Which is higher between tire W and Y ratings?

How to Turn on the Headlight Cleaning Device of Nissan Sylphy?

The headlight cleaning device of Sylphy is located below the headlight, with a water outlet that can clean dust and dirt on the headlight at any time. To use it, turn the headlight switch to the auto position, then press the windshield wiper spray switch. Here is some information about the Sylphy: 1. The Sylphy is a compact car under Dongfeng Nissan. The exterior of the Sylphy is very fashionable and youthful. At the front, the grille has been replaced with an oversized U-shaped design, which looks very stylish. Combined with thick silver trim, it exudes a strong sense of quality and higher-grade feel. 2. In terms of dimensions, the length has been increased to 4641mm, making the space more spacious and the ride more comfortable. 3. In terms of power, the Sylphy is equipped with a 1.6L/1.8L naturally aspirated engine, with maximum power outputs of 93kW (126PS) and 102kW (139PS), and peak torques of 154N·m and 174N·m. The transmission system is matched with a 5MT and CVT continuously variable transmission.

6

0

Share

Which region does the license plate 'Shan A' belong to?

Currently, there is no 'Shan A' license plate; there are license plates from Shandong Province. The license plate codes for various regions in Shandong Province are as follows: Lu A is for Jinan City, Lu C for Zibo City, Lu D for Zaozhuang City, Lu E for Dongying City, Lu F for Yantai City, Lu G for Weifang City, Lu H for Jining City, Lu J for Tai'an City, Lu K for Weihai City, Lu L for Rizhao City, Lu M for Binzhou City, Lu N for Dezhou City, Lu P for Liaocheng City, Lu Q for Linyi City, Lu R for Heze City, Lu S for Laiwu City. Below is the distinction of license plate colors: 1. Blue is for small vehicle license plates. 2. Yellow license plates are for large vehicles, agricultural vehicles, or training vehicles. 3. White is for special vehicle license plates, such as military or police vehicles. 4. Black is for foreign investors or foreign enterprises bringing vehicles from abroad. 5. Gradient green represents small new energy vehicles.

8

2

Share

How to Solve Car Sunroof Leakage?

To address car sunroof leakage, it is necessary to inspect the drainage holes. Determine whether the sunroof drainage holes are blocked or if the sealing rubber strip has aged by checking the drainage condition. If it is confirmed that the car's drainage pipe is blocked, promptly visit a professional repair shop for treatment to avoid greater losses. Below is an introduction on preventing car sunroof leakage: 1. Regularly inspect the sunroof drainage outlets: The car sunroof drainage outlets are an important pathway for sunroof drainage. If not cleaned for a long time, it can easily lead to blockage of the drainage holes, resulting in water seepage. It is necessary to regularly inspect the sunroof drainage outlets and promptly clean any dust or fallen leaves to ensure normal drainage. 2. Regularly inspect the sunroof guide rails: Due to lack of attention during use, sand, fallen leaves, and other debris may accumulate on the sunroof guide rails. If not cleaned for a long time, it can damage the sunroof guide rails, making it impossible to close the sunroof properly and leading to leakage. 3. Regularly inspect the sunroof sealing rubber strip: With increased usage over time, the sunroof sealing rubber strip may also age. When the sealing rubber strip is severely aged, the sunroof may leak. 4. Avoid opening the sunroof on bumpy roads: Try not to use the car sunroof on bumpy roads, as they can easily cause deformation of the sunroof guide rails, affecting normal sealing.

15

4

Share

How to Drive the 10th-Generation Civic for Better Fuel Efficiency?

Here are methods to reduce fuel consumption for the 10th-generation Civic: 1. Enhance vehicle maintenance: The adjustment and maintenance of the car affect engine performance and driving resistance. Statistics show that poorly maintained engines can increase fuel consumption by 10% to 20%. Owners should regularly visit auto repair shops for routine maintenance, such as checking tire pressure, wheel alignment, adjusting brake pad and drum clearance, lubricating chassis points, timely oil changes, and filter inspections. 2. Avoid prolonged engine idling: Idling consumes significantly more fuel than normal driving. Therefore, if the vehicle is stationary for extended periods (e.g., waiting), it's best to turn off the engine. During cold starts, warm-up should not exceed 1 minute; maintaining low-speed driving for a few minutes is sufficient. 3. Minimize sudden braking and acceleration: Smooth and steady driving is most fuel-efficient. During acceleration, avoid stomping on the throttle—gradual acceleration is ideal. Once reaching a steady speed, maintain it as much as possible. In congested areas, anticipate road conditions to avoid sudden braking, which not only saves fuel but also extends vehicle lifespan. 4. Maintain an appropriate driving speed: Each car has an optimal fuel-efficient speed (typically 70–90 km/h for sedans, varying by model). At high speeds, resistance (mainly air resistance) increases dramatically.

6

4

Share

How to Clean Scale Inside the Engine?

Engine internal scale cleaning method is as follows: 1. After the engine is turned off, drain the cooling water and add cleaning agent; 2. Start the engine and run at medium speed for 5-10 minutes, then let it sit for 15 minutes; 3. Run at medium speed again for 5 minutes, then drain the cleaning agent. Repeat this process three to four times until the discharged cleaning agent is free of contaminants. More information about engine scale: 1. There are two commonly used cleaning agents for removing scale: one is adding 750g of caustic soda and 250g of kerosene to 5000g of water; the other is adding 1000g of baking soda and 500g of kerosene to 5000g of water. The amount of cleaning agent should be determined based on the volume of cooling water. 2. Excessive cooling water temperature caused by scale will also lead to high temperatures in the cylinders and intake passages, causing the mixed gas entering the cylinders to expand due to heat, reducing air intake, lowering engine power, increasing fuel consumption, and potentially causing "auto-ignition" or "knocking" phenomena.

4

1

Share

What does TC mean?

TC stands for Traction Control System, which enhances a vehicle's off-road capability. More details about TC are as follows: 1. When braking on slippery surfaces or during rapid acceleration, a car's wheels may slip, potentially causing loss of directional control. The Traction Control System is specifically designed to address this issue. When the ABS (Anti-lock Braking System) detects wheel slippage, it applies braking to the slipping wheels to prevent loss of traction. 2. When the system is active, the yellow TC indicator light on the dashboard will flash to alert the driver. The Traction Control System not only improves driving stability but also enhances acceleration and climbing ability.

3

5

Share

Which is higher between tire W and Y ratings?

How to Turn on the Headlight Cleaning Device of Nissan Sylphy?

Which region does the license plate 'Shan A' belong to?

How to Solve Car Sunroof Leakage?

How to Drive the 10th-Generation Civic for Better Fuel Efficiency?

How to Clean Scale Inside the Engine?

What does TC mean?

How late can you be for Subject 4 before being denied entry?

What are the causes of oil leakage in CB400X?

How to Restart the Internet Connection in Haval H6?

Is the Focus ST equipped with four-wheel drive?