Which Gear is Reverse in an Automatic Transmission Car?

Will the annual bi-annual inspection for small cars be abolished?

For personal sedans and blue-plate minivans, the initial inspection is conducted biennially for the first six years after new vehicle registration; after six years, it becomes an annual inspection; after fifteen years, it transitions to bi-annual inspections; and after over twenty years, inspections occur quarterly. Currently, there are no plans to abolish the second annual inspection for vehicles. Vehicle annual inspection, also known as vehicle annual check, is a mandatory examination for all vehicles with official license plates and registration certificates. It serves as an annual health check for vehicles in accordance with the "Technical Conditions for Motor Vehicle Operation," aiming to promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Vehicle inspection cycle regulations: Operational large buses should be inspected annually within the first five years; after five years, inspections should occur every six months. Trucks and large to medium-sized non-operational passenger vehicles should be inspected annually within the first ten years; after ten years, inspections should occur every six months. Small and micro non-operational passenger vehicles should be inspected biennially within the first six years; after six years, inspections should occur annually; after fifteen years, inspections should occur every six months. Motorcycles should be inspected biennially within the first four years; after four years, inspections should occur annually. Tractors and other motor vehicles should be inspected annually. Operational motor vehicles that pass the safety technical inspection within the stipulated inspection period should not undergo repeated safety technical inspections. Vehicles exceeding the scrapping age limit cannot be transferred (sold) but may continue to be used; if you wish to purchase or sell such a vehicle, you can proceed to the vehicle management office to process the vehicle scrapping certificate (canceling the vehicle file) before purchasing or selling.

5

Share

Is the BYD Han AWD a Full-Time AWD System?

BYD Han AWD is a full-time AWD system. Here are the specific details about the BYD Han: 1. The BYD Han is a flagship new energy vehicle launched by BYD Auto in 2020. It is a B-segment car with body dimensions of 4980 (4960)/1910/1495mm and a wheelbase of 2920mm. 2. The 2.0-liter turbocharged engine of the BYD Han has a maximum power output of 141kW and a maximum torque of 320 Nm. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. The electric motor paired with this engine has a maximum power output of 180kW and a maximum torque of 330 Nm.

20

1

Share

Should the 2021 Sagitar use 92 or 95 octane gasoline?

The 2021 Sagitar should use 95 octane gasoline. Here are the specific details about refueling: 1. Although 95 octane gasoline has higher anti-knock properties and power performance, vehicles designed for lower octane fuel should not blindly opt for higher octane gasoline. Higher octane ratings are more suitable for engines with larger compression ratios, while engines designed for 92 octane often have smaller compression ratios. Using 95 octane gasoline in such engines may increase engine knocking. 2. Different octane ratings of gasoline should not be mixed. For example, mixing 92 and 95 octane gasoline is not recommended, as long-term use could potentially affect the engine, leading to issues such as carbon deposits and increased fuel consumption.

8

3

Share

How to Replace Coolant in Volkswagen Tiguan?

Volkswagen Tiguan coolant replacement method is: 1. Let the vehicle stand for half an hour, then unscrew the drain screw at the bottom of the radiator. When no more coolant flows from the drain outlet, the old coolant is basically drained; 2. Keep the vehicle idling while continuously adding clean water to the coolant reservoir; 3. After the water stops dripping, tighten the drain valve and turn off the engine. Pour new coolant into the reservoir, ensuring the fluid level is between the MAX and MIN marks; 4. Start the engine again and let it idle to further expel air from the cooling system pipes. The coolant level will drop slightly; 5. Once the level stabilizes, top up the coolant to between MIN and MAX marks.

3

2

Share

Where is the engine oil dipstick located?

The engine oil dipstick is located in the engine compartment. Open the engine hood, and you'll find a yellow pull ring at the front of the engine - that's the oil dipstick. Here's how to operate it: 1. Park the car on level ground and turn off the engine; 2. Pull out the oil dipstick and wipe it clean with a tissue or cloth; 3. Reinsert the dipstick into the oil hole, then pull it out again to check the oil level against the dipstick's markings. If the oil level is between the upper and lower marks, the oil quantity is correct; if the dipstick doesn't reach the lower mark, it means the oil is insufficient and needs to be topped up; if oil covers the area above the upper mark, it indicates overfilling and excess oil needs to be drained.

19

4

Share

Where is the OBD port on the old Jetta?

The OBD port on the old Jetta is located above the clutch pedal. Open the cover outside the fuse box, and you'll find it on the right side of the fuse box base. Here's some relevant information about the OBD interface: 1. OBD, as an abbreviation for a proprietary term, stands for On-Board Diagnostics, which means vehicle self-diagnosis system in Chinese. 2. This system can monitor the working conditions of the engine's electronic control system and other functional modules of the vehicle in real-time during operation. If any abnormal conditions are detected, it will determine the specific fault based on specific algorithms and store the diagnostic trouble code in the system's memory. 3. The useful information obtained from the system's self-diagnosis can assist in vehicle maintenance and repair. Technicians can use the vehicle's original specialized equipment to read the fault codes, enabling quick fault localization for vehicle repairs and reducing manual diagnosis time.

20

5

Share

Which Gear is Reverse in an Automatic Transmission Car?

Will the annual bi-annual inspection for small cars be abolished?

Is the BYD Han AWD a Full-Time AWD System?

Should the 2021 Sagitar use 92 or 95 octane gasoline?

How to Replace Coolant in Volkswagen Tiguan?

Where is the engine oil dipstick located?

Where is the OBD port on the old Jetta?

How to Smooth Out After Applying Touch-Up Paint Pen?

Severe Vibration in Three-Cylinder Engines After Three Years?

How to Identify if a Car is a Stock Vehicle?

What does car ATM mean?