···
Log in / Register

Which gear is for forward movement in an automatic transmission car?

4 Answers
AlexandraLee
08/30/25 5:50am

In an automatic transmission car, the D gear is for forward movement. The gears in an automatic transmission car are as follows: 1. P gear is for parking; 2. R gear is for reverse; 3. N gear is neutral; 4. S gear is for sports mode; 5. L gear is for low speed; 6. M gear is the manual mode in semi-automatic transmission cars. The steps to start an automatic transmission car are: 1. Press the brake to slow down and stop; 2. Shift the gear from D to N; 3. Engage the handbrake and turn off the engine; 4. Release the foot brake, but do not turn off the power; 5. Press the foot brake and shift the gear from N to P; 6. Release the foot brake; 7. Turn the key back, turn off the power, and pull out the key.

Was this review help?
10
3
Share
KingstonRose
09/12/25 2:57am

In an automatic transmission car, the forward gear is marked with a 'D', which stands for Drive. I've been driving manual cars for years, and when I switched to automatic, I was a bit confused at first, but after driving a few times, I got the hang of it: shift into D gear, and the car moves forward steadily, perfect for daily commutes or long-distance trips. Don't forget about the other gears—P (Park) is for parking, engage it after braking to prevent rolling; R (Reverse) is used for backing up; N (Neutral) is fine for towing or short stops like at a red light, but it's not recommended for prolonged use as it can wear out the transmission. Beginners new to automatic transmissions might get nervous and shift incorrectly, so always check the gear lever position before driving and practice a few times to get comfortable. Safety first—ensure the gear is correct before setting off, and don't rush or take risks.

Was this review help?
9
1
Share
Expand All
DelAubree
10/26/25 3:45am

As an average car owner, I often get asked about automatic transmissions. The drive gear is simple - it's that D position marked 'Drive'. After starting the engine, press the brake pedal and shift the gear lever to this position, and your car will move forward smoothly. Don't underestimate this small gear position - it handles most driving scenarios perfectly, whether you're speeding on highways or crawling in traffic jams. By the way, here are other gears: P for parking lock, R for reverse, and N for neutral/idling. When I bought my car, the salesperson didn't explain in detail, and I almost caused an accident by mistakenly shifting to R on a slope! So practice on flat ground first to get the feel. Automatic transmissions are designed to make driving easier, don't overcomplicate it.

Was this review help?
16
5
Share
Expand All
LeMaya
12/09/25 4:05am

When driving family members around in an automatic transmission car, the D (Drive) gear is the key forward gear. Engaging it allows the car to move smoothly without dealing with a clutch. Driving an automatic is straightforward: after starting the engine, press the brake pedal, shift the gear lever to D position to enter drive mode; releasing the brake enables slow movement, while pressing the accelerator speeds up. However, it's crucial to understand other gear functions too – always shift to P (Park) to lock the vehicle when parked, and avoid accidentally engaging R (Reverse) or N (Neutral) to prevent accidents. Especially on slippery roads during rain or snow, always confirm gear position beforehand and avoid distractions like checking phones. With more practice, you'll get familiar with it – arriving home safely is what matters most.

Was this review help?
18
2
Share
Expand All
More Forum Discussions

Where is the air conditioning filter of the Arrizo 7 located?

The air conditioning filter of the Arrizo 7 is located inside the glove box. You need to remove the glove box in front of the passenger seat, look down to see it, and then pull it out by holding both sides. Functions of the air conditioning filter: 1. Ensure that as little unfiltered air as possible enters the cabin; 2. Adsorb harmful substances and moisture in the air; 3. Filter solid impurities such as dust, pollen, and grinding particles in the air; 4. Ensure clean air in the driving compartment. In terms of appearance, the Arrizo 7 features a simple yet prominent contour design with eagle-eye convex headlights, using an integrated high/low beam lens headlight along with a hidden turn signal design. In terms of configuration, the Arrizo 7 is equipped with various functional devices, including a trip computer, multifunction steering wheel, and heated rearview mirrors.
18
5
Share

Does the BYD Qin Plus DM-i require a charging station?

The Qin Plus DM-i requires a charging station. The Qin PLUS Super Hybrid is equipped with a DM-i Super Hybrid dedicated Blade Battery, featuring the world's first pulse self-heating technology and globally leading refrigerant cooling technology, ensuring both ultra-long lifespan and reliable safety. Functions of charging stations: Charging stations (plugs) can achieve timed charging, electricity metering, and cost calculation, serving as terminals for citizens to purchase electricity. At the same time, to improve the efficiency and practicality of public charging stations (plugs), functions such as one station (plug) charging multiple vehicles and charging for electric bicycles will be gradually added in the future. Energy replenishment devices: As energy replenishment devices for electric vehicles, the charging performance of electric vehicle charging stations is related to the service life and charging time of the battery pack. This is also one of the aspects that consumers are most concerned about before purchasing an electric vehicle. The basic principle of electric vehicle charger design is to achieve fast, efficient, safe, and reasonable power replenishment for power batteries. Additionally, the applicability of the charger to various power batteries must also be considered.
13
5
Share

Where is the Buick's cabin air filter located?

The Buick's cabin air filter is located on the left side of the engine compartment. The air filter in Buick vehicles should be replaced every 20,000 kilometers, but owners can decide the replacement interval based on the actual usage conditions of the vehicle. The filter element is the core component of the filter, made of special materials, and is considered a wear part that requires specific maintenance and care. Among them, the Buick LaCrosse has dimensions of 5031mm in length, 1853mm in width, and 1458mm in height, with a wheelbase of 2807mm. Its equipped engine delivers a maximum horsepower of 169Ps, a maximum power of 124kW, and a maximum torque of 250Nm.
7
3
Share

What are the reasons why the car throttle cannot be increased?

The reasons why the car throttle cannot be increased are: 1. Fuel line blockage; 2. Exhaust system blockage; 3. Excessive carbon buildup in the throttle. The throttle, also known as the air valve or throttle valve, refers to the control device that regulates engine power. The throttle position is manipulated by the driver in the cockpit via the throttle lever, transmitted through control system components such as rods, rocker arms, torque tubes, cables, pulleys, and sector gears to the carburetor or fuel regulator on the engine. The car's throttle pedal does not directly control the fuel injection volume but rather the throttle opening. When the throttle pedal is pressed, the throttle opening increases, allowing more air to enter the engine, which in turn prompts the fuel injection system to inject more fuel.
13
5
Share

What to Do When the BMW 5 Series Auto Hold Fails?

Solutions for BMW 5 Series auto hold failure: 1. Safely park the vehicle and restart it to see if the function can be restored; 2. Reprogram the EMF control module; 3. Check based on the fault codes—if the parking servo motor fault code is reported, inspect the parking servo motor and its circuit; 4. If there are no fault codes, examine the entire related circuit; 5. If no issues are found, consider replacing the EMF module and inspecting other control systems. The BMW 5 Series has dimensions of 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm, and features a front-engine, rear-wheel-drive layout. It is equipped with a 2.0T turbocharged engine paired with an 8-speed automatic transmission, delivering a maximum power of 135kW and a maximum torque of 290Nm.
6
2
Share

What is the method for removing and installing the rearview mirror on a Nissan Sunny?

Nissan Sunny rearview mirror removal and installation method: Lift the clip at the junction between the rearview mirror and the windshield by hand, then pull the mirror upward to remove it. Rearview mirrors can be categorized by installation position as exterior mirrors, lower mirrors, and interior mirrors. Exterior mirrors show the rear sides of the vehicle, lower mirrors display the area below the front, while interior mirrors reflect the rear view and interior cabin conditions. The Nissan Sunny measures 4456mm in length, 1696mm in width, and 1514mm in height, with a wheelbase of 2600mm. Its front track is 1470mm and rear track 1475mm. The engine delivers maximum power of 112 horsepower (112Ps), with peak output of 82kW and maximum torque of 139Nm.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.