Which Has a Larger Trunk, SUV or Sedan?

What are the differences between the Sylphy Intelligent Enjoyment Edition and the Comfort Enjoyment Edition?

The differences between the Sylphy Intelligent Enjoyment Edition and the Comfort Enjoyment Edition lie in their configurations: the Intelligent Enjoyment Edition is equipped with features such as active braking, fatigue driving reminder, driving recorder, and an SD card interface, while the Comfort Enjoyment Edition does not include these features. The Sylphy is a compact sedan under the Nissan brand, powered by a 1.6-liter naturally aspirated engine with the model code HR16, delivering a maximum power of 102kW and a maximum torque of 169Nm, paired with either a 5-speed manual transmission or a CVT transmission. The Sylphy adopts Nissan's new VMotion 2.0 design language, benefiting from the longer and wider chassis structure of Nissan's global CMF platform, achieving a 1.254 luxury car width-to-height ratio. It boasts an ultra-low drag coefficient of 0.26Cd, while the 1.5GPa UHSS high-rigidity body structure ensures enhanced driving safety.

4

2

Share

What is the wheelbase of the Citroën C2?

The wheelbase of the Citroën C2 is 2443mm, with body dimensions of 3878mm in length, 1676mm in width, and 1438mm in height. The Citroën C2 is a compact car featuring a MacPherson independent front suspension and a longitudinal swing-arm independent rear suspension. It is equipped with two engine options: a 1.4-liter naturally aspirated engine and a 1.6-liter naturally aspirated engine. The 1.4-liter engine delivers a maximum torque of 120 Nm, with a maximum power output at 5300 rpm and peak torque at 3400 rpm, paired with a 5-speed manual transmission. The 1.6-liter engine produces a maximum torque of 142 Nm, achieving maximum power at 5750 rpm and peak torque at 4000 rpm, mated to a 4AT transmission. Both engines utilize multi-point fuel injection technology and feature an aluminum cylinder head with a cast iron cylinder block.

16

2

Share

Where is the cabin air filter located in the Citroën C3-XR?

Citroën C3-XR's cabin air filter is located in the central tunnel next to the front passenger's left foot. Indications for cabin air filter replacement include: 1. Significant reduction in air flow from the AC vents, which suggests the filter is clogged and should be cleaned or replaced if necessary; 2. Cleaning frequency depends on road conditions (dusty roads, etc.); 3. In urban areas with poor air quality, it's recommended to replace the cabin air filter twice a year to maintain good health. The Citroën C3-XR is a vehicle produced by Dongfeng Citroën, based on the concept car CXR and featuring Citroën's ARTECH design language. The "C" in C3-XR stands for "Citroën"; the number "3" represents the vehicle class, and "XR" stands for "XRoad" (Unknown Road), symbolizing the exploration and aspiration for the unknown - representing both endless technological exploration and the relentless pursuit of a free and beautiful life.

20

5

Share

What engine is equipped in the Citroen C3-XR?

Citroen C3-XR is equipped with a 1.2T turbocharged engine and a 1.6L naturally aspirated engine, with maximum power outputs of 100kW and 86kW respectively, and peak torques of 230Nm and 150Nm respectively. The 1.2T turbocharged engine is paired with a 6-speed dual-clutch transmission, while the 1.6L naturally aspirated engine is paired with a 5-speed manual transmission. The Citroen C3-XR is a car produced by Dongfeng Citroen, based on the concept car CXR and adopting Citroen's ARTECH design language. The double horizontal chrome-plated grille makes the front look wider and thicker, and it is just connected with the internal decorative strips of the headlights, enhancing the sense of integration. The rear of the Citroen C3-XR features relatively rounded line designs, creating a visual contrast with the front. Additionally, both the front and rear are equipped with bottom edge protective panels to enhance the SUV style.

6

1

Share

How Many Seats Does a Minibus Have?

A minibus refers to a small passenger vehicle or car with fewer than 10 seats inside the cabin. A large bus refers to a large passenger vehicle with more than 20 seats inside the cabin, while a medium-sized bus refers to a mid-sized passenger vehicle with 10-19 seats inside the cabin. Below is additional information: 1. Large buses: Large buses are typically over 9 meters in length. Drivers are required to hold an A1 driver's license, and the application age must be between 26-50 years old. Some of the world's most renowned large bus brands include Daewoo, Volvo, Dennis, Scania, and King Long. Large buses usually travel long distances, often hundreds of kilometers. Most large buses have seats inside the cabin, while some are fully equipped with berths and have luggage racks or compartments for passengers' carry-on luggage, commonly known as 'sleeper buses.' 2. Medium-sized buses: Medium-sized buses are typically 6-9 meters in length. Drivers are required to hold a B1 driver's license, and the application age must be between 21-50 years old. Some of the world's most renowned medium-sized bus brands include Yutong, King Long, and Toyota Coaster. Due to their fewer seats and more spacious interiors, medium-sized buses are generally used as public buses. Some are also modified for use as airport shuttle buses. 3. Small passenger vehicles: Small passenger vehicles are typically under 6 meters in length. Small passenger vehicles and cars require drivers to hold a C1 driver's license, and the application age must be between 18-70 years old. Small passenger vehicles generally include sports cars, sedans, and microvans. Due to their compact size, they are usually suitable for family and company travel. Compared to medium-sized and large buses, small passenger vehicles have the advantages of lower prices, lower fuel consumption, and higher speed.

10

2

Share

How many points are deducted for stopping midway during parallel parking?

Stopping midway during parallel parking deducts 100 points. Below are specific techniques for the second subject of the driving test: 1. Slow speed: Maintaining a slow speed is the fundamental rule for practicing driving in subject two. Ensure the vehicle doesn't stop while keeping the speed as slow as possible; the slower, the better. A slow speed allows sufficient time to adjust each operation. 2. Adjust the rearview mirrors: After getting into the car, always adjust the rearview mirrors properly, which is particularly important for reverse parking and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During subject two operations, it's essential to accurately identify and observe these points to ensure precise positioning. 4. Pay attention to the four corners of the car: The front corner is prone to sweeping the outer line during reverse parking, while the rear corner is likely to sweep the side lines of the parking space; the front corner may cross the line during curve driving; the front corner may also cross the line during right-angle turns; during parallel parking, the front corner may sweep the outer line or the left front corner of the parking space, and the right rear corner may sweep the right parking space line. Therefore, always be mindful of the four corners and the outer boundary lines.

10

0

Share

Which Has a Larger Trunk, SUV or Sedan?

What are the differences between the Sylphy Intelligent Enjoyment Edition and the Comfort Enjoyment Edition?

What is the wheelbase of the Citroën C2?

Where is the cabin air filter located in the Citroën C3-XR?

What engine is equipped in the Citroen C3-XR?

How Many Seats Does a Minibus Have?

How many points are deducted for stopping midway during parallel parking?

What are the differences between the Exeed TX and Exeed LX?

What hatchback models does Citroën have?

What engine is used in the Citroën C2?

How many years can the CVT transmission of Emgrand generally last?