Share
RuthMarie
08/10/25 11:27pm
When I first started learning to drive, my instructor had me practice hill starts first because it's the most fundamental skill that helps you get familiar with coordinating the clutch and accelerator. Sitting in the car and starting with this small slope made me feel much less pressured. I remember during my first practice, I carefully controlled the brake and accelerator to avoid stalling or rolling back. Once I mastered this, parallel parking became much easier. Beginners should start with such simple tasks—they build operational confidence and reduce anxiety. Don’t rush to skip ahead to practice parallel parking or cornering; progressing step by step is better for laying a solid foundation. After repeatedly practicing basic maneuvers well, the entire learning process becomes smoother and safer.
Was this review help?
12
5
Share
Expand All
LaEsther
09/24/25 6:40am
As a beginner learning to drive, I recommend starting with practicing right-angle turns. This maneuver is relatively simple and allows you to practice steering and speed control in a low-risk environment. Sitting in the driver's seat, you only need to focus on turning the wheel and observing, without worrying about stalling like you might on a hill start. Once you've mastered this, you can move on to more challenging tasks like parallel parking or precision stopping, and the skills will naturally transition better. Stick to progressing from easy to difficult, avoiding high-difficulty maneuvers right away, as this can reduce frustration. This is the approach I took myself, gradually building up a feel for driving and making the learning process more enjoyable.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

What to do when the dashboard shows EPC?

ESP is the abbreviation of Electronic-Stability-Program, translated into Chinese as "Electronic Stability Program". It analyzes the vehicle driving state information transmitted from various sensors. Reasons and solutions for the dashboard displaying EPC: 1. The throttle is too dirty and should be cleaned. 2. The brake light is not working, requiring inspection of the brake switch and wiring. 3. Fuel quality issues can also cause the EPC warning light to illuminate, necessitating the use of qualified gasoline. 4. Insufficient battery power can also trigger the EPC warning light.
13
4
Share

What brand is the car with five bars?

The electric car with a logo of five vertical bars is WM Motor. Here is some relevant information: 1. WM Motor (WM-Motor) was established in January 2015 (formerly a three-electric system R&D enterprise founded by co-founder Du Ligang in 2012) and is committed to promoting the development and implementation of smart mobility. 2. The logo with five vertical bars was also used by Fiat in the mid-1980s. During the 1980s, Fiat's best-selling models included the Panda, Uno, and Croma. By the mid-1980s, these models required updates, leading to the creation of the five-bar logo. In the early 1980s, Fiat acquired Alfa Romeo, and the redesigned five-bar logo was somewhat related to Alfa.
11
4
Share

What time are express coaches prohibited from traveling?

Highways enforce a mandatory rest period for long-distance coaches from 2:00 AM to 5:00 AM. After 2:00 AM, long-distance coaches are prohibited from entering the highway via toll booths. During this period, coaches already on the highway are guided to the nearest service area or passenger station for rest. When driving normally on the highway, motor vehicles must adhere to the following regulations: 1. No reversing, driving in the opposite direction, or crossing the central divider to make a U-turn or turn. 2. No test driving or learning to drive a motor vehicle. 3. No overtaking or parking on ramps, acceleration lanes, or deceleration lanes. 4. No straddling or driving continuously on lane dividers or overtaking lanes. 5. No overtaking on the right. 6. Except in cases of obstacles or malfunctions requiring a stop, no arbitrary stopping, picking up/dropping off passengers, or loading/unloading goods. 7. Except for entering or exiting emergency stopping lanes or shoulders, no driving on emergency stopping lanes or shoulders.
1
3
Share

How to Remove the Headlight Switch of Passat?

Here is the method to remove the headlight switch of Passat: 1. Before starting the removal, turn off the car's ignition switch, press the combination switch with your fingers. 2. Turn the switch to the right, then pull it outward. 3. The headlight switch of Volkswagen cars does not require any removal tools and can be manually operated to remove the switch. Below is an introduction related to the lights: 1. Passat's light switches include two types, one is a rotary knob type, and the other is a lever type. The rotary light switch is located on the instrument panel at the lower left position of the driver's seat, while the lever switch is located on the left side of the steering wheel. The rotary knob switch includes front fog lights, rear fog lights, width lights, low beam lights, and a light-off button. Next to the knob, there is also a light height adjustment button, which can adjust the light projection height according to actual needs. 2. The lever-type light has the function of turning and switching between high and low beams. Turn the lever clockwise, the right turn signal lights up; turn the lever counterclockwise, the left turn signal lights up. After the turn is completed, the turn lever will automatically reset to its normal position. When the light combination switch is turned to the low beam, the low beam indicator light turns on. Press the light combination lever downward, the high beam indicator light turns on, and the high and low beams can be switched at any time.
7
4
Share

What to Do If the Vehicle Annual Inspection Sticker Is Lost?

Here are the steps to handle the loss of a vehicle annual inspection sticker: If the annual inspection sticker is lost, it can be reissued. Bring the original and a copy of the vehicle registration certificate and the owner's ID card to the local vehicle management office or inspection station in the city where the vehicle is registered. You will need to fill out a reissuance application form explaining the reason for the reissuance. Once approved, a new annual inspection sticker will be printed on-site. Note: In addition to the annual inspection compliance sticker, the upper right corner of the vehicle's front windshield should also display the insurance sticker and the environmental protection sticker to legally drive on the road. According to the "Road Traffic Safety Law," all vehicles on the road must display the current year's inspection sticker in a visible position on the upper right corner of the front windshield. Vehicles that fail to display the annual inspection compliance sticker as required will be penalized with a 1-point deduction and a fine of 50 yuan.
15
4
Share

How to adjust the fog lights on the Mazda3 Axela?

Mazda3 Axela fog light switch is located on the lighting switch assembly on the left side of the steering wheel, and the fog lights can be turned on or off by rotating the knob. Here is more information about fog lights: 1. The function of fog lights is to make other vehicles see your car in foggy or rainy weather when visibility is greatly affected by the weather. Therefore, the light source of fog lights needs to have strong penetration. 2. Most vehicles use halogen fog lights, and LED fog lights are more advanced than halogen fog lights. Extended content: The following is the classification of car lights: 1. Headlights. Combined headlights are located at the front of the car, mainly serving the purpose of lighting and signaling. The light emitted by the headlights can illuminate the road conditions in front of the car body, allowing the driver to drive safely at night. 2. Combined taillights. Combined taillights are located at the rear of the car, mainly serving the purpose of lighting and signaling. 3. Turn signals. Used to indicate to other road users that the vehicle is turning left or right. 4. License plate lights. License plate lights mainly illuminate the license plate, allowing people to identify the vehicle license plate at night.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.