Which is the most expensive Geely car model?

What is the difference between engine oil and lubricating oil?

Engine oil and lubricating oil differ in scope: engine oil is a type of lubricating oil, but not all lubricating oils are engine oil. Engine oil is often referred to as the lifeblood of an engine, as it performs functions such as lubrication, cleaning, sealing, heat dissipation, buffering, and rust prevention within the engine. Without engine oil, the engine would not function properly. When adding engine oil, it is essential to ensure that the oil level remains between the min and max marks on the dipstick. If the oil level falls below the min mark, the engine may experience insufficient lubrication. Lubricating oil serves to reduce friction and wear between moving parts, acts as a coolant by absorbing heat from the combustion chamber and piston top to cool the engine and prevent overheating, and functions as a sealant by filling the gaps between piston rings and cylinder liners to prevent combustion pressure leakage.

2

0

Share

What causes the security light to flash?

Reasons for the security light flashing include: damaged or poorly connected drivers. The anti-theft system is in a locked state. Reminding the driver to fasten the seat belt. Methods to deactivate the security light include: restarting the car engine. Turning off the main switch. Fastening the seat belt. The security light is a safety warning light, symbolized by an airbag, human figure, or seat belt pattern. After turning off the engine and locking the doors, the security light flashing is normal, indicating that the engine electronic anti-theft lock is working. If it does not flash, the anti-theft system is not activated, and simply closing the doors tightly will suffice. Depending on the car model, the reasons for the security light flashing may vary. In some Japanese cars, the security light flashes to indicate that the engine anti-theft device is active, and pressing the unlock button on the remote control can deactivate it. While driving, apart from the security light flashing, you might also encounter the engine yellow light flashing. If the engine fault light flashes, it is crucial to pull over and inspect the car promptly to prevent potential safety hazards during driving.

6

5

Share

How to Handle Penalty Points for Traffic Violations When Driving Someone Else's Car?

Methods for handling penalty points for traffic violations when driving someone else's car: The actual driver needs to bring their driver's license and the vehicle's registration certificate to the relevant authorities to accept the penalty. According to regulations, the traffic management department of the public security organ can impose penalties on the owner or manager of the vehicle involved in the violation based on traffic monitoring records. If the driver can be identified, penalties can be imposed accordingly. If the vehicle owner cannot prove the actual driver at the time of the violation to the traffic police, the registered owner of the vehicle will be penalized. Violation handling process: 1. Prepare materials: If only caught by an electronic eye, only the vehicle registration certificate is needed; if it's a speeding violation, prepare the vehicle registration certificate, driver's license, and a copy of each; if it's a parking ticket, bring the penalty decision notice and the vehicle registration certificate. 2. Go to the vehicle management office: After preparing the materials, go to the vehicle management office to check if the violation is genuine, review the photos, and then fill out a confirmation form. 3. Pay the fine: Take the confirmation form to the designated bank of the vehicle management office to pay the fine. 4. If the violation occurred in another location, it generally needs to be handled at the local traffic police station or vehicle management office where the violation took place.

8

2

Share

What does TPMS malfunction mean?

TPMS malfunction refers to a fault in the Tire Pressure Monitoring System. The TPMS warning light staying on may indicate that the air pressure in one of the tires is at a critical level or the sensor battery is low. If the TPMS warning light comes on while driving, you should immediately reduce speed, avoid sharp steering and sudden braking, and then check the tire pressure. Generally, when the tire pressure light comes on, it means there is an abnormality in the tire pressure, and the tire pressure sensor has detected incorrect pressure in one or more tires, causing the light to illuminate. Common reasons include: 1. The tire pressure sensor itself is faulty, causing the light to come on, or driving for too long with overinflated or underinflated tires; 2. A punctured tire, which usually leads to air leakage. If you can't identify which tire is affected, you can use a tire pressure gauge to measure the pressure.

14

4

Share

Which city does the license plate 'Ji D' belong to?

Ji D license plate belongs to Liaoyuan City in Jilin Province. The license plate codes for various cities in Jilin Province are as follows: Ji A is Changchun City, Ji B is Jilin City, Ji C is Siping City, Ji D is Liaoyuan City, Ji E is Tonghua City, Ji F is Baishan City, Ji G is Baicheng City, Ji H is Yanbian Korean Autonomous Prefecture, and Ji J is Songyuan City. The vehicle registration agency code consists of 2 characters, composed of Chinese characters and English letters. The Chinese character is the abbreviation of the province, autonomous region, or municipality directly under the central government, while the English letter represents the code of the vehicle management office. The English letter on the license plate indicates the prefecture-level city where the vehicle is registered, generally assigned by the provincial vehicle management office based on the status of each prefecture-level city, with A being the provincial capital, B the second largest city, and so on.

14

0

Share

What does 'snow' mean on a car?

On a car, 'snow' refers to the snow mode, which can be activated when driving on snowy or slippery road surfaces. To engage this mode, shift the gear lever to the D position and adjust the knob to snow mode. In this mode, the torque distribution between the front and rear wheels is set at 40:60, which helps improve the vehicle's grip by optimizing power distribution, thereby enhancing safety when driving on snow. Introduction to Snow Mode: 1. Snow mode specifically refers to the control mode selection of the car's automatic transmission. The automatic transmission's electronic control system determines the current gear based on key signals such as vehicle speed, engine RPM, accelerator pedal position, and other relevant signals. 2. Typically, cars are equipped with options for sport mode and snow mode, allowing drivers to choose the appropriate control mode based on environmental requirements to balance driving enjoyment and safety. 3. Snow mode incorporates certain automated procedures, such as starting in second gear to prevent wheel spin on icy or slippery surfaces, making it easier for drivers to control the vehicle in snowy conditions.

20

0

Share

Which is the most expensive Geely car model?

What is the difference between engine oil and lubricating oil?

What causes the security light to flash?

How to Handle Penalty Points for Traffic Violations When Driving Someone Else's Car?

What does TPMS malfunction mean?

Which city does the license plate 'Ji D' belong to?

What does 'snow' mean on a car?

Why Doesn't the Car Horn Work?

What Components Make Up a Car Audio System?

What Causes the High-Pitched Noise When Braking a Car?

Can I mix half 92 and half 98?